About the Memphis Audio 15-M610D2
Big bass, Memphis style
Big bass, Memphis style
From Elvis to Stax, the "Memphis Sound" has always relied on a foundation of deep, rich bass to tie the music together. Now, Memphis Audio brings that bass tradition to your ride with their M6 Series subwoofers.
Ready to pound
Memphis Audio created the M6 Series 15-M610D2 10" subwoofer for high-performance bass reproduction. The fiberglass reinforced cone offers exceptional rigidity so it maintains accuracy at high levels, while its double-stitched rubber surround helps to maximize and control excursion. The vented cast aluminum basket keeps things cool, and virtually eliminates resonances that can color your bass.
Handles plenty of power
The 2.5" voice coils combine with a 120-ounce magnet to handle up to 500 watts RMS, so make sure you feed this sub plenty of power. The dual 2-ohm voice coils allow you to wire the sub for 1 or 4 ohms for system flexibility.
Product highlights:
- 10" dual 2-ohm voice coil subwoofer
- fiberglass-reinforced paper cone
- double-stitched rubber surround
- power handling: 500 watts RMS (1000 watts peak)
- sensitivity: 82 dB
- top-mount depth: 6-3/4"
- grille not included
- warranty: 1 year
- MFR # 15-M610D2
What's in the box:
Memphis Audio 15-M610D2 owner's manual
- One 10" Dual 2-ohm voice coil woofer
- Removable rubber mounting ring (installed)
- Warranty information
Customer reviews for Memphis Audio 15-M610D2
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Memphis Audio 15-M610D2
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Fiberglass/Paper | |
Surround Material | Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
82 dB at 1 watt | |
Frequency Response | --- | |
Max RMS Power Handling | 500 | |
Peak Power Handling (Watts) | 1000 | |
Top Mount Depth (inches) | 6 5/8 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.752 | |
Frame Length | 10.752 | |
Vas (liters) | 9.37 | |
Fs (Hz) | 41.4 | |
Qts | 0.559 | |
Xmax (millimeters) | 11 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.75 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | 1.7 | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Dual Voice Coils: This woofer features two 2Ω voice coils, allowing impedance flexibility. When the voice coils are wired in parallel, the woofer presents a 1Ω load. When the voice coils are wired in series, the woofer presents a 4Ω load.
Terminals: The two sets of spring post terminals are on the same side of the subwoofer. They will accommodate bare speaker wire up to 10 gauge. They will also accommodate many single banana plugs, but the post is slightly recessed, so some single banana plugs will not fit well. The binding posts are spaced too far apart to accept standard dual banana plugs (¾").
Sealed Box Volume: Memphis Audio recommends a sealed box volume of 0.75 ft³. A sealed enclosure design gives the smoothest response with increased energy at the lowest frequencies.
Ported Box Volume: The recommended ported box volume is 1.7 ft³ with a 10½" x 1¾" x 17¼" slot port; this yields a tuning frequency of 39 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed, maximizing bass output for a given amplifier.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
This hits hard. Very happy with my M6 ten. Very good lows and can handle anything you throw at it.
Rico from Hamilton,MS