About the Audiofrog G10D4
A new name in bass
Audiofrog brings you powerful, versatile subs that are designed to handle today's high-powered amplifiers. Their G Series subs feature a treated paper cone with a rubber surround for long life and high performance, housed in a stamped steel, vented basket for rigidity and durability. Audiofrog's designers focused on creating a tough, reliable sub by by building extra venting into the basket to help cool the voice coils. The pole piece and back plate are also polished and extended to achieve magnetic symmetry above and below the gap. Translation? You'll hear less distortion when you're turning up the bass..
600 watts power handling
The G10D4 10" subwoofer handles up to 600 watts RMS, while the two 4-ohm voice coils give you the option of running it at 8 ohms for multi-sub setups or at 2 ohms to maximize your amp's power output. And Audiofrog designed this sub to be equally comfortable in a sealed or a ported enclosure. If you're looking for performance, get acquainted with Audiofrog.
Product highlights:
- 10" dual 4-ohm component subwoofer
- treated paper cone with rubber surround
- handles up to 600 watts RMS (750 watts peak)
- frequency response: 24-200 Hz
- sensitivity: 90 dB
- top-mount depth: 6-1/4"
- sealed box volume: 0.5-0.76 cubic feet
- ported box volume: 0.85-1.75 cubic feet
- warranty: 1 year
- MFR # G10D4
What's in the box:
Audiofrog G10D4 owner's manual
- One 10" Dual 4-ohm voice coil subwoofer
- Instruction manual
Customer reviews for Audiofrog G10D4
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audiofrog G10D4
Features & specs
| Features and Specs | ||
|---|---|---|
| Size | 10 -inch | |
| Impedance (Ohms) | --- | |
| Cone Material | Treated Paper | |
| Surround Material | Rubber | |
| Port diameter (inches) | 3 | |
| Port length (inches) | 13 | |
| Free-Air | No | |
| Dual Voice Coil | Yes | |
| Sensitivity |
90 dB at 2.83 volts | |
| Frequency Response | 24 - 180 Hz | |
| Max RMS Power Handling | 600 | |
| Peak Power Handling (Watts) | 750 | |
| Top Mount Depth (inches) | 6 1/8 | |
| Bottom Mount Depth (inches) | 6 3/4 | |
| Cutout Diameter or Length (inches) | 9 3/16 | |
| Frame Width | 10.6 | |
| Frame Length | 10.6 | |
| Vas (liters) | 34.3 | |
| Fs (Hz) | 30 | |
| Qts | 0.51 | |
| Xmax (millimeters) | 14.5 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Box Requirements | ||
| Ideal Sealed Box Volume (cubic feet) | 0.6 | |
| Minimum Sealed Box Volume (cubic feet) | 0.5 | |
| Maximum Sealed Box Volume (cubic feet) | 0.76 | |
| Ideal Ported Box Volume (cubic feet) | 1 | |
| Minimum Ported Box Volume (cubic feet) | 0.85 | |
| Maximum Ported Box Volume (cubic feet) | 1.75 | |
Product Research
Features
Dual Voice Coils: This woofer features two 4Ω voice coils, allowing impedance flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Binding Posts: The binding post wire terminals will accept pin connectors, spade lugs, single banana plugs, and bare wire up to 8-gauge. The binding posts are spaced too far apart to accept standard dual banana plugs (3/4").
Sealed Box Volume: The recommended sealed box volume range is from 0.5 ft³ to 0.75 ft³, with 0.6 ft³ being the ideal size. A sealed enclosure design gives the smoothest response with increased energy at the lowest frequencies.
Ported Box Volume: The recommended ported box volume range is from 0.85 ft³ to 1.75 ft³. The ideal size is 1.0 ft³, for which both slot and tube style port measurements are given; both result in a tuning frequency of 33 Hz:
- Slot: 11" x 1" opening, 17.5" long
- Tube: 3" diameter x 13" long
Power Handling: Audiofrog lists two RMS power figures in the manual; 250 watts RMS in the technical specifications section and 100-600 watts RMS in the recommendations section. We've listed the recommended range in the specs table.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
