About the MATCH MS 62C-VW.1
Component sound
Component sound
When it comes to vehicle-specific speakers, VW owners have a nice selection to choose from, but MATCH by Audiotec Fischer stands out from the rest by offering a component system with significant power handling. If you've been intimidated by the idea of altering your VW with aftermarket speakers, don't be. MATCH's installation is hassle-free, thanks to 6-3/4" woofers designed to fit the original mounting position in your doors and 1" silk dome tweeters made for direct-fit installation in your VW's factory tweeter housing.
MATCH's crossover provides a reference curve for easy setup.
German quality
What better for your German-engineered car than a German-engineered sound system? MATCH's handcrafted speaker design is precision-built using the latest technology and materials. To minimize distortion, the woofer uses a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
Fine tuning
MATCH built the compact crossover with a frequency curve and filtering designed specifically for your VW. MATCH has also given you plenty of leeway in the power department, as these components handle up to 80 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original BMW radio, but with an external amp, they'll perform on a completely new level.
Installation note: To ensure that this direct-fit model is compatible with your VW, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; the factory grilles should be suitable for most applications.
Highlights:
- component system includes two woofers, two 1" tweeters, and two crossovers
- 6-3/4" coated paper woofer with rubber surround
- 1" silk dome tweeter
- designed specifically for VW Golf VI/VII, Scirocco, Polo Golf VI/VII, Scirocco, or Polo models
- works with factory radio, aftermarket receiver, or outboard amp
- 2-80 watts RMS power range (160 watts peak)
- frequency response: 40-25,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- grilles not included
- warranty: 2 years
- MFR # MS62C-VW
What's in the box:
MATCH MS 62C-VW.1 owner's manual
- 2 MS 6B-VW.1 Woofers
- 2 Woofer mounting brackets
- 2 MS 1T-VW.1 Tweeters (with 30" wires attached terminated with bullet connectors)
- 2 Crossovers
- Two 32" Lengths of tweeter wire (each has spade terminals on one end and bullet connectors on the other)
- Two 32" Lengths of woofer wire (each has spade terminals on one end and quick slides on the other)
- 2 Volkswagen speaker harness adapters (connect factory wiring to the crossover input)
- Twelve 1" Self-tapping screws
- 12 Speed clips
- Instructions (English/ German)
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for MATCH MS 62C-VW.1
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MATCH MS 62C-VW.1
Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Coated Paper | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 25k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 160 | |
Top-mount Depth (Inches) | 1 7/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 5/16 | |
Mounting Height (Inches) | 1.367 | |
Frame Width | 6.675 | |
Frame Length | 6.675 |
Product Research
Features
Mounting: The midrange included with the MS 62C-VW.1 system mounts in place of the factory midrange. In most installations the factory midrange is riveted in place, so the rivets must be drilled out. New screw holes must be drilled to mount the included bracket, to which the new midrange is then mounted. Typically the new tweeters are glued into the factory tweeter housing.
Wiring: The system includes wire for the woofers, tweeters, and crossover inputs. The two 32" woofer wires have spade connectors on the crossover end and female quick slides that plug onto the woofer terminals. The two 32" tweeter wires have spade connectors on the crossover end and bullet connectors on the tweeter end (the 30" wires attached to the tweeters also have bullet connectors attached). The two 11" crossover input wires have spade connectors on the crossover end and Volkswagen harnesses on the input end, that plug into the factory wiring.
Crossovers: The crossovers are separate components with screw terminal inputs and outputs. The screw terminals will accept bare wire or spade connectors up to 1/4" wide; the included wire has spade connectors attached. The crossover dimensions are:
- Width: 2-3/8"
- Height: 1-3/16"
- Depth: 3-5/16"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...