About the Fortin FLU-100.2
Program your remote start system
If you're going to use a Fortin EVO-ALL or EVO-ONE universal data bypass module in your remote start system, you'll need their FLU-100.2 updater to flash it for your specific vehicle. And for those of who like to keep their systems at the cutting edge, you can use the FLU-100.2 to update your remote start system with the latest software as new versions become available from Fortin. Warranty: 1 year.
What's in the box:
Fortin FLU-100.2 owner's manual
- Flash Link Updater 2.0 module
- 48" USB cable (Type A USB on one end and Type B USB on other end)
- 22" Data-Link cable (4-pin plugs at both ends)
- User Guide
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Fortin FLU-100.2
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Fortin FLU-100.2
Product Research
Features
Overview: The FLU-100.2 Flash Link Updater 2 allows you to update the firmware on your Fortin bypass module and remote starter, including vehicle-specific firmware. The FLU-2 works with modules that have a bar code and a Service Number stamped on the label. You will need a PC running the Windows operating system and an Internet connection. A 4' USB cable and data-link cable are supplied.
Operating Systems: The FLU-100.2 works with a PC with Windows 10, 8, 7, Vista, XP, 2000, or Windows 98. Flashlink Manager3 software is required to update the firmware.
Simple Connections: There are only two connections on the Flash Link Updater 2. A Type B USB port lets you connect the Updater to your computer via the supplied USB cable. A 4-pin connector is provided for connecting the bypass module/remote starter using the provided data-link cable.
LED Indicators: Three LEDs are provided on the top of the Updater to indicate the status of the FLU-2:
- Red LED: Computer is connected
- Green LED: Module is connected
- Blue LED: Update is in progress
Customization: With the Flash Link Updater 2, you can update your bypass module and remote starter with the latest software available. With a simple point and click, you can easily enable or disable the following features:
Features Enabled by default that can be disabled | Features Disabled by default that can be enabled |
---|---|
|
|
Note: An Internet connection is not required to disable or enable features in the Options menu. Enabled or disabled features will vary with each vehicle platform. Not all features can be selected in all cases. |
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Works great for programming ...make sure to read and follow directions before you plug it in to your computer
Brandon from Massachusetts