1.888.955.6000
crutchfield.com
Crutchfield

Yamaha P7000S

P-Series power amplifier — 700 watts RMS x 2 at 8 ohms (950W x 2 at 4 ohms)

Zoom
  • Yamaha P7000S

    The front panel includes gain controls for each channel, protection indicators, and the power switch

  • Yamaha P7000S

    Close-up of the input/output section of the rear panel

  • Yamaha P7000S

    View of the rear panel

 

Our take on the Yamaha P7000S

by Dave Delamere
Yamaha Pro

Efficient powerhouse

When you're up on stage, you don't want to worry about having enough power for your speakers and monitors. With the robust power from Yamaha's P-Series amplifiers, you won't have to worry. They work effectively in a wide variety of venues, such as dance clubs, music halls, convention centers, and houses of worship. Their strong power output, versatile channel configurations, and portability make them a great choice for any event.

A blend of features and performance

Yamaha's P7000S amp delivers 700 watts RMS per channel at 8 ohms, 950 watts per channel at 4 ohms, and up to 3200 watts bridged at 4 ohms. EEEngine (Energy Efficient Engine) technology effectively reduces AC power consumption and heat generation without sacrificing power output. Combine that with its dual variable-speed cooling fans, and you get an amp that runs cool, only drawing big-time current when it needs it. The gain controls and variable high-pass and low-pass filters let you pair these amps with just about any passive speakers. Yamaha's YS processing balances the power output to perfectly match the power handling of Yamaha's Club Series speakers.

Read more

Yamaha P7000S amp

The rear panel inputs and outputs accommodate a wide variety of pro audio gear.

Yamaha's P7000S amp includes balanced XLR and 1/4" TRS inputs, as well as 5-way binding posts, 1/4" outputs, and Neutrik Speakon® outputs for the speakers. Rack mounts are included, so you can install multiple amps in one rack to power your multi-speaker setup.

Highlights:

    General information:
    • 2-channel Pro Audio amplifier
    • power output at 20-20,000 Hz:
      • 700 watts RMS per channel at 8 ohms
      • 950 watts RMS per channel at 4 ohms
      • 1900 watts RMS (mono) at 8 ohms in bridged mode
    • power output at 1 kHz:
      • 750 watts RMS per channel at 8 ohms
      • 1100 watts RMS per channel at 4 ohms
      • 2200 watts RMS (mono) at 8 ohms in bridged mode
      • 3200 watts RMS (mono) at 4 ohms in bridged mode
    • frequency response: 20-50,000 Hz (-1.5 dB)
    • signal-to-noise ratio: 104 dB
    Features:
    • inputs: XLR and 1/4" TRS for channels A and B
    • outputs: Neutrik Speakon jacks, 5-way binding posts, 1/4" jacks
    • independent right- and left-channel level controls for precise volume matching
    • variable high- and low-pass crossovers for each channel (25-150 Hz)
    • dual variable-speed fans for heat dissipation
    • DC, short circuit, and overload protection with automatic reset
    • power-matched to Yamaha's Club-series speakers
    • front-panel LEDs indicate Power, Active Status, and Protection Warning for easier troubleshooting
    • rack mount ears included
    Other information:
    Preliminary info from the manufacturer
    Features and Specs
    General
    Number of Channels 2
    Power Class AB
    Watts per channel 8 ohms 700
    Watts per channel 4 ohms 950
    Watts per channel 2 ohms 1600
    Watts bridged 1900
    Fan cooled Y
    DSP Y
    Filters HP/LP
    Rack spaces 2
    Height (inches) 3-7/16
    Depth (inches) 17-15/16
    Width (inches) 18-7/8
    Weight 26.5 lbs
    Inputs
    RCA ---
    1/4" 2
    XLR 2
    Outputs
    1/4" 2
    Binding post 4
    Spring post ---
    Product Research

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Features

    P-Series Power Amplifier: The Yamaha P-Series P7000S power amplifier delivers solid, professional-quality power in a wide range of configurations designed to suit a variety of applications. The unit offers three operating modes - Stereo (700W x 2ch in 8Ω or 950W x 2ch in 4Ω), Parallel (700W x 2ch in 8Ω or 950W x 2ch in 4Ω), and Bridge (1900W x 1ch in 8Ω).

    • Stereo: In Stereo mode, Channels A and B operate independently (as with a conventional stereo amplifier). The Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks.
    • Parallel: In Parallel mode, the unit outputs a mono source through twin amplifier systems. The Channel A input signal is output through both the Channel
      A and Channel B output jacks. The Channel B input jacks do not function. Channel A and B volumes can be independently adjusted.
    • Bridge: In Bridge mode, the unit operates as a single high-power amp. The Channel A input signal is output from the Bridge output jacks. To adjust the volume, you must use the Channel A volume control knob.
    Note: The amplifiers two output channels have independent volume controls (31-step) located on the front-panel.

    Inputs/Outputs: To provide the most versatile connectivity possible, The P7000S is equipped with Neutrik Speakon output jacks and 1/4" output jacks for each channel, in addition to 5-way binding posts. Balanced XLR and 1/4" TRS phone jacks are provided for channel inputs A-B.

    High-Pass & Low-Pass Filters: The Yamaha P7000S is equipped with independent high-pass and low-pass filters on each channel, so you can optimize the output for a subwoofer or full range system. The high-pass and low-pass filters are variable (25-150Hz).

    Perfect Match for Yamaha Club Series Speakers: Yamaha's audio engineers have specifically designed the new P-S Series power amplifiers to be perfect companions to the popular Club Series loudspeakers. To achieve this, they made sure that the amplifiers are capable of delivering power that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that will result in optimum system performance. The P-Series power amplifier can also be used with practically any loudspeaker PA system.

    EEEngine (Energy Efficient Engine) Technology: EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing power consumption and heat generation without sacrificing output power or sound quality. When power requirements are low, the system uses a highly efficient current buffer to transparently switch input power on and off as needed. As power requirements increase, an independently responding auxiliary power line supplies additional power as required. Output isn't compromised because the auxiliary power line is driven by the power supply voltage which maintains maximum output to the speaker load.

    Protection Circuitry + Cooling Fan: Comprehensive protection includes power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators. The Protection indicator lights up and sound output is automatically muted whenever the unit's protective circuitry is operating. The amplifier also features variable cooling fans for quiet, efficient cooling. The Temp indicator lights up if the unit is running hot.

    Rack Mountable: The Yamaha P7000S power amp is rack mountable with a 2U chassis size.

     
    Be the first to review this product
    Great Gear Giveaway rewards card

    Submit a review and then enter to win a $500 rewards card

    Review this product:

    Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

    Your email won't be visible. Please use the email address that is associated with your order.
    (e.g., JohnD) Your review will be signed using the display name and location
    (e.g., Charlottesville, VA)

    Click on a star to rate the overall product on a scale of 1-5
    1500 characters left
    Attach a YouTube Review
    Crutchfield Video Review Guidelines
    • Only submit videos that you made or are authorized to use.
    • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
    • Please see our Review Guidelines for more information.
    500 characters left
    500 characters left

    Add accessories for the Yamaha P7000S

    RapcoHorizon H-Series Speaker cable 16-gauge cable with 1/4" connectors (50 feet)
    Your Price: $34.99
    Add to Cart
    RapcoHorizon H Series Speaker Cable 14-gauge wire with NL4 connectors (50 feet)
    Your Price: $54.99
    Add to Cart
    RapcoHorizon H Series Speaker Cable 14-gauge, 1/4" connectors (50 feet)
    Your Price: $42.99
    Add to Cart
    RapcoHorizon H Series Speaker Cable 12-gauge, 1/4" connectors (100 feet)
    Your Price: $159.99
    Add to Cart
    RapcoHorizon M1 Series Microphone cable with Neutrik® XLR connectors (6 feet)
    Your Price: $15.99
    Add to Cart
    RapcoHorizon M1 Series Microphone cable with XLR connectors (6 feet)
    Your Price: $13.99
    Add to Cart
    RapcoHorizon Roadhog Microphone cable with XLR connectors (6 feet)
    Your Price: $17.99
    Add to Cart
    RapcoHorizon Gold Pro Microphone cable with XLR connectors (20 feet)
    1 person says
    Your Price: $36.99
    Add to Cart
    Whirlwind Connect "MIC" Series Microphone cable with XLR connectors (50 ft.)
    Your Price: $26.99
    Add to Cart
    Furman SPR20i Power conditioner, surge protector and voltage regulator
    2 people say
    Your Price: $1,699.00
    Add to Cart
    Furman SS-6B Pro Surge protector
    Your Price: $50.99
    Add to Cart
    Furman PlugLock-PFP Circuit-breaker-protected locking outlet strip
    Your Price: $60.99
    Add to Cart
    Furman PL-PRO C 20-amp power line conditioner and surge protector with voltmeter
    Your Price: $374.99
    Add to Cart
    Furman PL-Plus C Power line conditioner and surge protector with voltmeter
    Your Price: $229.99
    Add to Cart
    Furman PL-8 C Power line conditioner and surge protector with lights
    1 person says
    Your Price: $189.99
    Add to Cart
    Furman P-8 Pro Series II 20-amp power line conditioner and surge protector
    Your Price: $269.99
    Add to Cart
    Furman M-8x2 Power line conditioner and surge protector
    Your Price: $90.99
    Add to Cart
    Furman M-8Lx Power line conditioner and surge protector with lights
    Your Price: $130.99
    Add to Cart
    Furman M-8Dx Power line conditioner and surge protector with digital voltmeter
    Your Price: $180.99
    Add to Cart
    Furman D10-PFP Power distributor
    Your Price: $60.99
    Add to Cart
    Furman AR-1215 Power line conditioner, voltage regulator, and surge protector
    Your Price: $549.99
    Add to Cart
    Furman AC-215A Compact line conditioner and surge protector
    1 person says
    Your Price: $199.99
    Add to Cart

    Why choose SquareTrade?

    The #1-Rated Protection Plan

    Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

    5-Day Service Guarantee & Free Shipping

    We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

    Protection from Normal, Everyday Use

    Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

    For a more in-depth review and enhanced detailed information on the Yamaha P7000S, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_845P7000S/Yamaha-P7000S.html ).

    Searches related to the Yamaha P7000S P-Series power amplifier — 700 watts RMS x 2 at 8 ohms (950W x 2 at 4 ohms)