Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The BlackRapid SnapR 10 is a compact camera bag
with a unique sling and strap system, designed for smaller point-and-shoot
cameras. You can use the bag, wrist strap, and sling strap together or
Camera Bag: The SnapR 10 bag is made of high quality
ballistic nylon with a soft polyurethane foam padded interior. The sling strap
clips into the top rear of the bag with two buckles. It also has a wide loop on
the back so it can be worn on a belt without the strap. The SnapR 10 will fit
cameras that are approximately 5" x 3" x 1".
Camera Tether: The SnapR 10 comes with a camera tether that
attaches to the camera via a metal fastener that screws into the tripod socket.
The tether has a buckle that will fit onto either the sling strap or the wrist
strap, depending upon how you choose to carry the camera.
Sling Strap: The adjustable sling strap (58" maximum length)
has a buckle that slides loosely on the strap. Once you have attached the sling
strap to the camera tether, you can raise the camera to the shooting position,
sliding it along the sling strap. When you are finished shooting, the camera
will slide down the strap to be stored upside down in the bag or hanging down at
your side until you're ready to resume shooting.
Wrist Strap: The SnapR 10 comes with an adjustable wrist
strap that allows you to carry the camera securely. The camera's tether snaps
onto the wrist strap in the same way it attaches to the sling strap. When not in
use, you can easily slip the camera into the bag, or clip it back onto the sling