Overview: The Music Hall MMF-2.2 is a two speed belt driven audiophile
turntable that delivers superior audio performance. The construction of the
MMF-2.2 has been simplified to focus on the critical music making components;
the main bearing, motor, and arm. It is constructed using high quality
components and comes complete with the cartridge mounted.
Note: The Music Hall MMF-2.2 turntable is available in
high gloss piano black, red, or white finish.
MDF Plinth w/ Damping Feet: The medium density fiber (MDF)
plinth stands on three special, resonance damping feet for exceptional stability.
Note: The turntable should be positioned on a
low-resonance surface such as wood or multiple layer ply-board to avoid
structural vibrations disturbing replay.
Alloy Platter with Felt Mat: The Music Hall MMF-2.2 turntable features
an alloy platter and comes with a felt mat.
Stainless Steel/Bronze Bearing Assembly: The alloy platter runs on a
precision, stainless steel and bronze bearing assembly to provide fluid and
Belt-Driven: The Music Hall turntable employs a low noise fully manual belt drive design
that supports two speeds (33/45 rpm). A 45 rpm adapter is included.
1-Piece Alloy Tone-Arm: The Music Hall MMF-2.2 turntable features a
one piece alloy tone-arm for superb tracking ability.
MM Phono Cartridge: The Music Hall Tracker moving magnet (MM) phono cartridge is
pre-mounted and properly aligned. The turntable's elliptical stylus is user
Note: If your amplifier does not have a suitable Phono
MM input, a separate
phono pre-amplifier (sold separately) is required to connect the
turntable to your amplifier.
Fixed Audio Cable: The Music Hall Turntable is fitted with an attached
41" stereo audio cable with high-quality gold RCA connectors. Connect the
turntable to the Phono input of your home receiver.
Dust Cover: The Music Hall MMF-2.2 comes supplied with a
dust cover to prevent dust build-up on the turntable.
Isolated Motor: The motor is isolated from the plinth to
reduce vibration transmission.
AC Power Adapter: The turntable operates off of standard household
current using the supplied external AC power adapter.
- Input: 120V~60Hz, 13.0W
- Output: 15V, 550mA
- Power Absorption: 2VA
- Speeds: 33/45 rpm
- Speed Deviation: +/- 0.9%
- Wow & Flutter: +/-0.15%
- Rumble Max: -70 dB
- Tracking Force: 10-30 mN
- Effective Tone-Arm:
- Length: 9" (22.9cm)
- Overhang: 0.67" (17mm)
- Platter Diameter: 11.81" (30cm)
- Dust Cover Closed: 16.375" (w) x 4.9375" (h) x 13.125" (d)
- Dust Cover Open: 16.375" (w) x 14.375" (h) x 15.75" (d)
- Weight: 17 lbs (7.8 kg)
- Frequency Response: 20-20kHz (+/-3db)
- Channel Balance: 2dB @ 1kHz
- Channel Separation: 20dB @ 1kHz
- Sensitivity: 5mV (+/-2dB), 1kHz @ 5cm/sec
- Static Compliance: 16mm/N
- Equivalent Tip Mass: 0.7 mg
- Vertical Tracking Angle: 26 degrees
- Stylus Radius: Elliptical .0007" x .0003"
- Stylus Type: Replaceable
- Load Resistance: 47,000 Ohm
- Load Capacitance: 150-400 pF
- Internal Inductance: 560 mH
- Internal Resistance: 700 Ohm
- Cartridge Weight: 4.2g
- Fixing Center: 0.5" (12.7mm)
- Playing Weight: 1.5-2.0g (1.75g nom.)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.