Skip Navigation

iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Connects the Maestro RR module to select Kenwood receivers installed in SYNC-equipped vehicles

Outlet: Open Box

Item #: 794HRNSXA1

In Stock

4 Reviews | Ask Questions


Outlet Savings:-$6.00

Your price: $8.99 Earn up to 9 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

New Stock: $14.99

View all associated offers

Keep your SYNC system with a new Kenwood GPS receiver

iDatalink's Maestro ADS-HRN(SX)-ALL01 cable connects the Maestro RR module to select Kenwood receivers, allowing the Kenwood receiver to perform all the functions of the factory SYNC system in select Ford, Lincoln, Mercury, and Mazda vehicles. It works with these Kenwood models: DDX370, DNX5190, DNX6190HD, DNX6990HD, DNX7190HD, and DNX9990HD.

Here's how it works

First, you connect the Maestro module to your PC using the included USB cable, visit, and follow the instructions. Once the unit has been "flashed," it's ready to go. Next, you'll either solder or crimp the iDatalink Ford harness (ADS-HRN(SR)-FOR01) to your Kenwood receiver's wiring, just like you would with any Crutchfield wiring harness or wiring adapter. Finally, you use this Kenwood cable to finish connecting the Maestro RR module to the Kenwood receiver.

You'll enjoy the outstanding performance of your Kenwood DVD or GPS receiver, plus seamless touchscreen control over your SYNC system, including the factory Bluetooth, satellite radio (in most vehicles), steering wheel audio controls, and other great features. SYNC will still talk to you, and all your factory voice controls will work as they did before.

Retain steering wheel controls, too

The RR module also allows you to use your Ford's steering wheel audio controls with the Kenwood receiver. Using the intuitive web programming interface, each factory button can be assigned a specific radio function. Better yet, you can also assign a secondary "press and hold" radio function to each factory button, effectively doubling what can be controlled.

Installation Notes: If your Ford factory radio also houses the satellite radio tuner, you will not be able to retain SiriusXM reception once this harness is installed. Check iDatalink's flash demo to find out if you'll retain your factory satellite radio tuner, and to see which other factory features will still be available.

iDatalink Connec ADS-HRN(SX)-ALL01 Cable Reviews

Average Customer Review:

4 Reviews

iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Written by: Matt from New York on January 18, 2015

Im not happy that i was told i needed this item with my radio and didnt, this is for the older generation kenwoods not the new ones.



Crutchfield response on January 26, 2015 We're sorry to hear you didn't need the harness. You can return it within 60 days for a refund, just give us a call and we'll set it up for you.

iDatalink Connec ADS-HRN(SX)-ALL01 Cable

Written by: Anonymous from LAs Vegas NV on August 5, 2013

Crutchfield Customer Review (What's this?)

Plug and Done

Pros: Very Simple

Cons: None

Works as advertised.

Written by: Anthony from Phoenix,AZ on April 29, 2013

2011 Ford Mustang
Crutchfield Customer Review (What's this?)

Kenwood DNX9990HD would not work as well without it.



Top class

Written by: Khalid from Doha on February 8, 2013

2009 Ford Expedition
Crutchfield Customer Review (What's this?)

It's best and top class item



Hands-on research

What's in the box?

Download owner's manual

  • 10-pin to 3.5m connector/4-pin connector cable (for Maestro RR + Kenwood DNX)

Product Research


Compatibility: The iDatalink Maestro ADS-HRN(SX)-ALL01 cable connects the serial communications port and audio input jack on the Maestro RR Car Radio Replacement Interface (794ADSMRR, sold separately) to the SXi port on compatible 2012 Kenwood DNX series navigation head units or  select 2013 Kenwood DDX series multimedia head units. One end of the cable features a 4-pin connector and 3.5mm connector to connect to the Maestro RR interface module, while the other end of the cable is terminated with a 10-pin DIN connector to plug into your Kenwood DNX head unit. The ADS-HRN(SX)-ALL01 cable is compatible with the following Kenwood DNX & DDX radios (as of 3/12/2014).

  • 2012 DNX-series Navigation Receivers:
    • DNX5060EX
    • DNX5190
    • DNX6190
    • DNX6990
    • DNX7190
    • DNX9990HD
  • 2013 DDX-series DVD Receivers
    • DDX370

Note: The iDatalink Maestro ADS-HRN(SX)-ALL01 cable requires the Maestro RR Car Radio Replacement Interface (794ADSMRR, sold separately).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Customer Q&A