True-to-Nature Sound: The PSB Imagine mini C center-channel loudspeaker
produces a large soundstage and impressive bass along with the true-to-nature sound
for which PSB is known. The PSB Imagine mini C has a wide frequency and dynamic range,
natural tonal balance, and precise spatial imaging needed to make both music and
movies lifelike and enjoyable.
Two-Way Design: The PSB Imagine mini C employs a two-way speaker
design. It houses a single 1" ferrofluid-cooled titanium dome tweeter with
a neodymium magnet and tw0 4" clay/ceramic filled polypropylene woofers
with rubber surround. The result is startlingly big and commanding sound with
fine detail and emotion.
- 1" Titanium Dome Tweeter: The 1"
titanium dome, ferrofluid-cooled tweeters use a neodymium magnet
structure to help extend the frequency response at both ends for
effortless, airy top octaves and smooth, uncolored response.
- Dual 4" Clay/Ceramic Filled Polypropylene Woofers: Dual
4" woofer cones are clay/ceramic filled polypropylene to optimize the
combination of stiffness, internal damping, and low mass. The woofer's
magnetically neutral polycarbonate basket contributes additional stiffness,
and the bullet-shaped phase-plug enhances linearity at higher frequencies.
Crossover Network: PSB engineers designed the crossover frequency
very low relative to the woofer size in order to provide the same sound no matter
where the speaker is placed. The crossover is a 2-way acoustical fourth order
Linkwitz-Riley type with a 24 dB/octave slope. The tweeter and woofers are crossed
over at 2,200 Hz.
Small Cabinet: The PSB Imagine mini C center-channel loudspeaker is
the smallest center speaker of the imagine family. The cabinet measures just
(w) x 5.9375" (h) x 8" (d), and weighs only 9.8 lbs.
Bass Reflex Enclosure: The PSB Imagine mini C center-channel
loudspeaker uses a bass reflex enclosure with a rear-firing port for higher
efficiency and deeper bass. There is an included port plug to decrease the
amount of bass output from the speaker cabinet.
Detachable Grille: The PSB Imagine mini C includes a detachable
Binding Posts: The binding post input terminals are located on
the back-panel of the speaker cabinet. The binding posts will accept spade connectors,
pin connectors, banana plugs (single/dual), and bare wire up to 8 gauge.
Color-Coded: The speaker's binding posts are color-coded
(red/black) for easy identification between positive and negative.
Rubber Base: The PSB Imagine mini C features an integrated
rubber base to help secure the speaker in place to prevent slippage and vibration.
Placement: You should place the PSB Imagine mini C
loudspeaker directly above or below the center of your TV screen.
- On Axis @ 0°: 55-23,000 Hz (+/-3 dB)
- On Axis @ 0°: 65-20,000 Hz (+/-1.5 dB)
- Off Axis @ 30°: 65-10,000 Hz (+/-1.5 dB)
- Low Frequency Cutoff -10 dB: 50 Hz
- Anechoic Chamber: 86 dB
- Typical Listening Room: 88 dB
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.