Chat
Contact us
Close contact box
Connect ID #
682 483 387 4
Connect ID #
682 483 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Speakercraft AIM 7 Two Series 2 In-ceiling speaker

Item # 866AIM272

You'll notice that the Speakercraft AIM 7 Two Series 2 (AIM272 for short) looks different from other speakers when...

You'll notice that the Speakercraft AIM 7 Two Series 2 (AIM272 for short) looks different from other speakers when...

Item # 866AIM272

Shop all Speakercraft In-ceiling Speakers

About the Speakercraft AIM 7 Two Series 2

Eric A.

A sophisticated in-ceiling speaker

You'll notice that the Speakercraft AIM 7 Two Series 2 (AIM272 for short) looks different from other speakers when you remove the grille. It sounds different, too. Its sophisticated technology means you'll enjoy high-performance sound in just about any listening environment. Low-density compounds are used in the enclosure to minimize unwanted resonance. Carefully chosen internal components reduce distortion and air turbulence. Small stuff? Sure. But small stuff matters when you expect superb sound.
The AIM272 features a tilting 7" woofer and four aimable silk tweeters.

The AIM272 features a tilting 7" woofer and four aimable silk tweeters.

A sophisticated in-ceiling speaker

You'll notice that the Speakercraft AIM 7 Two Series 2 (AIM272 for short) looks different from other speakers when you remove the grille. It sounds different, too. Its sophisticated technology means you'll enjoy high-performance sound in just about any listening environment. Low-density compounds are used in the enclosure to minimize unwanted resonance. Carefully chosen internal components reduce distortion and air turbulence. Small stuff? Sure. But small stuff matters when you expect superb sound.

Aim sound where you need it most

It's called the AIM272 for a reason — this speaker lets you aim sound where you need it. The 7" woofer tilts up to 15 degrees each way, and each of the four 5/8" tweeters built into the ARC Tweeter Array can rotate and tilt. That means you can mount the speaker where it looks best, or where the architecture of your room dicatates it must be, and then direct the sound waves toward your favorite chair. WavePlane™ technology helps further focus high-frequency sound dispersion, providing maximum clarity for music and home theater sound.

Got wire?

Most speakers don't include any. Read more about in-wall wiring.
Shop our selection of in-wall speaker wire.

READ LESS

Product highlights:

  • 7" glass fiber cone woofer
    • 15° pivoting ability
  • ARC tweeter array incorporates four 5/8" silk dome tweeters
    • each tweeter features 15° pivoting & 359° rotational ability
  • acoustic isolation technology minimizes transfer of acoustic energy to mounting and surrounding surfaces
  • front-mounted switch allows ±3dB of treble adjustment
  • timbre-matched to other Two series speakers
  • handles 125 watts RMS
  • frequency response: 40-20,000 Hz
  • sensitivity: 88 dB
  • impedance: 8 ohms
  • grille is paintable to match your decor
  • 9-5/8" diameter x 5-1/2" deep
  • cutout diameter: 8-1/4"
  • warranty: lifetime
  • MFR # AIM272

What's in the box:

  • In-ceiling speaker
  • Grille
  • Installation Guide
  • Cardboard template

Customer reviews for Speakercraft AIM 7 Two Series 2

We don't have any reviews, yet.
Submit a review and then enter to win a $350 gift card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Speakercraft AIM 7 Two Series 2

Stacey B.

Features & specs

Features
Quantity in Package Single
Tweeter Dome
Aimable Tweeter No
Woofer Composition Glass Fiber
Woofer Surround Butyl Elastomer
Connector Type Spring post
Bi-Amp Inputs No
Built-in Back-box No
Moisture Resistance
Indoor (Moisture-resistant) No
Outdoor (Partial Exposure) No
Outdoor (Full Exposure) No
Specs
Tweeter Size .625
Midrange Size N/A
Speaker Shape 8.4375
Woofer Size 7
Cutout Width ---
Cutout Height ---
Mounting Depth 5.5
Power Range (Watts) 125
Sensitivity 88 dB
Impedance (Ohms) 8
Frequency Response 40-20kHz
Parts Warranty Limited Lifetime
Labor Warranty Limited Lifetime

Product Research

Features

ARC Tweeter Array: By incorporating four 0.625" silk dome tweeters in a line array, the AIM Series 2 in-ceiling speaker delivers focused high frequencies farther into the listening area than standard tweeter configurations. The ARC Tweeter Array lowers the crossover point to increase the sound pressure level at the critical mid-range frequencies so that acoustically, listeners enjoy a much larger sweet spot.

WavePlane Technology: Complementing the ARC Tweeter Array is SpeakerCraft's updated WavePlane technology that acts as an acoustic lens, focusing the high frequency audio energy into the listening environment for a cleaner, wider, and richer sound. Ordinary speakers only sound their best when you are directly underneath them, but the WavePlane assures optimal high frequency dispersion throughout the listening area.

7" Woofer: The SpeakerCraft in-ceiling speaker houses a 7" glass-fiber cone woofer with a butyl elastomer surround for midrange and midbass frequencies.

Aim-Ability: The enhanced aim-ability of the AIM Series 2 in-ceiling speaker provides flexibility for installation in home theater and whole home audio applications, so you can aim the sound exactly where you want it. The speaker housing design allows for a +/-15° pivoting woofer, totaling 30° of adjustment. Once the woofer is positioned, you can pivot and rotate the ARC Tweeter Array and WavePlane to further adjust the direction of the sound into the room toward the listening area. The ARC Tweeter Array and WavePlane rotate as one unit up to 359°. You may also further pivot the ARC Tweeter Array an additional 12°.

Acoustic Isolation Technology: The AIM Series 2 in-ceiling speaker utilizes Acoustic Isolation Technology to decouple the speaker housing from the surrounding materials, providing a more acoustically inert installation and improving sound transference to the listening area by eliminating structural resonance created by the surrounding wall or ceiling. The minimized resonance transfer is achieved using co-molded, lower density compounds.

Vortex Eliminators: The AIM 2 in-ceiling speaker's Vortex Eliminators disperse sound as it reaches the outer edge of the speaker baffle. Acoustically, this moves the speaker closer to the surface of the ceiling, improving the overall dispersion of sound and eliminating any tunnel effect found in ordinary ceiling speakers.

Treble Adjustment Switch: The acoustic compensation switch labeled "Treble" allows for 6dB of tweeter adjustment. The factory setting is set at 0dB (neutral) of treble. If you desire less treble, slide the switch to the "- position" for -3dB of
treble; if you desire additional treble, slide the switch to the "+ position" for +3dB of treble.

Speaker Terminals: The SpeakerCraft in-ceiling speaker is fitted with spring-post speaker terminals that will accommodate bare wire (up to 12AWG), pin-connectors, and banana plugs (single or dual).

Paintable Grille: The in-ceiling speaker comes with a perforated metal grill finished in white. It can be painted to match the color of your ceiling.

In-Ceiling Applications: The AIM Series 2 in-ceiling speaker can be used in a wide variety of home theater and distributed audio installations. These in-ceiling speakers have been crafted to support sophisticated installations, demanding sonic performance, and advanced object-based surround audio platforms such as Dolby Atmos, Auro-3D, and DTS:X.

In-Ceiling Installation: Its round shape and low-profile speaker grille allow the AIM Series 2 in-ceiling speaker to mimic the look of a recessed lighting fixture. The speaker requires a cutout of 8.4375" and a mounting depth of 5.5". The speaker frame has a diameter of 9.625". Once the hole is cut, the speaker can be dropped in and the rotating cams can be tightened, allowing you to secure the speaker to the drywall without any extra assembly.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound