1.888.955.6000
crutchfield.com
Crutchfield

Sound Ordnance BB10-64S

Sealed single 10" subwoofer enclosure

Zoom
  • Sound Ordnance BB10-64S

    Front

  • Sound Ordnance BB10-64S

    Back

  • Sound Ordnance BB10-64S

Crutchfield OMC logo
We don't check this item for fit or compatibility.
 

Our take on the Sound Ordnance BB10-64S

by John Pollard
Sound Ordnance

Why do I need an enclosure?

An enclosure is simply the box that houses your sub; sealed and ported enclosures are the most popular types. A sealed enclosure is usually smaller in size, sacrificing a little volume level to deliver more accurate bass. The ported enclosure features a vent which allows bass waves to escape from behind the mounted sub, augmenting the bass coming off the front of the sub. Ported boxes are louder, bigger, and a little less accurate. Every sub works best in the size and type of enclosure that's recommended by the manufacturer, so make sure you match your sub with the right box.

Sound Ordnance's rugged Bass Bunker enclosures come built to last and ready to help your sub deliver real low-frequency firepower. These unloaded boxes feature high-grade, medium-density fiberboard construction, with sealed inner braces that help combat resonance by reducing vibrations. Rounded outside corners and recessed panels allow them to fit into more vehicles, while tough black carpeting defends against incoming nicks and scratches. Bass Bunkers make a great solution when building your own box is not an option.

Read more

The BB10-64S sealed enclosure holds one 10" subwoofer and offers an internal volume of 0.69 cubic feet. Just add the right sub, amp, and wiring, then mount the enclosure securely, and you're ready to hit the road with some real bass artillery in your arsenal.

Warning: This enclosure does not include mounting hardware. If you're buying a sub from us, please check "What's in the Box?" to see if screws are included. If not, you should have an assortment of heavy-duty wood screws on hand for the installation.

Highlights:

  • sealed hatchback style enclosure for one 10" subwoofer
  • two pairs of speaker terminals allow for wiring flexibility when installing DVC subwoofers
  • 5/8" MDF (medium-density fiberboard) with black carpet covering
  • cutout size: 9-1/4"
  • internal volume: 0.69 cubic feet
  • dimensions: 13-1/8"W x 12-1/4"H x 12-5/8"D1 x 9-1/2"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
General
Box Type Sealed
Number of Boxes 1
Number of Speakers Per Box 1
Speaker Size 10
Cutout Diameter or Length (inches) 9 1/4
Maximum Speaker Depth (inches) 9-1/2
Box Volume (cubic feet) 0.69
Tuning Frequency N/A
Height (inches) 12-1/4
Width (inches) 13-1/8
Depth (inches) 12-5/8
Second Depth (inches) 9-1/2
Wood Thickness (inches) 5/8
Speaker Wire Connectors Spring posts
Box Color Black
Box Finish Carpet
Parts Warranty 1 Year
Labor Warranty 1 Year
Product Research
What's in the box?

  • Hatchback-style enclosure for a single 10" subwoofer
  • Sound Ordnance sticker

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Materials: The Sound Ordnance BB10-64S Bass Bunker is an unloaded, hatchback-style sealed enclosure for one 10" subwoofer. It is constructed of 5/8" MDF (medium-density fiberboard), covered in black carpet.

Internal Box Volume: The enclosure has 0.69 cubic feet of airspace.

Terminals: The BB10-64S is equipped with two pair of spring-post speaker terminals mounted in the rear panel, offering wiring flexibility when used with a dual voice coil woofer. The spring terminals will accept bare wire up to 10 gauge, pin connectors, and single banana plugs, but are spaced too far apart for dual banana plugs. Inside the enclosure the terminals have two attached 15" lengths of speaker wire for connecting the subwoofer.

Brackets: Brackets for securing the enclosure to your vehicle are recommended.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Sound Ordnance BB10-64S Reviews

Average Customer Review:

10 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Well Built

Written By DaveK, Camarillo, CA on Wednesday, August 27, 2014
Crutchfield Customer Review (What's this?)
 
Well Built, Good looking and makes my speaker sound great.
Pros:
Heavy Duty
Was this review helpful?    Yes | No
 
5 out of 5

Solid

Written By Devin, Gaithersburg, Md on Thursday, May 22, 2014
Crutchfield Customer Review (What's this?)
 
This box came packaged well and undamaged. The box is designed and constructed perfectly.
Pros:
Clear, crisp sound. No rattles. Looks great
Was this review helpful?    Yes | No
 
5 out of 5

Sub enclosure

Written By Steve, Fischer, TX on Tuesday, March 04, 2014
Crutchfield Customer Review (What's this?)
 
Well built nice quality
Was this review helpful?    Yes | No
 
4 out of 5

Good Box. Double binding posts??

Written By Cheshire, Newton, MA on Friday, January 03, 2014
Crutchfield Customer Review (What's this?)
 
The box is solid construction, good carpeting. For no clear reason there are double binding posts. It works beautifully with the Polk 10" DXi sub.
Pros:
Solidly constructed, good price
Cons:
double binding posts for a single sub?
1 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Nice Box

Written By Kevin, seattle, wa on Wednesday, November 13, 2013
Crutchfield Customer Review (What's this?)
 
This is a great well constructed box. I use it with my REsex10D4 and it sounds great.
Pros:
Small but big sound.
Cons:
None
Was this review helpful?    Yes | No
 
5 out of 5

Could ask for anything more

Written By Steve D, Liberty TWP,OH on Sunday, October 20, 2013
Crutchfield Customer Review (What's this?)
 
I bought this box in the 8" and loved it but didnt love the sub so i went back to a 10" sub and purchased this box to house it. Couldnt be more happy. Carpet looks great construction is solid and connection is easy
Pros:
evrything
Cons:
Wasnt free
Was this review helpful?    Yes | No
 
5 out of 5

Great Box

Written By Edwin G, Fl on Saturday, October 05, 2013
Crutchfield Customer Review (What's this?)
 
This box has a very good construction. The carpet is of good quality with the brands logo on the upper right corner where the speaker will face. The fabric is so well covered that you can't see the seam lines where the fabric butts up against each other. There are four terminals which accept banana plugs or bare wire from the push-type terminals. You can opt to wire it in such a way to use DVC or single voice coils. The leads of the wires have been soldered for max voltage transfer and are about 10 gauge in size. I had to modify the ends of the leads that attach to the speaker themselves since it was a small gauge wire. I simple soldered on thicker gauge wire to interface with my polk momo 2104 speaker terminals. While my speakers have push type terminals to accept bare wire, the modified method allowed higher interface with the terminal. The grain of the wood seemed to be superior than most boxes out there. I made pilot holes to drive the wood screws that hold the speaker in place and noticed this was not MDF board. Finally, I wanted to point out that the speaker is not heavy that it causes the box to topple over. It has a pretty good balanced weight after final assembly and sits still in the trunk of my car.
Was this review helpful?    Yes | No
 
5 out of 5

Decent sound solid construction

Written By Mihuelito, Big island, HI on Monday, September 16, 2013
Crutchfield Customer Review (What's this?)
 
Very solid construction & good speaker connectors/leads. I put an alpine type-s in there and it performs well. The sound quality is great & it digs pretty low for a sealed box. Good value for the price paid (scratch & dent).
Pros:
Construction & carpet quality
Cons:
None so far
Was this review helpful?    Yes | No
 
4 out of 5

Small Box

Written By Anonymous, Charlotte, NC on Tuesday, March 26, 2013
Crutchfield Customer Review (What's this?)
 
The constriction of the box is good and solid, i give two thumbs up for that. I hooked up my system, and used this box with my JL sub, it sound good but was not what i was looking for. Ordered something else.
Pros:
small size to fit any where, dual coil connection, good carpet, good wood and design.
Cons:
small box - not enough BASS
Was this review helpful?    Yes | No
 
5 out of 5

Nice quality box

Written By Tanner L., Colfax, IA on Tuesday, March 19, 2013
 
Put this box in my 05 Ext. cab Ranger, being sealed it cut down on size and fits perfect. Very well built with nice wrapping and quality wires for hook up. Using it with a Sound Ordnance M2-10 DVC sub (also recommend), sounds tight and clean with deep bass. Actually got this enclosure free with the purchase of sub through recent offer from Crutchfield (thank you by the way!), but would hands down pay full price for this box.
Pros:
Provides deep, tight bass, quality/sturdy construction, nice carpet covering with brand logo embroidered
Cons:
None
Was this review helpful?    Yes | No
 

1 question already asked

Was wondering if the 9 1/4" cutout is suitable for a JL audio 10w6v3 ( I think they ask for 9" cutout ) Also what is that thing that looks like an aluminum pole in the image??? Will that get in the way of my w6v3? [ Travis  Jan 11, 2014 ]
5 answers
  • Sorry. I took everything to an installer. He said JL Audio 10W3 fit in this box without any problems. [ Christopher   Jan 14, 2014 ]
  • Travis, This enclosure will work for any 10" sub. It is setup for either 2ohm or 4 ohm speakers. In the case of the JL Audio sub you can actually run it in 8 ohms. The image you see shows the wiring which is pre-soldered in the terminals. That is what looks like the "pole". Hope this helps. [ Derek   Jan 13, 2014 ]
  • Sorry Travis. We haven't installed it yet. We got a Polk Audio 8" for the enclosure. It looks like a good product. It was recommended by the customer advisor. [ FREDERICK W   Jan 12, 2014 ]
  • The "aluminum pole" is the internal wiring for the sub. I have a very similar sub and it fit nicely into the box. [ JEREMY   Jan 11, 2014 ]
  • I put a new JL Audio 10w6v3 in here with no issues. There are two sets of pre-wired wire terminals, which is what you are seeing. There is not an aluminum pole it just looks like that in the pic. I personally cut out the second set of wires since I did not need them for this sub. The 10w6v3 comes pre-wired in parallel for a 2-ohm load and then you can connect to just one terminal. Hope that helps. [ BRENNAN W   Jan 11, 2014 ]

Add accessories for the Sound Ordnance BB10-64S

T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
49 people say
Your Price: $0.39
Add to Cart
Dynamat SuperLite Tri-Pak Triple package — 3 sheets, 12 square feet (Model #10612)
17 people say
Your Price: $69.99
Add to Cart
Dynamat Xtreme Trunk Kit 5 sheets, 20 square feet
13 people say
Your Price: $169.99
Add to Cart
Dynamat Xtreme Wedge Pack 1 sheet, 4 square feet
7 people say
Your Price: $39.99
Add to Cart
Dynamat Dynaliner One 54" x 32" sheet (1/8" thick)
6 people say
Your Price: $69.99
Add to Cart
Dynamat 19100 License Frame Kit
15 people say
Your Price: $14.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
31 people say
Your Price: $12.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
15 people say
Your Price: $19.99
Add to Cart
Polyester Fiber Stuffing Make your subwoofer think it's in a bigger box (1-pound pack)
35 people say
Your Price: $12.99
Add to Cart
5 people say
Your Price: $7.99
Add to Cart
4 people say
Your Price: $5.99
Add to Cart
Grille Clamps (Front/top mount clamps)
15 people say
Your Price: $3.99
Add to Cart
Speaker Grilles (10" waffle style)
42 people say
Your Price: $9.99
Add to Cart
Autosound 2000 Disc One Low Frequency Test CD (Disc One)
1 person says
Your Price: $19.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the Sound Ordnance BB10-64S, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_777BB1064S/Sound-Ordnance-BB10-64S.html ).