About the HELIX P 52C
A closer look
HELIX's eye for design gives you the option of putting these stylish external crossover systems on display.
A closer look
HELIX is serious when it comes to audio technology. Under their philosophy of integrated system principles, Helix engineers have eliminated all the weak links in their P 52C component speaker system. The 5-1/4" woofer features a cone made with a highly responsive compound of paper and glass fiber that achieves near-perfect dampening, delivering precise performance even at higher volume levels. And the 1" hand-coated silk dome tweeter broadcasts high frequencies effectively for a balanced, natural sound in your vehicle.
Superb sound, excellent power handling
Low-induction metal film resistors, zero-distortion air coils, minimum loss Audiotec foil capacitors — they're more than a mouthful. These high-grade parts give the P 52C's crossover network the ability to seamlessly separate highs and lows for realistic sound. With power handling up to 80 watts RMS, you'll want to power these speakers with an outboard amp to maximize their performance.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Highlights:
- component system includes two woofers, two tweeters, and two external crossovers
- 5-1/4" glass fiber-paper compound woofer cone
- 1" hand-coated silk dome tweeter
- external crossovers with 3-position tweeter level adjustment
- power range: 5-80 watts RMS (160 watts peak power)
- frequency response: 60-25000 Hz
- impedance: 4 ohms
- sensitivity: 89 dB
- woofer top-mount depth: 2-1/2"
- grilles included
- warranty: 2 years
- MFR # P52C
What's in the box:
- Two woofers
- 2 Metal grilles
- 2 Plastic grille frames
- 2 Tweeters
- 2 Flush-mount tweeter housings (installed)
- 2 Angled surface-mount tweeter housings
- 2 Metal flush-mount clamps
- 2 Crossovers
- Twenty 1" Self-tapping screws
- Two M4x30mm Flat head machine screws
- 2 Adhesive backed pads
- Woofer template
Customer reviews for HELIX P 52C
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the HELIX P 52C
Features & specs
General | ||
---|---|---|
Speaker Size | 5 1/4 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Glass Fiber-Paper | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 89 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 60 - 25k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 160 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 7/16 | |
Mounting Height (Inches) | 0.21 | |
Frame Width | 5.07 | |
Frame Length | 5.07 |
Product Research
Features
Tweeter Mounting Options: Using the supplied housings the tweeters can be flush mounted or surface mounted at an angle. Once mounted in the appropriate housing, the tweeters have these dimensions:
Flush Mount | Angled Surface Mount | |
---|---|---|
Mounting Depth | 1.0" | screw depth |
Mounting Height | 0.40" | 1.18" |
Cutout Diameter | 1.945" | N/A |
Frame Diameter | 2.280" | 1.82" x 2.09" |
Crossover Connections: The passive crossovers feature screw terminal inputs and outputs; they will accommodate bare wire or spade connectors up to 0.3" wide.
Tweeter Level: There are three tweeter outputs on each crossover, giving you three output level options, +2 dB, 0 dB, or -2 dB.
Mounting: Each crossover can be mounted using the included screws through four holes in the base.
Dimensions:
- Length: 4.020"
- Width: 4.525"
- Height: 1.375"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...