Features

Overview: The Wilson Electronics DT4G Cellular Signal Booster is designed to improve the cell signal inside your home or office. Voice calls are clearer, you'll have fewer dropped calls and dead spots, and data rates (including 4G, 3G and 2G data) will increase. All cellular devices, including phones, data cards, and tablets, connect to the system wirelessly. The DT4G works with all major carriers, and amplifies the signal in multiple rooms inside your home or office.

Simple Installation: The DT4G cell phone signal booster consists of three main components: the booster, the outside (receiving) antenna, and the inside (transmitting) antenna. The booster can be placed on a flat surface, such as a shelf, closet, or desk. It will need to be placed near a power outlet, and must be connected to a surge protector with at least a 1000 Joule rating (to avoid voiding the 2 year warranty). The outdoor antenna can be mounted using the included pole mount kit, or the included wall mount kit. For a temporary installation, you can mount the antenna to the inside of a window, using the cradle/suction cup mount. The indoor antenna can be placed on a shelf or window sill. The outside antenna connects to the booster via the included RG6 coax cable, while the inside antenna cable has a male SMA terminal.

Controls: The DT4G booster unit has four gain control knobs--one for the each band: 1700/2100MHz, 1900MHz, 800MHz, and 700MHz. Indicator lights are provided for each of the four signal bands show when the unit is being overloaded (orange), has shut down to prevent oscillation (red), or operating properly (green).

Benefits: The Wilson Electronics DT4G helps increase the signal strength in typically weak signal areas. With stronger signals, your cell phone doesn't have to work as hard to find a signal, extending battery life. Data rates are increased, meaning 4G, 3G and 2G data download times are reduced.

Specifications:

• Frequencies:
  • Band 17: 700 MHz
  • Band 13: 700MHz
  • Band 5: 800 MHz
  • Band 4: 1700/2100 MHz
  • Band 25: 1900 MHz
• Maximum Gain: 60dB
• Antenna Connectors: SMA Male/Female for inside antenna; F Male/Female for outside antenna
• Dimensions:
  • Booster: Width=4.53", Height=1.375", Depth=6.438"
  • Outside Antenna: Width=7.231", Height=8.926", Depth=2.29"
  • Inside Antenna: Width=1.881", Height=5.131", Depth=2.556"

Legal Disclosure: The DT4G cell phone signal booster is a consumer device, and is FCC certified to 2014 technical specifications. Before you use the product, you must register the device with your wireless provider, and have your provider's consent. Most wireless providers consent to the use of signal boosters, however, some providers may not consent*. You must operate the device with approved antennas and cables as specified by the manufacturer. Antennas must be installed at least 8" from any person.