About the Memphis Audio 15-SRX6C
The affordable component set
Memphis Audio supplies sleek grilles for custom installation
The affordable component set
With the Street Reference Series speakers, Memphis Audio has applied all of their know-how to an affordable audio solution that seriously satisfies. Feed this15-SRX6C component speaker system up to 50 watts RMS and enjoy a rich sound that far surpasses the factory speaker performance you've grown accustomed to.
Memphis Audio uses a treated paper cone for punchy mids and lows from the 6-1/2" woofer, while a separate Mylar tweeter hits you with crisp, worthy highs. Memphis also supplies an external crossover for optimal driver performance. Grilles are included for custom installation.
Product highlights:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers
- polypropylene woofer with polyurethane rubber surround
- Mylar dome tweeter
- 2-way external crossover
- handles up to 50 watts RMS (100 watts peak power)
- frequency response: 50-20,000 Hz
- sensitivity: 88 dB
- woofer mounting depth: 2-1/4"
- woofer grilles included
- warranty: 1 year
- MFR # 15-SRX6C
What's in the box:
Memphis Audio 15-SRX6C owner's manual
- 2 Woofers
- 2 Tweeters (with attached 6" speaker wire)
- 2 Crossovers
- 2 Woofer grilles
- Grille putty
- 2 Flush mount tweeter housings (with tweeters installed)
- Two 6-1/2' Woofer wires (quick slides on one end and tinned bare wire on the other)
- Twelve 1" Screws
- 12 Speed clips
- Four 1/2" Screws
- Warranty information
- Template
Featured video:
Customer reviews for Memphis Audio 15-SRX6C
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Memphis Audio 15-SRX6C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Polypropylene | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 50 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 2 1/4 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 5/16 | |
Mounting Height (Inches) | 0.26 | |
Frame Width | 6.26 | |
Frame Length | 6.26 |
Product Research
Features
Woofer Size Classification: Memphis Audio describes this woofer as a 6-1/2". Because it requires a larger cutout than a standard 6-1/2", we're including it with the 6-3/4" speakers. (It is actually slightly smaller than the typical 6-3/4".) Please enter you vehicle information to confirm fit in your vehicle.
Tweeter Mounting: The tweeters are shipped in the flush mount housings. Once installed, the tweeter will pivot slightly to optimize imaging.
Tweeter Dimensions:
Flush Mount | |
---|---|
Mounting Height | 0.3" |
Mounting Depth | 1" |
Frame Diameter | 2.4" |
Cutout Diameter | 2.1" |
Crossover: The crossover's inputs and outputs are screw terminals that will accept bare wire or spade connectors up to 0.31" wide.
Crossover Dimensions:
- Width: 2-9/16"
- Height: 1-3/8"
- Depth: 4-3/4"
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Very awesome product sounds great in my truck has the nice low rumble that I was looking for and the tweeters are just perfect for mounting them up high by the sealing ( by the seatbelts) sounds amazing!
Luke R. from La Vernia, TX