Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Powered Studio Monitor Sub: The Presonus Temblor T10 lets you take
charge of the low-frequency foundation of your mix with a combination of quality
components and design, plenty of inputs and outputs, and extensive user controls
Powerful and musical, Temblor features high-quality components and design that
enable it to deliver fast, accurate transient response and extended low
Note: An ideal companion to the Presonus Eris and Sceptre active reference monitors
the T10 complements full-range monitors without overshadowing them, extending
the reach of your full-range system's low end with a musical and natural
10" Woofer: The Temblor T10 is an active subwoofer with a 10"
glass-composite driver, high-temperature voice coil, and damped rubber surround.
This woofer design offers outstanding accuracy and a frequency response that
ranges from 20Hz to 130Hz.
250W Class AB Amp: The 10" woofer is powered by a built-in 250 watt
Class AB amplifier for dynamic, rich, deep, and real bass.
Bass Reflex Enclosure: Its cabinet features a front-firing,
bass-reflex acoustic port and optimized, resonance-suppressing internal bracing.
The ported enclosure helps enable the subwoofer to produce higher volume (up to
113 dB SPL) with less power than a sealed-box design.
Controls: The T10 provides a variety of user controls, enabling
seamless integration into your listening environment. The Temblor T10's
extensive user controls include input gain (-30dB to +6dB, continuously
variable) and a continuously variable low-pass filter (50Hz to 130Hz) that let
you create a seamless crossover transition between your full-range studio
monitors and subwoofer for a more accurate listening environment. A switchable
high-pass filter removes frequency content below 80Hz from the full-range signal
sent from the T10 outputs to the main monitors, avoiding destructive
cancellation and reinforcement in the T10's upper range. There is also a
Polarity switch which reverses the polarity of the summed input signal. Enabling
the ground lift switch can help to reduce ground loop noise in your audio
Note: The T10 also features a momentary footswitch (included) that
bypasses the subwoofer, high-pass filter, and Sub Out. This allows your audio
source signal to pass directly through the Temblor T10 to the full-range studio
monitors, making comparing your mix with or without sub frequencies quick and
easy. This helps to ensure your mix will sound good on a wide variety of systems.
Connections: The Presonus Temblor T10 is fitted with a selection of
inputs and outputs for flexibility when connecting your system.
- Inputs: The Temblor T10 provides a choice of three input pairs;
two sets of balanced inputs (XLR and 1/4" TRS) and one pair of RCA
unbalanced inputs. Pairs of inputs are provided in order to accept a stereo
signal from your audio source. When both of the balanced connections are in
use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs
will sum into either balanced connection.
- Outputs: You get two pairs of balanced outputs; XLR and 1/4" TRS.
The full-range signal connected to the stereo inputs on the T10 is passed
through to these outputs so you can connect them to your main left and right
studio monitors. If the High Pass Filter switch is engaged, frequencies
below 80Hz are not sent from these outputs. The T10 also has a balanced XLR
output that sends the low-frequency signal from the low-pass filter to a
second Temblor T10 for the ultimate in smooth low end.
Placement: The enclosure has integrated rubber feet for stable