About the Memphis Audio 15-PRX10S4
Thunder and lightning
Thunder and lightning
Sometimes the wind blows just right down Beale Street, and it brings up thunder and lightning. Memphis Audio built their Power Reference Series subwoofers to bring some low-frequency thunder into your ride. The 15-PRX10S4 10" subwoofer delivers big bass and high output, with an improved suspension and coil design that allows this sub to handle up to 250 watts RMS.
The power of paper
There's a reason that most electric bassists use paper speakers – it sounds warm! Memphis Audio uses a coated paper cone with a double-stitched foam surround to build a sub that creates classic bass tone while still standing up to the power demands of today's bass-heavy music. The 4-ohm impedance works great when you're bridging an amp or putting together a multi-sub setup.
Product highlights:
- 10" 4-ohm subwoofer
- treated paper cone with double-stitched foam surround
- cast-aluminum basket
- power handling: 250 watts RMS
- peak power handling: 500 watts
- sensitivity: 84 dB
- top-mount depth: 5-3/16"
- warranty: 1 year
- MFR # 15-PRX10S4
What's in the box:
Memphis Audio 15-PRX10S4 owner's manual
- One 10" Single voice coil woofer
- Removable rubber mounting ring (installed)
- Warranty information
Featured video:
Customer reviews for Memphis Audio 15-PRX10S4
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Memphis Audio 15-PRX10S4
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Treated Paper | |
Surround Material | Foam | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
83 dB at 1 watt | |
Frequency Response | --- | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 500 | |
Top Mount Depth (inches) | 5 1/4 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Frame Width | 10.85 | |
Frame Length | 10.85 | |
Vas (liters) | 17.11 | |
Fs (Hz) | 40 | |
Qts | 0.7 | |
Xmax (millimeters) | 12.95 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1 | |
Minimum Sealed Box Volume (cubic feet) | 0.76 | |
Maximum Sealed Box Volume (cubic feet) | 1.2 | |
Ideal Ported Box Volume (cubic feet) | 1.695 | |
Minimum Ported Box Volume (cubic feet) | 1.2 | |
Maximum Ported Box Volume (cubic feet) | 2.03 |
Product Research
Features
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Memphis Audio recommends a sealed enclosure of 1.0 ft³, yielding a -3 dB point of 44 Hz.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Memphis Audio recommends a ported enclosure of 1.695 ft³ with a 10-1/2" x 1-1/2" x 13-1/2" slot port, yielding a tuning frequency of 40 Hz and a -3 dB point of 31 Hz.
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...