Skip Navigation

Yamaha P2500S

P-Series power amplifier — 250 watts RMS x 2 at 8 ohms (310W x 2 at 4 ohms)

Item #: 845P2500S

In Stock

Be the first to write a review

Your price: $419.99 Earn up to 420 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

Scratch & Dent: $356.99

View all associated offers

Efficient powerhouse

When you're up on stage, you don't want to worry about having enough power for your speakers and monitors. With the robust power from Yamaha's P-Series amplifiers, you won't have to worry. They work effectively in a wide variety of venues, such as dance clubs, music halls, convention centers, and houses of worship. Their strong power output, versatile channel configurations, and portability make them a great choice for any event.

A blend of features and performance

Yamaha P2500S amplifier

The rear panel inputs and outputs accommodate a wide variety of pro audio gear.

Yamaha's P2500S amp delivers 250 watts RMS per channel at 8 ohms, 310 watts per channel at 4 ohms, and up to 1300 watts bridged at 4 ohms. EEEngine (Energy Efficient Engine) technology effectively reduces AC power consumption and heat generation without sacrificing power output. Combine that with its variable-speed cooling fan, and you get an amp that runs cool, only drawing big-time current when it needs it. The gain controls and variable high-pass and low-pass filters let you pair these amps with just about any non-powered speakers. Yamaha's YS processing balances the power output to perfectly match the power handling of Yamaha's Club Series speakers.

Yamaha's P2500S amp includes balanced XLR and 1/4" TRS inputs, as well as 5-way binding posts, 1/4" outputs, and Neutrik Speakon® outputs for the speakers. Rack mounts are included, so you can install multiple amps in one rack to power your multi-speaker setup.

Product Highlights:

    General information:
    • 2-channel Pro Audio amplifier
    • power output at 20-20,000 Hz:
      • 250 watts RMS per channel at 8 ohms
      • 310 watts RMS per channel at 4 ohms
      • 620 watts RMS (mono) at 8 ohms in bridged mode
    • power output at 1 kHz:
      • 275 watts RMS per channel at 8 ohms
      • 390 watts RMS per channel at 4 ohms
      • 780 watts RMS (mono) at 8 ohms in bridged mode
      • 1300 watts RMS (mono) at 4 ohms in bridged mode
    • frequency response: 20-50,000 Hz (-1.5 dB)
    • signal-to-noise ratio: 100 dB
    • inputs: XLR and 1/4" TRS for channels A and B
    • outputs: Neutrik Speakon jacks, 5-way binding posts, 1/4" jacks
    • independent right- and left-channel level controls for precise volume matching
    • variable high- and low-pass crossovers for each channel (25-150 Hz)
    • variable speed fan for heat dissipation
    • DC, short circuit, and overload protection with automatic reset
    • front-panel LEDs indicate Power, Active Status, and Protection Warning for easier troubleshooting
    • rack mount ears included
    Other information:

    Yamaha P2500S Reviews

    Hands-on research

    What's in the box?

    Download owner's manual

    • Power amp
    • Security cover (w/ hex wrench)
    • Owner's Manual

    Features and Specs

    Number of Channels 2
    Power Class AB
    Watts per channel 8 ohms 250
    Watts per channel 4 ohms 310
    Watts per channel 2 ohms 650
    Watts bridged 620
    Fan cooled Y
    DSP Y
    Filters HP/LP
    Rack spaces 2
    Height (inches) 3-7/16
    Depth (inches) 17-15/16
    Width (inches) 18-7/8
    Weight 30.9 lbs
    RCA ---
    1/4" 2
    XLR 2
    1/4" 2
    Binding post 4
    Spring post ---

    Product Research


    P-Series Power Amplifier: The Yamaha P-Series P2500S power amplifier delivers solid, professional-quality power in a wide range of configurations designed to suit a variety of applications. The unit offers three operating modes - Stereo (250W x 2ch in 8Ω or 310W x 2ch in 4Ω), Parallel (250W x 2ch in 8Ω or 310W x 2ch in 4Ω), and Bridge (620W x 1ch in 8Ω).

    • Stereo: In Stereo mode, Channels A and B operate independently (as with a conventional stereo amplifier). The Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks.
    • Parallel: In Parallel mode, the unit outputs a mono source through twin amplifier systems. The Channel A input signal is output through both the Channel
      A and Channel B output jacks. The Channel B input jacks do not function. Channel A and B volumes can be independently adjusted.
    • Bridge: In Bridge mode, the unit operates as a single high-power amp. The Channel A input signal is output from the Bridge output jacks. To adjust the volume, you must use the Channel A volume control knob.
    Note: The amplifiers two output channels have independent volume controls (31-step) located on the front-panel.

    Inputs/Outputs: To provide the most versatile connectivity possible, The P2500S is equipped with Neutrik Speakon output jacks and 1/4" output jacks for each channel, in addition to 5-way binding posts. Balanced XLR and 1/4" TRS phone jacks are provided for channel inputs A-B.

    High-Pass & Low-Pass Filters: The Yamaha P2500S is equipped with independent high-pass and low-pass filters on each channel, so you can optimize the output for a subwoofer or full range system. The high-pass and low-pass filters are variable (25-150Hz).

    Perfect Match for Yamaha Club Series Speakers: Yamaha's audio engineers have specifically designed the new P-S Series power amplifiers to be perfect companions to the popular Club Series loudspeakers. To achieve this, they made sure that the amplifiers are capable of delivering power that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that will result in optimum system performance. The P-Series power amplifier can also be used with practically any loudspeaker PA system.

    EEEngine (Energy Efficient Engine) Technology: EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing power consumption and heat generation without sacrificing output power or sound quality. When power requirements are low, the system uses a highly efficient current buffer to transparently switch input power on and off as needed. As power requirements increase, an independently responding auxiliary power line supplies additional power as required. Output isn't compromised because the auxiliary power line is driven by the power supply voltage which maintains maximum output to the speaker load.

    Protection Circuitry + Cooling Fan: Comprehensive protection includes power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators. The Protection indicator lights up and sound output is automatically muted whenever the unit's protective circuitry is operating. The amplifier also features a variable cooling fan for quiet, efficient cooling. The Temp indicator lights up if the unit is running hot.

    Rack Mountable: The Yamaha P2500S power amp is rack mountable with a 2U chassis size.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Looking for more? Check out the next model in this lineup.

    Yamaha P3500S

    P-Series power amplifier

    The Yamaha P3500S offers these features:

    350 watts RMS x 2 at 8 ohms (450W x 2 at 4 ohms)