About the Biketronics BT7P1RG
Big dogs for hogs
Big dogs for hogs
For me, there's no hitting the highway without cranking the tunes. For you Harley owners out there, enjoying big sound can be a challenge on the open road. But Biketronics has come up with an impressive solution for powerful audio that'll dominate wind and engine noise. The BT7P1RG 2-way speakers sport a plentiful 7.1" waterproof woofer cone that delivers resonant bass and the rich dynamics of the midrange. A silk dome tweeter gives you smooth highs no matter how bumpy the road below.
And with power handling up to 120 watts RMS, you have a high ceiling for amplification, which means you can enjoy serious volume every mile you travel. These weatherproof BT7P1RG speakers will endure the extremities of road life, and Biketronics backs them with a lifetime warranty.
No modification necessary
Biketronics keeps installation straightforward with their supplied speaker adapters that fit perfectly in compatible Harley-Davidson motorcycles.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
- 7.1" 2-way weatherproof speakers (pair)
- compatible with 1998-2014 Harley Davidson RoadGlide fairings
- waterproof treated paper woofer with rubber surround
- silk dome tweeter
- includes vehicle-specific adapters and stainless steel mounting hardware
- 4-ohm impedance compatible with 1, 2, or 4-ohm systems
- power range: 5-120 watts RMS (200 watts peak power)
- frequency response: 45-22,000 Hz
- sensitivity: 94 dB
- grilles not included
- warranty: lifetime
- MFR # BT7P1RG
What's in the box:
Biketronics BT7P1RG owner's manual
- Two 2-way speakers
- 2 Mounting brackets
- 2 Gauge rings
- 2 Gauge gaskets
- Eight 3/4" #8 Screws
- Sixteen 3/4" #6 Screws
- Warranty information
- Instructions
Customer reviews for Biketronics BT7P1RG
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Biketronics BT7P1RG
Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Treated Paper | |
Woofer Surround | Rubber | |
Parts Warranty | Lifetime | |
Labor Warranty | Lifetime | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92.6 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 45 - 22k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | N/A | |
Bottom-mount Depth (Inches) | 4 1/16 | |
Cutout Diameter or Length (inches) | 5 13/16 | |
Mounting Height (Inches) | --- | |
Frame Width | 7.056 | |
Frame Length | 7.056 |
Product Research
Features
Overview: The Biketronics BT7P1RG is an oversized two speaker system designed as a drop-in replacement for the factory speakers in select 1998 to 2013 Harley-Davidson systems.
Compatibility: The BT7P1RG replaces the two fairing speakers in select 1998 to 2013 Road Glide models. The included brackets allow the oversized speakers (which Biketronics calls 7.1") to easily replace the smaller factory speakers. The speaker terminals are sized like the original speakers, so the factory wiring plugs in without an adapter.
Note: 1998 to 2005 Road Glides must be updated to th newer style grill assembly; parts are available through most local Harley-Davidson dealerships (part numbers 77021-98B and 77022-98B). If you have trouble locating these parts, call Biketronics at 1-800-735-2419 for assistance. These speakers will also not fit 2012 or 2013 Road Glide CVO models without backdating to the 77021-98B and 77022-98B grills.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These are a definite upgrade from my original stock Harley Speakers! Need a Amp to fully drive them and they are loud! I'm running a Jensen HD1BT head unit and a RS400 Hawg Wired amp in my 2012 RG.
Big T from Waldorf, MD