About the Audiofrog GS682
Make the leap to better sound
The low profile of the GS682 tweeter makes it a better fit in the factory location of more vehicles.
Make the leap to better sound
If you haven't heard of Audiofrog yet, here's what you need to know – there's no one like them. Drawing on decades of collective experience in the car audio field, the folks at Audiofrog have translated their practical knowledge of what makes great sound into the GS682, a no-nonsense, high-quality coaxial speaker.
Let's start with the 6"x8" woofer — a strong polypropylene cone gives you terrific response, while its parabolic shape and 1" copper voice coil ensure impressive power handling. The GS682's 1" tweeter takes on the high frequencies with gusto thanks to an incredibly resilient soft dome design, while minimal tweeter protrusion allows these speakers to fit in more vehicles. But here's where Audiofrog separates themselves from the pack — this coaxial speaker sports a true 2-way crossover network that's built into the basket to ensure the right frequencies go to the right drivers for a seamless transition between highs and lows.
Road-tested
You'll want to power these speakers with an outboard amp to hear their incredible clarity. The confident sound of the GS682 is built upon a full one hundred of hours of testing and abuse, during which these speakers have to perform under the strain of extreme heat, humidity, and cold. This commitment to quality means that your Audiofrog speakers will deliver beautiful sound in your car for many, many years.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
- 2-way car speakers (pair)
- 6"x8" parabolic polypropylene woofer with rubber surround
- 1" fabric dome tweeter with wave guide faceplate
- built-in 2-way crossover (12dB/octave high-pass, 6dB/octave low-pass)
- power range: 15-75 watts RMS (200 watts peak power)
- frequency range: 47-20,000 Hz
- sensitivity: 89 dB
- top-mount depth: 2-5/16"
- impedance: 4 ohms
- grilles not included
- warranty: 1 year
- MFR # GS682
What's in the box:
Audiofrog GS682 owner's manual
- Two 2-way speakers
- 2 Bottom mount rings
- Instruction manual
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Audiofrog GS682
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audiofrog GS682
Features & specs
General | ||
---|---|---|
Speaker Size | 6X8 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Fabric | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 89 | |
Frequency Response | 47 - 20k Hz | |
Minimum RMS Wattage | 15 | |
Maximum RMS Wattage | 70 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | 2 15/16 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.525 | |
Frame Width | 5.753 | |
Frame Length | 8.027 |
Product Research
Features
Tweeter: The 1" polyester fabric dome tweeter uses a neodymium magnet and includes a reflection absorbing and diffusing foam pad to smooth the high frequency output.
Waveguide: The tweeter includes a small waveguide designed to boost the tweeter's low frequencies and ensure a smooth transition to the midrange.
Crossover: Frequency division is controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals.
Power Handling: Audiofrog lists two RMS power figures in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These speakers sound great I here sounds that I have not herd before on some songs. They take the watts that my amp will give them. Good bass for a small speaker. Have them in all four doors. The kids can't believe an old man can have such a great sounding truck. Thanks LR
LONNIE R from Puyallup, WA