About the Clare Controls amp.14150
A high-powered amp built for multi-room installations
A high-powered amp built for multi-room installations
Rated at an impressive 150 watts per channel into 8 ohms, the Clare Controls amp.14150 multi-channel amplifier delivers plenty of clean power to drive just about any speaker. Unlike traditional amps that run hot and waste a lot of energy, the amp.14150 boasts a high-efficiency Class D design based on Bang & Olufson's great-sounding ICEpower® technology. Plus, its advanced switch-mode power supply consumes less than half a watt in standby mode for lower-cost operation. You get 14 channels of high-quality audio performance in a surprisingly compact, cool-running package that's versatile and easy to install.
Flexible options for enjoying music throughout your home
The amp.14150 can distribute music from one audio source, such as a networked music streamer, to multiple rooms in your home. Or you can connect additional sources directly to the individual amplifier channel pairs and assign each one to a single listening room. Each channel pair features its own separate level control so you can easily adjust the volume to fine-tune the sound of your system. Enjoy clear stereo sound in up to seven rooms.
Product highlights:
- 14-channel amplifier powers up to 7 zones
- 150 watts RMS per channel into 8 ohms
- ICEpower Class D amplifier with advanced switch-mode power supply for exceptional audio quality and efficiency
- frequency response: 10-20,000 Hz (±0.4 dB at 4 ohms, 8 ohms, or open load)
- dynamic range: 115 dB
- total harmonic distortion: 0.003% (at 1kHz, 4 ohms, 1 watt)
- stereo RCA global bus input for distributing a single audio source among multiple amplifier channels of your choice
- stereo RCA global bus output for "daisy-chaining" additional amplifiers without the need for "Y" adapters or signal splitters
- individual gold-plated RCA audio inputs for all 14 channels
- source selection dip switches for each channel pair allows you to select between the global bus input or individual channel inputs
- independent gain adjustment for each channel pair allows volume fine tuning and maximum volume level settings for each zone
- 12-volt power turn-on trigger with 3.5mm input jack
- removable Phoenix-style speaker connectors accommodates up to 14 gauge stranded wire
- nine independent protection circuits for monitoring temperature, current, and voltage to assure optimal reliability
- quiet, variable-speed cooling fan
- standby power consumption: less than 0.5 watts
- detachable AC power cord
- rack mountable chassis (2U rack mount height)
- 17-1/16"W x 3-1/2"H x 16"D
- weight: 10 lbs.
- warranty: 3 years
- MFR # AMP-14150
What's in the box:
Clare Controls amp.14150 owner's manual
- 14-Channel amplifier
- 6' AC power cord
- 14 Speaker terminal blocks
- 2 Rack ears
- 4 Screws (w/ washers attached)
- User Guide
Customer reviews for Clare Controls amp.14150
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Clare Controls amp.14150
Features & specs
General | ||
---|---|---|
Number of Channels | 14 | |
Power Output per Channel (8 ohms) | 150 | |
Power Output per Channel (6 ohms) | --- | |
Power Output per Channel (4 ohms) | 300 | |
Frequency Bandwidth | 10-20k | |
THD | 0.003% | |
Minimum Impedance | 4 | |
Bridged Power per Channel | 0 watts | |
Speaker Outputs | 14 | |
THX Certification | No | |
Width (inches) | 17 | |
Height (inches) | 3-1/2 | |
Depth (inches) | 16 | |
Weight | 10 pounds | |
Parts Warranty | 3 Years | |
Labor Warranty | 3 Years | |
Inputs & Outputs | ||
Number of Inputs | 8 | |
Input Type | RCA | |
Removable Power Cord | IEC 3-prong | |
Level Controls | Yes | |
Speaker Connectors | Phoenix-style |
Product Research
Features
Overview: The Clare Controls Amp.14150 incorporates seven matched two-channel Class D amplifiers which combine to deliver seven zones of clean audio performance for distribution of music throughout your home or office. The 14-channel amplifier provides incredible power and superior sound in a compact, installer friendly chassis.
14-Channel Class D Amp: The Amp.14150 uses Class D amplifier technology which runs cooler and is more efficient (>90%) than traditional Class A/B amps. The Clare Controls Amp.14150 amplifier is rated at 150 watts (RMS) x 14 channels in 8Ω or 300 watts (Peak) x 14 channels in 4Ω.
Two Independent Feedback Loops: The use of two independent feedback loops allow the Amp.14150 to provide lower distortion, less noise on output, a frequency response less dependent on load, and lower output impedance than other Class D amps. The result is a natural, relaxed and dynamic sound with excellent stereo perspective and a tightly controlled precise bass that will do justice to all your music sources.
7 Zone Inputs w/ Gain Control: The Amp.14150 features seven stereo RCA inputs to connect up to seven different audio sources. Each pair of channel inputs has its own gain adjustment.
Global Switching: The Global input (stereo RCA) allows output of the same stereo audio source to be amplified across all channels of the amplifier which are set to "Global" for easy multi-room applications. You can use the Global gain to control the maximum output for all Global channels at once. The Global output (stereo RCA) allows the Global input of the amplifier to be sent to another amplifier in your system.
Speaker Terminals: Each speaker connection features a removable Phoenix-style connector that accommodates 18 to 14-gauge stranded speaker wire.
Trigger Input: The amplifier can be triggered to turn-on via the 12VDC trigger input (3.5mm) on the rear of the amplifier. This allows the amp to remain in Standby mode until it is required for used, thereby greatly reducing overall power consumption.
Protection Circuits: The Amp.14150 implements a total of nine independent protection circuits, monitoring the temperature, current and voltage of several different functional blocks, assuring uninterrupted music until maximum limits are reached.
Switched-Mode Power Supply: Using technologies designed by ICEpower, a subsidiary of Bang & Olufsen, the Amp.14150 uses an advanced switched-mode power supply that consumes less than 0.2W in standby.
Rack-Mountable: The Amp.14150 comes with a pair of rack ears and hardware to mount the 14-channel amplifier in your rack system. The Amp.14150 takes up 2U rackmount spaces.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...