PSB Imagine S

Tri-mode surround speakers (Gloss White)

  • PSB Imagine S

    Gloss White

  • PSB Imagine S


  • PSB Imagine S

  • PSB Imagine S

Item #: 760IMGNSGW
Low Stock
Your price $1,359.99 pair
Available options:
Add to cart

Our take on the PSB Imagine S

by Dave Bar

Versatile surround speakers accommodate virtually any kind of home theater setup

PSB's elegant-looking Imagine S speakers prove that great things do come in small packages. They're voiced to match the tower and bookshelf speakers in the Imagine line, and they provide enveloping surround-channel effects for immersive home theater. The Imagine line borrows technology developed for PSB's higher-end Synchrony series, so you get audiophile-quality performance in a high-value speaker. The Imagine S speakers each feature two aluminum baffles set at an angle to each other, each containing a 1" tweeter mounted below a 5-1/4" woofer. Their Tri-mode Surround™ design means you can wire them in three different configurations, depending on your setup:

  • dipole: gives you diffuse sound, ideal when the speakers are placed to the sides of the listening area
  • bipole: more direct sound, better for when the speakers are placed behind the listening area
  • dual monopole: wire one set of drivers to a "surround" channel, and the other to a "rear" channel on your receiver — lets you take advantage of 6.1- or 7.1-channel sound using only a single pair of speakers in the back of your room
Imagine family

PSB's Imagine speaker family (Imagine S shown center bottom)

Read more

Precise driver design for natural sound


The drivers are mounted flush with the smooth front baffles, for improved sound dispersion.

The Imagine Ss each feature two highly accurate 1" titanium dome tweeters that produce smooth, sparkling highs. The 5-1/4" woofers use a proprietary ceramic-filled polypropylene cone, which makes them very stiff and light. The resulting midrange is clean and balanced, with tight bass response. Highly efficient motor structures with unique compound magnets help reduce audible distortion. It all adds up to seamless sound as special effects move from side-to-side and overhead.


PSB's Imagine speakers feature acoustically inert enclosures, with seamless, unbroken surfaces that are beautiful to look at.

Solid, elegantly curved cabinets with a real-wood veneer finish

All Imagine speakers have smooth, 1-1/2" thick front baffles that blend almost seamlessly with the seven-layer laminated MDF side, top, and bottom panels. Plus, the heavy internal bracing ensures an impressively solid, acoustically inert enclosure. The top, side, and bottom panels are clad in real wood veneer that's hand selected for its beauty and quality.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.


  • frequency response: 65-23,000 Hz (±3dB)
  • sensitivity: 89 dB
  • 4-ohm impedance — suited for high-current amplifiers
  • recommended power: 20-150 watts
  • dual 1" titanium dome tweeters with neodymium magnets
  • dual 5-1/4" injection-molded, clay ceramic-filled polypropylene woofers
  • acoustic suspension (sealed) design
  • hand-selected, real wood veneer finish
  • dipole/bipole/dual channel monopole wiring options
  • two sets of gold-plated five way binding posts — can be bi-wired
  • 10-3/4"W x 12-5/8"H x 7-1/8"D
  • warranty: 5 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Enclosure Acoustic Suspension
Bipole or Dipole Both
Tweeter Dome
Midrange size (inches) ---
Woofer size (inches) 5-1/4
Connector Type 5-way posts
Power Range 20-150
Sensitivity 89 dB
Impedance (Ohms) 4
Frequency Response 65-23k Hz
Height (inches) 12 5/8
Width (inches) 10 3/4
Depth (inches) 7 1/8
Weight (pounds) 16.3
Mounting Bracket Included Yes
Parts Warranty 5 Years
Labor Warranty 5 Years
Product Research
What's in the box?

  • 2 Dipole/Bipole surround speakers
  • 4 Grilles
  • 6 Adhesive backed rubber feet
  • 4 Input terminal jumpers (installed)
  • 4 Input terminal jumper wires (each is 3" long and has spade connectors on both ends)
  • 2 Wall mount brackets
  • 8 Drywall anchors
  • 8 Self-tapping screws
  • Owner's manual (English/ French/ Spanish)
  • Specification and Wiring guide (English/ French/ Spanish)
  • Warranty information
  • Wall mounting template
  • psb website information

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Driver Technology
Mounting Options

Driver Technology

Surround Design: An Imagine S speaker is two 2-way speakers built into one cabinet; each having its own woofer, tweeter, and crossover. The drivers are mounted on baffles facing in different directions, approximately 120° apart. Because the two speaker sections are wired to discrete terminals there are multiple ways to connect the drivers; as a dipole speaker (out of phase using the included jumper wires), as a bipole speaker (in phase using the factory installed jumpers), or as two separate channels. If you're mounting the speakers on the side walls in line with your listening position, the dipole mode will create a diffuse, ambient soundfield. If you're placing them behind your listening position, the bipole mode fires the drivers in phase to flood the area with surround sound. It's also possible to use one pair of Imagine S speakers for both surround and surround back channels, wiring the forward firing baffles to the surround channels and the rear firing baffles to the surround back channels.

Cone Design: The woofer cones are ceramic filled polypropylene and use rubber surrounds. The aluminum phase plug mechanically smoothes the response and acts as a heat sink for the voice coil, reducing power compression.

Tweeter: The 1" titanium, Ferrofluid cooled dome tweeters' light yet rigid diaphragm and over hung voice coil, combined with a computer optimized magnetic circuit produce an extended high frequency response that remains distortion free even at extreme volume levels. The front baffle is designed to eliminate mid and high frequency diffractions, maximizing three dimensional realism.

Crossover Network: The crossovers (two networks per speaker) are 2-way acoustical fourth order Linkwitz-Riley type with a 24 dB/octave slope. Tight tolerances were used when choosing the crossover components; heavy multi-laminated iron cores are used for large value inductors, high gauge wire air core inductors are used for medium and small values, all the capacitors are low loss and film capacitors are used for the midrange and treble frequencies. The tweeters and woofers are crossed over at 2,000 Hz.


Dual Binding Posts: The dual 5-way binding post input terminals are located on the lower rear of the speaker cabinet. Out of the box the two sets of binding posts are shorted together (in phase) by gold-plated jumpers. With the jumpers removed the two sections of the speaker can be wired out of phase (dipole) using the included jumper wires, or wired to separate channels. The binding posts will accept spade connectors, single or dual banana plugs, pin connectors, and bare wire up to 8 gauge.

Note: If wall mounting the speakers, banana plug connectors should not be used (they protrude too far and the speakers won't hang properly using the included brackets).

Mounting Options

Mounting: The Imagine S can be wall mounted using the included brackets. The bracket adds approximately 1/4" to the depth of the speaker.


Frequency Response:

  • On Axis @ 0°: 65-23,000 Hz (+/-3 dB)
  • On Axis @ 0°: 68-20,000 Hz (+/-1.5 dB)
  • Off Axis @ 30°: 68-10,000 Hz (+/-1.5 dB)
  • Low Frequency Cutoff -10 dB: 58 Hz


  • Anechoic Chamber: 87 dB
  • Typical Listening Room: 89 dB
Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Add accessories for the PSB Imagine S

You'll need speaker wire to connect your surround speakers to your amp or receiver. No wire is included with this speaker. See all categories & accessories

Monster Cable SuperFlat™ Mini Decor-friendly speaker cable with gold pin connectors (50-foot spool)
25 people say
Your Price: $34.95
Add to Cart
AudioQuest X2 Speaker Cable 14-gauge cable, connectors optional (30 feet, Gray)
25 people say
Your Price: $58.99
Add to Cart
AudioQuest G2 Speaker Cable 16-gauge cable, connectors optional (30 feet, Gray)
19 people say
Your Price: $38.99
Add to Cart
Monster XPHP™ MKII Speaker cable with clear jacket (100 feet)
8 people say
Your Price: $99.95
Add to Cart
Monster XP® Speaker cable with clear jacket, connectors optional (100 feet)
50 people say
Your Price: $64.95
Add to Cart
Monster XP® Navajo White MkII Speaker cable (50 feet)
2 people say
Your Price: $39.95
Add to Cart
3 people say
Your Price: $14.95
Add to Cart
64 people say
Your Price: $19.95
Add to Cart
10 people say
Your Price: $11.95
Add to Cart
4 people say
Your Price: $15.95
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the PSB Imagine S, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_760IMGNSGW/PSB-Imagine-S-Gloss-White.html ).