Chat
Contact us
Close contact box
Connect ID #
023 074 797 4
Connect ID #
023 074 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

PSB SubSeries 1 Powered subwoofer

Item # 760SUB1

Deep bass and easy access to controls Are you looking to add some extra bass excitement to your system? The...

Deep bass and easy access to controls Are you looking to add some extra bass excitement to your system? The...

Item # 760SUB1

Shop all PSB Powered Subwoofers

About the PSB SubSeries 1

Kristen Schaub
Deep bass and easy access to controls
Are you looking to add some extra bass excitement to your system? The SubSeries 1 is guaranteed to dish out low, loud, and musically lifelike bass whenever your music and movies demand it. Feel the rumble of explosions in Hollywood blockbusters, hear the crowds roar when you score a goal in your favorite video games, or relax to the taut, tuneful lows of an upright bass from a classic jazz number.

Deep bass and easy access to controls
Are you looking to add some extra bass excitement to your system? The SubSeries 1 is guaranteed to dish out low, loud, and musically lifelike bass whenever your music and movies demand it. Feel the rumble of explosions in Hollywood blockbusters, hear the crowds roar when you score a goal in your favorite video games, or relax to the taut, tuneful lows of an upright bass from a classic jazz number.

It's all thanks to this sub's 8" woofer cone, which is designed to pump out quick, controlled, lifelike bass. It's backed by 110 watts of continuous power courtesy of the sub's built-in amplifier. Plus, the front-mounted controls make it simple to adjust the volume and crossover frequency, so you can get the best performance in your room.

READ LESS

Product highlights:

  • frequency response 36-150 Hz (±3dB)
  • built-in amplifier delivers 110 watts of continuous power, 280 watts dynamic peak power
  • continuously variable low-pass 50-150 Hz crossover
  • 8" polypropylene woofer cone
  • bass-reflex (ported) enclosure
  • front-mounted volume and crossover
  • rear-mounted phase switch and auto on/off
  • line-level/LFE and speaker-level inputs
  • black ash finish
  • 9-5/8"W x 14-1/8"H x 17-1/2"D
  • weight: 23.5 lbs.
  • warranty: 5 years subwoofer, 1 year amplifier
  • MFR # SubSeries 1

What's in the box:

  • Powered subwoofer
  • 8.25' AC power cord (IEC 2-prong type)
  • Owner's Guide (Eng / Fre / Span)
  • Limited Warranty sheet

Customer reviews for PSB SubSeries 1

We don't have any reviews, yet.
Submit a review and then enter to win a $350 gift card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the PSB SubSeries 1

Stacey B.

Features & specs

Enclosure Bass Reflex
Woofer Size (inches) 8
Woofer Composition Polypropylene
Firing Direction Front
Amplifier Output (watts) 110
Frequency Response 36-150 Hz
Connections
Preamp-Level Inputs Yes
Speaker-Level Inputs Yes
Speaker-Level Outputs No
Wireless No
Controls
Low-Pass Crossover Freq 50-150Hz
High-Pass Crossover Freq None
Phase Switch Yes
App Control ---
Remote ---
Other Info
Height (inches) 14-1/8
Width (inches) 9-5/8
Depth (inches) 15-5/8
Weight 23.8 lbs
Speaker Parts Warranty 5 Years
Speaker Labor Warranty 5 Years
Amplifier Parts Warranty 1 Year
Amplifier Labor Warranty 1 Year

Product Research

Features

Overview: The PSB Speakers SubSeries 1 is a powered subwoofer, featuring a front-firing 8" polypropylene cone woofer with a rubber surround. The woofer is driven by a 110-watt RMS (140 watts dynamic, 280 watts peak), Class AB amplifier. The SubSeries 1 has a front-firing 1" x 8" slot port, a textured black vinyl finish, and a removable black aluminum grille. The subwoofer is magnetically shielded, so it can be placed near CRT-type TVs without causing picture interference.

Auto Power Mode: The subwoofer features a main power switch on the back panel. When switched to On, the subwoofer is initially in stand-by mode, awaiting the presence of an audio signal. When the signal is received, the subwoofer turns on automatically. When no signal is detected, the sub's amp will automatically turn off after approximately 15 minutes. In the Off position, the subwoofer will not power up. A green LED, located on the front panel between the control knobs, will glow when the subwoofer is active.

Control Knobs: Two rotary control knobs are provided on the front of the subwoofer. One controls the output level of the subwoofer, relative to the volume of the other speakers in the system. The other control adjusts the high-frequency roll-off of signals sent to the subwoofer. The control is continuously variable from 50 Hz to 150 Hz, and allows you to precisely match the subwoofer's bass production with the main left and right stereo speakers.

Phase Control: The phase switch allows for the adjustment of the phase of the subwoofer in relation to the speakers used in the system, either 0 or 180 degrees.

Inputs: The SubSeries 1 can be connected by the following methods:

  • Low Level Input: Two gold-plated RCA jacks are provided for connecting your receiver via the low-level input. You can use a single RCA cable to connect the Subwoofer or LFE (low frequency effects) Output from your receiver, preamplifier, or integrated amp. Either the left or right channel inputs can be used. Since most subwoofer/LFE outputs are filtered by most receivers/processors, the subwoofer's variable low-pass filter is usually not required and should be bypassed. This is done by placing the crossover switch to the External Crossover (LFE Input) position. If your receiver or integrated amplifier has preamp outputs, or if you are using a preamplifier without a designated subwoofer/LFE output, the preferred connection is to use a stereo RCA cable plugged into both left and right inputs. If the preamp outputs are unfiltered, the subwoofer's internal crossover should be used and the switch placed in the "Internal Crossover" position.
  • Speaker Level In: Two pairs of 5-way binding post terminals (for left and right channel) are provided for connecting the sub with speaker wire. The terminals will accept bare wire, spade lugs, pin connectors, and single or dual banana plugs. The plastic inserts must first be removed from the terminals before using banana plugs. Speaker wires can also be run from the subwoofer directly to the main speakers, eliminating the need to run wires from the receiver or amplifier to the main speakers.

Power Cord: The subwoofer has a removable power cord with an IEC 2-pronged connector. This allows you to use a third-party IEC-type power cord, if desired.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound