Features

Wiring: The wiring harness connects to the right end of the sound bar with a threaded waterproof plug. The auxiliary input, line output, power and ground wires run together in a 9' protective sleeve. Once the sleeve ends, each wire extends another 3' and the power and ground wires are terminated with ring terminals (1/2" outer diameter, 1/4" inner diameter). The power wire also has an in-line fuse holder with a 20-amp ATO fuse installed.

Inputs: The Stealth 10 Ultra has two inputs, Bluetooth and a 3.5mm mini-jack (female). If the unit is paired with a Bluetooth device when turned off, it will automatically attempt to reconnect when turned back on.

Output: There is also a 3.5mm mini-jack (female) line output, useful for connecting another amplifier, a subwoofer, or a second Stealth 10 Ultra.

Auto Turn-off: When the unit does not sense any input signal for approximately 10 minutes (Bluetooth or auxiliary), the amplifier will turn off automatically.

Mounting: Two types of mounting options are included; mounting brackets that bolt to the ends of the sound bar and mounting studs that slide into a channel along the top or bottom of the sound bar. Either the brackets or studs can be used in multiple positions (the studs anywhere along the length of the speaker).

Controls: the backlit control panel is on the front of the sound bar, in the middle:

• Power: turn the unit on/off; pauses Bluetooth playback; mutes aux input
• Volume: up/down
• Skip: skip tracks forward or backward when listening to Bluetooth device
• Source: switch between the Bluetooth and auxiliary inputs