1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Helix E400

Esprit Series 4-channel car amplifier — 110 watts RMS x 4

Zoom
  • Helix E400

    Front

  • Helix E400

  • Helix E400

  • Helix E400

Crutchfield OMC logo
We don't check this item for fit or compatibility.
Item# 975E400
 

Review Summary

DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email   Chat
 
 
 
 
 

Our take on the Helix E400

by Buck Pomerantz
HELIX

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

A tube amplifier for your car

The Esprit Series E400 amplifier from Helix uses two triode vacuum tubes in its preamp stage to give your music the pleasing sound that only tubes can create, but with the reliability of a solid-state output section. This 4-channel amp delivers 110 watts RMS to each of your front and rear speakers, giving you the clean headroom you need to get truly dynamic performance from your system. You can use the E400 in 2-channel mode to run a pair of subs with up to 320 watts RMS each, or switch to 3-channel mode to run your front speakers and a single sub.

What vacuum tubes do for the sound

Many musicians and audiophiles will tell you that tube amplifiers sound better than solid-state designs. Tubes and transistors react differently to the intentional distortions in rock music, for example — transistors try to reproduce it exactly, while tubes tend to smooth out the rough edges while keeping all the details in clear focus. Music seems to sound more alive and "warmer" with tubes in the signal path, creating a more convincing illusion that the musicians are in the car with you. And the reassuring glow of the tubes, visible through a window on the amp's top, adds a nice touch as your friends check out your system.

Highlights:

  • 4-channel car amplifier
  • 110 watts RMS x 4 at 4 ohms (160 watts x 4 at 2 ohms)
  • 320 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • dual triode vacuum tube driver stage
  • Class AB design
  • separate front and rear variable low- and high-pass filters (40-250 Hz)
  • preamp and speaker-level inputs
  • speaker-level inputs require an optional adapter
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 25A x 3
  • 18-1/2"W x 2-5/16"H x 9-1/8"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
110 x 4
Peak Power Output (Watts x Channels)
Loading...
270 x 4
Power at 2 Ohms (Watts x Channels)
Loading...
160 x 4
Bridged Power (Watts x Channels)
Loading...
320 x 2
Minimum Impedance Bridged
Loading...
4
Minimum Impedance Unbridged
Loading...
2
Best Frequency Response
Loading...
20-20k Hz
THD at Rated RMS Power
Loading...
0.05%
Signal to Noise Ratio
Loading...
90 dB
Input Voltage
Loading...
---
Features
Amplifier Class
Loading...
AB
Low-Pass Crossover Frequency
Loading...
40-250 Hz
Low-Pass Slope (dB/octave)
Loading...
N/A
High-Pass Crossover Frequency
Loading...
40-250 Hz
High-Pass Slope (dB/octave)
Loading...
N/A
Bass Boost
Loading...
No
Bass Boost Frequency
Loading...
N/A
Fan Cooled
Loading...
No
Fuse Rating
Loading...
75
Speaker Level Inputs
Loading...
RCA
Preamp Outputs
Loading...
No
Width (inches)
Loading...
18-1/2
Height (inches)
Loading...
2-5/16
Depth (inches)
Loading...
9-1/8
Parts Warranty
Loading...
2 Years
Labor Warranty
Loading...
2 Years
Product Research
What's in the box?

Download owner's manual

  • Four-channel amplifier
  • Six 25 amp ATO fuses (3 installed/3 spare)
  • Four 3/4" Self-tapping screws
  • 5mm Allen wrench
  • 2.5mm Allen wrench
  • Instruction manual (German/ English)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

Tube Preamp Stage: Two dual triode vacuum tubes are used in the preamp stage for warm and powerful sound reproduction.

Speaker-level Input: High-level inputs can be used when the source device doesn't have preamp-level outputs. The same RCA inputs on the amp are used for either speaker-level or line-level connections. When a speaker-level signal is used, speaker wire-to-RCA adapters are needed (item number 20609ZISL or 136XDCLR2S, sold separately) and the Input Select switches should be set to high.

2-Ohm Stable: In stereo mode (powering four speakers) the amplifier is stable down to 2-ohms. The 2-ohm output is 160 Watts RMS x 4 channels.

Bridgeable: The E 400 can be bridged to two channels, outputting 320 Watts x 2-channels into 4 ohms. You can also wire the E 400 in three channel mode, bridging half the amp and running the other half in stereo (110 Watts RMS x 2 channels plus 320 Watts x 1-channel).

Protection Circuitry: The E 400 offers four protection circuits: short circuit (or too low an impedance on the outputs), thermal overload, over voltage, and under voltage.

Controls

4-Channel: The amplifier is divided into two sections, channels 1/2 and channels 3/4. Each pair of channels has independent gain, crossover, and input level controls.

Crossover: The built-in crossovers have three position switches to select the crossover operation as high-pass, full-range, or low-pass. The crossover points are continuously variable from 40 to 250 Hz.

Input Select: The input level control is switchable; set to Low when connecting line level input signals and to High when connecting speaker level signals.

Gain: The rotary gain controls are continuously variable from 0.4 volts to 6.0 volts to match the source signal.

Connections

Power: The power and ground inputs are set-screw terminals; they will accept bare wire up to 2-gauge (HELIX recommends 4-gauge minimum) and are tightened/loosened with the included 5mm Allen wrench.

Remote: The remote turn-on input is a set screw terminal; it will accept bare wire up to 8-gauge and is tightened/loosened with the included 2.5mm Allen wrench.

Speaker Outputs: The speakers connect to four pair of set-screw terminals; they accept bare wire up to 8-gauge and are tightened/loosened with the included 2.5mm Allen wrench.

Signal Input: Two pair of stereo RCA jacks connect to the output signal from the head unit. The RCA jacks will accept line level signals, or speaker level signals (requires speaker wire to RCA adapters, sold separately).

Fuse: The amp is protected by three 25-amp ATO-type fuses.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Helix E400 Reviews

Average Customer Review:

1 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Too Bad (For You) It's been Discontinued

Written By JayBlay, Windsor Mill, MD on Monday, September 16, 2013
Crutchfield Customer Review (What's this?)
 
I have been kinda conditioned to expect some certificate certifying what an amp's true power is, so I was surprised when I peeked into the box to see that the only paperwork was a set of instructions. This amp...I have no idea what it's true power rating is, but I can tell you that the 110x4 that is listed on the box is extremely conservative. It is pushing two sets of Alpine SPR-60C's to their limits (although I suspect that is a partial function of trying to get the tuning right). In any event, there is something sexy about being able to say that I have a vacuum tube amplifier in the car and I guess I got the very last brand new e400 that Crutchfield had available. It is definitely a very clean and powerful amp and I know I couldn't have done any better given the sale price I got it for at the time of purchase. It is a shame that Helix opted to get rid of their middle of the line offering and also a shame that their competition series does not incorporate vacuum tubes.

I'm having a Punch p300x2 (also purchased from Crutchfield) in a few days to power an 8" R-type sub and I cannot wait to hear how all of the speakers play together.
Pros:
Clean and powerful, exclusive, cool factor, great price.
Cons:
If you could call it a "con," the amp is way more powerful than the stats let on.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 

Add accessories for the Helix E400

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

T-Spec 4PK Installation Kit 4-gauge amplifier wiring kit — includes speaker wire
2 people say
Your Price: $89.99
Add to Cart
Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
9 people say
Your Price: $159.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
6 people say
Your Price: $114.99
Add to Cart
EFX 4-gauge Amplifier Wiring Kit Power and signal connections for your new amp
71 people say
Your Price: $79.99
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
17 people say
Your Price: $1.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
9 people say
Your Price: $0.69
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
37 people say
Your Price: $0.39
Add to Cart
JL Audio XD-CLRAIC2-SW 2-channel speaker output converter (bare speaker wires to male RCAs)
11 people say
Your Price: $9.99
Add to Cart
Kicker KISL 2-channel speaker wire adapter (bare-wire connector to RCAs)
6 people say
Your Price: $12.99
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (20-foot)
14 people say
Your Price: $20.99
Add to Cart
5 people say
Your Price: $29.99
Add to Cart
EFX CAFH Fuse Holder In-line AGU fuse holder accepts 4/8-gauge wire
1 person says
Your Price: $12.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable
21 people say
Your Price: $10.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
4 people say
Your Price: $79.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
42 people say
Your Price: $24.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
25 people say
Your Price: $12.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
10 people say
Your Price: $19.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
12 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
64 people say
Your Price: $9.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
7 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
1 person says
Your Price: $29.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $84.99
Add to Cart
4 Year Protection Plan
4 Year Protection Plan
Your Price: $112.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Helix E400, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_975E400/Helix-E400.html ).

Get live, personalized service from an expert

Crutchfield Advisor: Hi there.

Crutchfield Advisor: We're happy to answer questions or provide additional info about this item.

Advisors also available at 1-888-600-3963