About the Goal Zero Boulder 30 Solar Panel Kit
A versatile solar panel package
A versatile solar panel package
The Boulder 30 Kit includes two 30-watt solar panels plus a zippered travel case to carry them in. Each panel weighs only 6-1/2 pounds, so they can be transported comfortably. But these panels are ruggedly built, with tempered glass and aluminum frames, so they're sturdy enough for installation. Just connect the panels to one of Goal Zero's chargers to capture the sun's energy and use it to power your USB, 12-volt, and AC-powered devices. The Boulder 30 Kit makes a great addition to the Yeti 1250 Kit, doubling the amount of solar collection capacity to keep the Yeti's high-capacity battery charged and ready to go.
Who is Goal Zero?
Goal Zero is a Utah-based innovator of portable solar solutions that can power a variety of USB, 12-volt, and AC devices wherever and whenever you need them. Field-proven in some of the most remote places on Earth, Goal Zero products add an eco-friendly measure of convenience, comfort and safety to any outdoor adventure.
Highlights:
- two Boulder 30 30-watt solar panels
- rugged, weather-resistant design optimal operating temp. 32-104° F
- high-efficiency monocrystalline cell technology
- can be used to power any Goal Zero recharger; wattage makes this panel kit most effective for use with the Sherpa 50, Escape 150, Yeti 150, Yeti 400 or Yeti 1250
- inputs and outputs:
- 12V port for charging 12-volt devices or a compatible Goal Zero recharger like the Yeti 1250 (6-ft. cord with 8mm plug)
- input port for chaining together up to 8 Boulder panels for more power and/or quicker charging
- padded, zippered travel case holds both panels
- travel case dimensions: 21-3/4"W x 18-1/2"H x 3-3/4"D
- weight: 6.5 lbs. per panel, 4 lbs. for travel case
- warranty: 1 year
- MFR # 91006
What's in the box:
Goal Zero Boulder 30 Solar Panel Kit owner's manual
- 2 Boulder 30 Solar panels
- Two 6' Output cords (installed)
- 1 Bolder 30 Travel Case
- Boulder 30 User guide
Customer reviews for Goal Zero Boulder 30 Solar Panel Kit
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Goal Zero Boulder 30 Solar Panel Kit
Product Research
Features
Boulder 30: Each Boulder 30 solar panel has a 6' output cord with Goal Zero's 8mm plug. There is also an 8mm Chain input so up to four panels can be linked together to provide more power. There are eight openings around the perimeter of the frame (on the back) for hanging the panel.
Travel Case: The zippered travel case holds two Bolder 30 solar panels. It is padded to protect the panels and includes a removable shoulder strap. With two panels inside the dimensions are approximately:
- Width: 21-3/4"
- Height: 18-1/2"
- Depth: 3-3/4"
Boulder 30 Specifications:
- Rated Wattage: 30 watts
- Solar Cell Type: mono-crystalline
- Open Circuit Voltage: 18-20 volts DC
- Efficiency: 17-18%
- Cell Area: approximately 1,935 cm² per panel (3,870 cm² total)
- Weight:
- Boulder 30 Panel: 6.5 lbs each
- Travel Case: 4 lbs
- Optimal Operating Temperature Range: 32°-104° F
- Output: 14-16 volts/2 amps max (30 watts max, not regulated); 8mm plug
- Input: 8mm port for chaining multiple panels together
- Approximate Charging Time: varies with
weather conditions (quoted using one panel)
- Sherpa 50: 4-8 hours
- Yeti 150: 11-22 hours
- Yeti 1250: 20-24 hours (using two panels)
- Typical Smart Phone/GPS: 2-4 hours
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...