About the Memphis Audio 15-PRX8S4
Thunder and lightning
Thunder and lightning
Sometimes the wind blows just right down Beale Street, and it brings up thunder and lightning. Memphis Audio built their Power Reference Series subwoofers to bring some low-frequency thunder into your ride. The 15-PRX8S4 8" subwoofer delivers big bass and high output, with an improved suspension and coil design that allows this sub to handle up to 200 watts RMS.
The power of paper
There's a reason that most electric bassists use paper speakers – it sounds warm! Memphis Audio uses a coated paper cone with a double-stitched butyl surround to build a sub that creates classic bass tone while still standing up to the power demands of today's bass-heavy music. The 4-ohm impedance works great when you're bridging an amp or putting together a multi-sub setup.
Product highlights:
- 8" 4-ohm subwoofer
- treated paper cone with double-stitched butyl surround
- power handling: 200 watts RMS
- peak power handling: 400 watts
- sensitivity: 84 dB
- top-mount depth: 3-11/16"
- grille not included
- warranty: 1 year
- MFR # 15-PRX8S4
What's in the box:
Memphis Audio 15-PRX8S4 owner's manual
- One 8" Single voice coil woofer
- Removable rubber mounting ring (installed)
- Warranty information
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Featured video:
Customer reviews for Memphis Audio 15-PRX8S4
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Memphis Audio 15-PRX8S4
Features & specs
Features and Specs | ||
---|---|---|
Size | 8 -inch | |
Impedance (Ohms) | 4 | |
Cone Material | Treated Paper | |
Surround Material | Butyl Rubber | |
Port diameter (inches) | 2 | |
Port length (inches) | 5.75 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
84 dB at 1 watt | |
Frequency Response | --- | |
Max RMS Power Handling | 200 | |
Peak Power Handling (Watts) | 400 | |
Top Mount Depth (inches) | 3 11/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 6 15/16 | |
Frame Width | 8.84 | |
Frame Length | 8.84 | |
Vas (liters) | 0 | |
Fs (Hz) | 0 | |
Qts | 0 | |
Xmax (millimeters) | 0 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.45 | |
Minimum Sealed Box Volume (cubic feet) | 0.35 | |
Maximum Sealed Box Volume (cubic feet) | 0.54 | |
Ideal Ported Box Volume (cubic feet) | 0.7 | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Memphis Audio recommends a sealed enclosure volume of 0.45 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Memphis Audio recommends a ported enclosure volume of 0.7 ft³ with a 2" diameter x 5-3/4" long port, yielding a tuning frequency of 43 Hz.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Works Great! Had to remove rubber ring on outside & use OEM rubber, it then fit in OEM box & sounds great.
Thomas from Northern Cambria, PA