Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The ClearView D-52 is a day/night zoom dome camera designed
for indoor use in a closed circuit system, such as the ClearView Hawk, Eagle, or LCD Combo systems. This high-resolution camera (700 lines color, 750 B/W) features a 1/3" Sony Super HAD CCD II imaging device with
480K pixels (976 H x 484 V). The camera is equipped with the Effio-P processor,
and a 2.8mm-12mm Varifocal
lens. It operates on 12VDC, and has a 75-ohm composite video output with a BNC
Minimum Illumination: The D-52 can give you a clear, bright
picture in extremely low light. The minimum illumination for color is 0.001 Lux
@ F1.2 / 0.0001 Lux @ F1.2 (Slow shutter mode, 512x). For B/W, the minimum
illumination is 0.0001 Lux @ F1.2 / 0.00001 Lux @ F1.2 (Slow shutter mode,
Privacy Masking: If there are areas in the camera's view
that you do not wish to show, you can use privacy masking to obscure those
areas. Up to 4 areas can be selected for privacy masking.
On-Screen Display: The D-52 features an on-screen display (OSD)
to indicate a camera number or to define the room where the camera is located.
The OSD is available in English and Chinese.
Wide Dynamic Range: The camera has a wide dynamic range of
75dB to give you a clear picture when there is strong light, shadow, or
backlight in the camera's view.
OSD Keyboard: Included with the camera is a small circuit
board which connects to the camera via a 6-pin ribbon cable. The circuit board
has a 5-button "keyboard" with buttons for left, right, up, down, and confirm.
These buttons allow you to operate the on-screen display and make adjustments to
various camera settings.
Camera Adjustments: Once you have connected the camera into
your system with a DVR or NVR, you can make adjustments to the camera or
picture. The following adjustments can be made:
- Lens: Auto Iris, Manual
- Shutter/AGC: Auto, Manual
- Picture Adjust: Mirror, Contrast, Sharpness, Hue, AGC,
- White Balance: Manual, Anti Color Roll, Push Lock,
Push, User 1, User 2, ATW (auto trace)
- WDR: Mode, Contrast
- Noise Reduction: Level
- Day/Night: Auto, Color, B/W
- DZoom: Magnitude, Pan, Tilt
- Privacy Mask: Area, Mode, Position, Color,
- Motion Detection: On, Off
Installation: The D-52 is designed to be mounted on a wall or
ceiling. The exterior dome can be easily removed to expose the mounting screw
holes. A self-adhesive template is included to indicate the position of the four
mounting screws (included). The power and video cables can be routed through the
ceiling by drilling an additional hole, or routed to the side of the camera by
knocking out small panel in the base. Once the installation is complete, the
exterior dome can be simply screwed back into place.