Looking to enjoy great music outside of your R/V? Concertone's M1 speaker comes with a 6" coaxial speaker rated for 35 watts built into a rugged enclosure. The water-resistant polypropylene woofer and tweeter eliminate any worries about getting your speaker wet. Exposure to constant sunlight isn't an issue either, thanks to special UV plastic used to make the angled housing. Just mount a pair of M1 speakers on your RV's exterior, wire it up to an amp, and get ready to party in the great outdoors. Priced per speaker.

Product Highlights:

  • single 6" speaker in plastic housing
  • poly woofer with cloth surround
  • PEI tweeter
  • frequency response 75-20,000 Hz
  • recommended power 35 watts RMS
  • 50 watts peak power handling
  • sensitivity 86 dB
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • One FR-M1 speaker

Product Research

Features

Overview: The Concertone M1 is a weather-resistant coaxial speaker designed to mount on the outside of your RV. The impedance and power handling are matched to the amps in Concertone's receivers. Water resistant polymers are used in both the woofer and tweeter, and the housing is made of UV rated plastic to prevent it from distorting. When mounted the speaker is angled down to keep rain water away from the drivers.

Mounting: Most of the speaker is housed in the M1's surface structure, minimizing the mounting depth needed. Only the magnet and terminals extend below the surface. Four screws are used to mount the M1 (not included).

Dimensions:

  • Width: 8"
  • Length: 8-3/16"
  • Mounting Height: 3-3/16"
  • Cutout Diameter: 4-3/16"
  • Mounting Depth: 1-1/4"

Specifications:

  • Frequency Response: 75 Hz to 20 kHz
  • Recommended Power: 35 watts RMS (50 watts max)
  • Impedance:
  • Sensitivity: 86 dB

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Concertone M1 Reviews

Average Customer Review:

2 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Concertone M1

Written By Lotzoftime2, Rocklin, CA on Thursday, March 20, 2014

Crutchfield Customer Review (What's this?)

Easy to install, good quality, fast delivery and excellent customer service... GREAT price. A VERY easy transaction and the speakers arrived right on time despite an e-mail saying they may be delayed due to bad weather on the east coast... Thanks, Crutchfield! I will DEFINITELY look here first for my audio needs!

Pros: Good quality Easy to install Sound great

Cons: No instructions included, but easy to install if you're even remotely mechanically inclined...

Excellent Product

Written By t grytza, Huntley, IL on Monday, June 24, 2013

Crutchfield Customer Review (What's this?)

This seems to be a great product for the money. The fit and finish of these speakers is very nice and seem to be a bargain at $29.99/ea. msrp. I am very happy with these.

Pros: Sound very good, look very good, priced right.

Cons: None.

Get everything you’ll need to enjoy your new Concertone M1

You'll need speaker wire to connect your speakers to your amp.
The right tools will help keep your installation simple and clean.
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(51)

Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
Spec Tools Stubby Driver

Spec Tools Stubby Driver

Ratcheting driver for tight installations

Item #: 180PGS5100

(2)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
Posi-Products™ Car Stereo Connectors

Posi-Products™ Car Stereo Connectors

16 connectors for installing a new car stereo

Item #: 669PP500

(696)

DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(7)

$24.99
Add to Cart

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

There needs to be an extra hole for the magnet that protrudes. The profile picture shows the part that sticks out. [ TERRENCE  May 27, 2014 ]
need to cut about a 3 in hole [ LARRY  May 20, 2014 ]
Chris, You'll need to cut a hole for the magnet. I mounted 6 on my houseboat and in 4 locations I didn't want to cut holes in my helm or flybridge so I bought a 6inx2inx8ft board, cut the board slightly larger than my speakers, left it square shape, then cut a hole large enough for the magnet. Mounted the speaker to the stained board and then mounted the board to my helm and flybridge. These speakers are great. I'm not into the large bass, but volume and clarity they do have. Hope this helps. Jim [ JAMES  May 20, 2014 ]
4 inch hole with hole saw, they only need about 2 inches of depth though. Hope that helps. [ WILLIAM  May 20, 2014 ]
Can't remember if speaker magnet stuck out the back or not. I already had holes because I was replacing speakers on the outside of my camper that went bad. Yes you will need four holes and I used string calk for sealant. So far I am very happy with them. [ KEVIN  May 19, 2014 ]
Need to cut a 3 in hole for back of speaker [ LARRY  May 19, 2014 ]
Approx 4" hole [ Richard  May 19, 2014 ]
The center hole is about 4 inches I believe and the for scree holes fall outside this center hole. I used self taking screws to secure the speakers. [ JOSHUA  May 19, 2014 ]