Chat
Contact us
Close contact box
Connect ID #
479 713 897 4
Connect ID #
479 713 897 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

WyreStorm Express™ HDMI Splitter HD/4K-capable HDMI splitter (1 in, 2 out)

Item # 876SP1024K

People call us every day looking for ways to display the same high-res video source on more than one screen.

People call us every day looking for ways to display the same high-res video source on more than one screen.

2 questions - 2 answers

Item # 876SP1024K

Shop all WyreStorm A/V Source Switchers

About the WyreStorm Express™ HDMI Splitter

Steve Kindig

High-resolution solution for dual-display video

People call us every day looking for ways to display the same high-res video source on more than one screen. HDMI splitters aren't new, but the extra bandwidth demands of 4K Ultra HD video are well beyond the capabilities of typical HD-rated HDMI splitters. Good thing we have the WyreStorm Express™ SP-01024K.

High-resolution solution for dual-display video

WyreStorm Express SP-01024K

This WyreStorm Express HDMI splitter sends the signal from an HD or 4K Ultra HD video source to two displays, such as two TVs or a TV and a projector.

People call us every day looking for ways to display the same high-res video source on more than one screen. HDMI splitters aren't new, but the extra bandwidth demands of 4K Ultra HD video are well beyond the capabilities of typical HD-rated HDMI splitters. Good thing we have the WyreStorm Express™ SP-01024K.

This "1 x 2" splitter has one HDMI input and two HDMI outputs, and supports video formats up to 3840 x 2160 (30 frames per second). The SP-01024K is a great solution if you're looking to watch a movie or game on a couple of TVs, or if you have a TV and projector in the same room. Setup is plug-and-pay simple, and operation couldn't be easier — there aren't any buttons!

READ LESS

Product highlights:

  • connects 1 HDMI audio/video source to 2 separate displays
  • supports Ultra HD and HD video formats up to 3840 x 2160 @ 30Hz, 3D capable up to 1080p/60Hz
  • supports HDMI 1.4a features (10.2 Gbps maximum data rate)
  • plug and play connectivity with automatic EDID (Extended Display Identification Data) and HDCP communication
  • transmission distances over High-Speed HDMI cables up to 10 meters/33 ft. (4K/1080p input, 4K output); 15 meters/49 ft. (1080p output)
  • additional units can be cascaded (daisy-chained) to create a large distribution system (up to 12 times for 1080p, 2 times for 4K)
  • AC adapter included
  • 5-1/2"W x 3/4"H x 2-5/8"D
  • warranty: 1 year
  • MFR # EXP-SP-0102-4K

What's in the box:

  • 4K HDMI splitter (1 in/2 out)
  • AC power adapter (w/ attached 4' DC cord)
  • 3 AC plug inserts (US/UK/EU)
  • 2 Brackets
  • 2 Screws

Customer reviews for WyreStorm Express™ HDMI Splitter

Loading reviews...

Average review:

5.0 out of 5 stars
6 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the WyreStorm Express™ HDMI Splitter

Stacey B.
The WyreStorm Express™ HDMI Splitter replaces these items:

Product Research

Features

4K HDMI Splitter (1 in/2 out): The WyreStorm Express EXP-SP-0102-4K is a professional-grade HDMI splitter with a single HDMI input and dual HDMI outputs. The WyreStorm Express splitter provides distribution and replication of a single Ultra-HD (4K) or HD (1080p) source to two separate displays. Its perfect for Retail AV, Commercial, and Hospitality installation.

Note: The EXP-SP-0102-4K does not upscale or down-convert the video signal. Make sure your TV is compatible with the video signal input and output by the EXP-SP-0102-4K.

HDMI 1.4a: Featuring HDMI 1.4a specification supporting data rates up to 10.2Gb/s, for lossless audio/video formats, full 3D and Lip Sync, the EXP-SP-0102-4K also includes 24-bit True Color with chroma-subsampling rate of 4:2:2 for 4K color palette and 36-bit Deep Color for 1080p transmissions. 

HDCP & EDID Management: Automatic HDCP and EDID management continuously negotiates and authenticates communication between connected devices, ensuring simultaneous distribution of source content to all outputs, while also maintaining signal integrity via internal equalization and amplification to output devices.

Note: The EXP-SP-0102-4K's HDMI jacks do not support the latest HDCP 2.2 copyright protection for 4K ultra-HD content, so it will not support 4K content from satellite/cable providers, online video services, and Blu-ray disc which are copyright protected with HDCP 2.2.

Transmission Distance: The EXP-SP-0102-4K provides 4K transmission over 33' or 1080p transmission over 49'.

Expandability: Systems can be further expanded by cascading multiple EXP-SP-0102-4K units to create larger distributions; with 4K transmissions cascaded twice and 1080p signals up to 12 times to the same model units for flexible, scalable solutions for residential and commercial applications. 

Compact Design: Compact for unobtrusive installations, measuring only 5.5625" (w) x 1.75" (h) x 4.0625" (d).

AC Power Adapter: The WyreStorm Express EXP-SP-0102-4K operates off of standard household AC current using the supplied external AC power adapter.

  • Input: 100-240V, 60/60Hz, 0.2A
  • Output: DC 5V, 1A

Specifications:

  • Video Amplifier Bandwidth: 10.2Gbps
  • Input Video Signal: 0.5-1.2 volts p-p
  • Input DDC Signal: 5 volts p-p (TTL)
  • Output Video: HDMI v1.4a + HDCP1.0/1.1
  • Maximum Single Link Range: 4K x 2K 24-bit True Color / 1080p 36-bit Deep Color 
  • Transmission distance: 4K transmission over 33' / 1080p transmission over 49'
  • Video Format Supported: 480i, 480p, 576i, 576p, 720p, 1080i, 1920x1080p @ 60Hz, 3840 (UHD), 4096 (DCI) 2160 @ 30Hz
  • Audio Format Supported: DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, 7.1, stereo
  • Maximum Pixel Clock: 340MHz
  • Video Impedance: 100
  • Power Supply: 5VDC/1A - from mains
  • Power Consumption: 4K: 1.7 W (Max.), 1080p: 1.2 W (Max.)
  • Operating Temperature Range: -32° to +95° F (-0° to +35°C)
  • Operating Humidity Range: 10% to 90% RH (no condensation)
  • Dimensions: 5.5625" (w) x 1.75" (h) x 4.0625" (d)

     

Loading accessories...

Customer Q&A

2 questions already asked

Q
Would like this setup: Split HDMI and send Output 1 to TV1, Convert HDMI 2 to Ethernet, then Ethernet to HDMI and connect to TV2. Would this splitter support this configuration?
michael t  May 31, 2018
1 answer
A
The splitter does not provide the balanced line adapters (HDMI to Cat5/6) but will provide the dual HDMI outputs from a single HDMI source input.
ryan  Jun 09, 2018 (Staff)
Q
Will you be able to split a comcast hd cable box to 2 different televisions? The current cable boxes seem to be protected from this type of arrangement.
gary  Aug 17, 2015
1 answer
A
I forwarded your question to an Advisor and they responded with the following: If you are using an HDMI output from the cable box you can use the WyreStorm Express SP-0102 HDMI splitter. This will let you split to two TVs but you have to watch the same channel on both. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.
kristina  Aug 23, 2015 (Staff)

Loading articles...

Compare the sound