About the Wet Sounds XS-10FA-S4
Get some bass for your boat
Get some bass for your boat
Built tough for life on the water
Wet Sounds designed this 10" marine subwoofer to give you impressive bass, worry-free performance, and plenty of style. Designed by boaters for boaters, this 4-ohm sub's sleek silver finish and rugged grille will look great on your boat.
Made for marine use
Wet Sounds built this sub to survive the often-harsh extremes of the marine environment — the cast-aluminum frame is powder-coated, the speaker terminals are gold-plated, and the cone is made from injection-molded composite. The sub's spider and surround are both made from durable rubber, so they'll resist moisture and damaging sunlight for seasons to come.
Install it almost anywhere
The XS-10FA-S4 works perfectly in a 1.3 cubic foot sealed enclosure, but Wet Sounds designed it for "free-air" applications. That's a very groovy way of saying you don't need to put this sub in a box to get the low-end thump you want. Mount it in a bulkhead, storage compartment, or wherever it fits — you'll be impressed by the sound regardless.
Product highlights:
- 10" 4-ohm marine subwoofer
- injection-molded composite woofer with rubber surround
- powder-coated cast aluminum frame
- gold-plated, marine-grade brass binding posts
- marine-grade rubber spider and magnet boot
- designed for free-air applications or a 1.3 cu. ft. sealed enclosure
- power range: 50-300 watts RMS (600 watts peak)
- frequency response: 20-500 Hz
- sensitivity: 88 dB
- top-mount depth: 4-9/16"
- cutout diameter: 9-3/8"
- warranty: 2 years
- MFR # XS-10FA-S4
What's in the box:
Wet Sounds XS-10FA-S4 owner's manual
- 10" Marine subwoofer
- Silver grille
- Six 1-1/2" Stainless steel Phillips head screws
- Owner's manual
- Template
Customer reviews for Wet Sounds XS-10FA-S4
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Wet Sounds XS-10FA-S4
Product Research
Features
Rubber Spider: Durability is improved by the rubber spider Wet Sounds developed for their marine speakers.
Terminals: The wire terminals are gold plated binding posts; they will accept pin connectors, spade lugs, single banana plugs, and bare wire up to 8 gauge. The binding posts are spaced too far apart (approximately 1-1/8") to accept standard dual banana plugs.
Free Air Mounting: The XS-10FA S4 is optimized for Free Air (infinite-baffle) mounting or a 1.3 ft³ sealed enclosure.
Sealed Enclosure: If mounting the subwoofer in an enclosure, use a 1.3 ft³ sealed enclosure. Wet Sounds recommends building the enclosure of marine grade plywood with a minimum thickness of 3/4". Internal bracing should be incorporated so the enclosure is as rigid as possible. All joints should be glued and fastened with screws. Additionally, internal joints should be covered with a small bead of silicone adhesive to ensure the enclosure is completely air-tight. To avoid air leakage, a foam rubber gasket or similar sealing method should be applied between the loudspeaker and the enclosure.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Easy install replace a clarion sub and speaker with wet sound speakers and subwoofer this this is so clear great bass sound!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mikep from Mississippi