About the Biketronics BT7P1
Big dogs for hogs
Big dogs for hogs
For me, there's no hitting the highway without cranking the tunes. For you Harley owners out there, enjoying big sound can be a challenge on the open road. But Biketronics has come up with an impressive solution for powerful audio that'll dominate wind and engine noise. The BT7P1 2-way speakers sport a plentiful 7.1" waterproof woofer cone that delivers resonant bass and the rich dynamics of the midrange. A silk dome tweeter gives you smooth highs no matter how bumpy the road below.
And with power handling up to 100 watts RMS, you have a high ceiling for amplification, which means you can enjoy serious volume every mile you travel. These weatherproof BT7P1 speakers will endure the extremities of road life, and Biketronics backs them with a lifetime warranty.
No modification necessary
Biketronics keeps installation straightforward with their supplied speaker adapters that fit perfectly in compatible Harley-Davidson motorcycles.
Product highlights:
- 7.1" 2-way weatherproof speakers (pair)
- compatible with 1996-2013 Harley Davidson ElectraGlide/StreetGlide fairings
- waterproof treated paper woofer with rubber surround
- silk dome tweeter
- includes vehicle-specific adapters and stainless steel mounting hardware
- 4-ohm impedance compatible with 1, 2, or 4-ohm systems
- power range: 5-100 watts RMS (200 watts peak power)
- frequency response: 45-22,000 Hz
- sensitivity: 92.6 dB
- grilles included
- warranty: lifetime
- MFR # BT7P1EG
What's in the box:
Biketronics BT7P1 owner's manual
- Two 2-way speakers
- 2 Mounting brackets
- 2 Grilles
- Eight 3/4" Screws
- Six 7/8" Screws
- Warranty information
- Instructions
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Biketronics BT7P1
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Biketronics BT7P1
Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Treated Paper | |
Woofer Surround | Rubber | |
Parts Warranty | Lifetime | |
Labor Warranty | Lifetime | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92.6 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 45 - 22k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | N/A | |
Bottom-mount Depth (Inches) | 4 3/8 | |
Cutout Diameter or Length (inches) | 6 1/8 | |
Mounting Height (Inches) | --- | |
Frame Width | 7.056 | |
Frame Length | 7.056 |
Product Research
Features
Overview: The Biketronics BT7P1 is an oversized two speaker system designed as a drop-in replacement for the factory speakers in select 1996-2013 Harley-Davidson systems.
Compatibility: The BT7P1 replaces the two fairing speakers in select 1996-2013 Electra Glide and Street Glide models. The included brackets allow the oversized speakers (which Biketronics calls 7.1") to easily replace the smaller factory speakers. The speaker terminals are sized like the original speakers, so the factory wiring plugs in without an adapter.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...