About the Wilson DB Pro 4G
A better way
A better way
Do you have to move to a certain room in your home to get good cell phone reception? Do you have to hold your phone pointed in a particular direction in your office to keep from dropping calls? With the Wilson DB Pro 4G signal booster kit, you can finally have full use of your cell phone inside your home or office. The booster can strengthen the 3G and 4G signals for virtually all major U.S. cellular networks.
The signal booster features five bands with adjustable gain for greater signal strength.
A simple system
The DB Pro 4G kit has everything you need to get started. It features an outdoor antenna you mount facing the direction where the signal is strongest. Coaxial cable is provided to convey the signal from that antenna to an indoor signal booster, and from that booster to an indoor wall-mountable antenna. That antenna can broadcast the strengthened signal throughout multiple rooms, ensuring fewer dropped calls and faster data downloads.
Stronger signals throughout your home
The booster delivers up to 65 dB of gain, which amplifies the available signal to expand your coverage, and boost 3G/2G data rates in areas with weak signal. The booster features five bands with adjustable gain, to minimize interference and keep your phone connection steady.
Note: According to FCC regulations, you must register this device with your wireless provider and have their consent before use. Most wireless providers allow the use of signal boosters, but if you are unsure, please contact your provider.
Product highlights:
- for indoor multi-room use
- kit includes:
- outdoor directional antenna with mounting hardware
- two 30-foot coils of RG6 coaxial cable
- signal booster with adjustable gain
- wall- or ceiling-mountable indoor antenna
- AC power adapter
- improves wireless cellular coverage — including 4G, 3G, and 2G data downloads
- 5-band operation (Band 17/700 MHz, Band 13/700 MHz, Band 5/850 MHz, Band 4/1700-2100 MHz, Band 25/1900 MHz)
- maximum gain: 65 dB
- 6-1/2"W x 4-1/4"H x 1-3/4"D (signal booster)
- signal booster weight: 1-1/4 oz.
- warranty: 2 years
- MFR # 460103
What's in the box:
Wilson DB Pro 4G owner's manual
- DB Pro 4G signal booster
- AC adapter with attached 5' DC output cord (DC output: 5V 2.5A)
- Inside antenna with 9" coax pigtail
- Outside antenna with 9" coax pigtail
- L-bracket (for installing outside antenna)
- Wall mount bracket (for installing inside antenna)
- 4 Self-tapping screws
- 4 Plastic wall anchors
- 4 M3 screws (10mm length)
- 4 Flat washers
- 4 Split-lock washers
- Two 30' lengths of RG-6 coax cable
- Barrel connector (2 female F-type connectors)
- 2 Pole brackets
- 2 U-bolts
- 4 Flat washers
- 4 Split-lock washers
- Installation Instructions
- L-bracket Mounting Instructions
- Product Registration card
Customer reviews for Wilson DB Pro 4G
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Wilson DB Pro 4G
Product Research
Features
Overview: The Wilson Electronics DB Pro 4G Cellular Signal Booster is designed to improve the cell signal inside your home or office. Voice calls are clearer, you'll have fewer dropped calls and dead spots, and data rates (including 4G, 3G and 2G data) will increase. All cellular devices, including phones, data cards, and tablets, connect to the system wirelessly. The DB Pro 4G works with all major carriers, and amplifies the signal in multiple rooms inside your home or office.
Simple Installation: The DB Pro 4G cell phone signal booster consists of three main components: the booster, an outside wide-band directional (receiving) antenna, and an inside panel (transmitting) antenna. The booster can be placed on a flat surface, such as a shelf, closet, or desk. It will need to be placed near a power outlet, and must be connected to a surge protector with at least a 1000 Joule rating (to avoid voiding the 2 year warranty). The outdoor wide-band directional antenna should be mounted using the included "L" bracket and pole mount kit. The indoor panel antenna should be wall mounted using the included bracket. Both antennas connect to the booster via the included RG6 coax cables.
Controls: The DB Pro 4G booster unit has four gain control knobs--one for the each band: 1700/2100MHz, 1900MHz, 800MHz, and 700MHz. Indicator lights are provided for each of the four signal bands show when the unit is being overloaded (orange), has shut down to prevent oscillation (red), or operating properly (green).
Benefits: The Wilson Electronics DB Pro 4G helps increase the signal strength in typically weak signal areas. With stronger signals, your cell phone doesn't have to work as hard to find a signal, extending battery life. Data rates are increased, meaning 4G, 3G and 2G data download times are reduced.
Specifications:
- Frequencies:
- Band 17: 700 MHz
- Band 13: 700MHz
- Band 5: 800 MHz
- Band 4: 1700/2100 MHz
- Band 25: 1900 MHz
- Maximum Gain: 65dB
- Antenna Connectors: Male/Female F connectors for both antennas
- Dimensions:
- Booster: Width=4.53", Height=1.375", Depth=6.438"
- Outside Wide-band Directional Antenna: Width=11.75", Height=8.21", Depth=2.55"
- Inside Panel Antenna: Width=7.005", Height=8.698", Depth=2.25"
Legal Disclosure: The DB Pro 4G cell phone signal booster is a consumer device, and is FCC certified to 2014 technical specifications. Before you use the product, you must register the device with your wireless provider, and have your provider's consent. Most wireless providers consent to the use of signal boosters, however, some providers may not consent*. You must operate the device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 8" from any person.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...