Skip Navigation

MATCH PP10E-D Compact Sub

Vented enclosure with two 10" subwoofers

1 Review | 1 question - 1 answer

Overview

Our take on the MATCH PP10E-D Compact Sub

Audiotec Fischer makes the MATCH PP10E-D subwoofer to deliver great bass when you upgrade your vehicle's factory sound system with a MATCH PP82DSP processor. The PP10E-D rocks with twin 10" subs in a vented enclosure that's compact enough to fit in most vehicles, yet efficient enough to broadcast some impressive bass.

Bass made for the Plug and Play system

Audiotec Fischer makes the MATCH PP10E-D subwoofer to deliver great bass when you upgrade your vehicle's factory sound system with a MATCH PP82DSP processor. The PP10E-D rocks with twin 10" subs in a vented enclosure that's compact enough to fit in most vehicles, yet efficient enough to broadcast some impressive bass.

Proprietary cable included

The PP10E-10 comes with a 16.5-foot PP-SC4 cable that connects the sub to your PP82DSP processor. The cable allows the processor's 4-channel amp to power each voice coil in the enclosure's two DVC subs.

What's in the Box:

  • Ported hatchback style enclosure with two subwoofers installed
  • 16-1/2' PP-SC 48 cable

Product Highlights:

  • subwoofer for MATCH plug and Play system upgrade
  • two 10" DVC 2-ohm subwoofers in vented enclosure
  • vented enclosure
  • includes 16.5-foot cable for connection to PP82DSP processor
  • power handling: up to 300 watts RMS (600 watts peak power)
  • sensitivity: 91 dB
  • 16-1/4"W x 14-7/8"H x 16-3/8"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

MATCH PP10E-D Compact Sub Reviews

Average Customer Review:

1 Review

Makes a very clean install with Match DSP

Written by: Lyn from Ohio on December 21, 2015

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

Considering a Subwoofer and an Amp Can be quite a Challenge. This Sub Woofer Plugs directly into the Match PP 82DSP amp using Molex plugs which make the install simple and doesn't need to have an additional amp to get some awesome sound from The DSP. No wire cutting anywhere. I bought the unit on sale so it was a good value for my system.

Pros: Molex Plug and Play.

Cons: Molex Plug and Play kind of a hassle if one were to hookup to a Mono amp if proper instructions aren't available.

Details

Hands-on research

What's in the box?

  • Ported hatchback style enclosure with two subwoofers installed
  • 16-1/2' PP-SC 48 cable

Product Research

Features

Overview: The PP 10E-D subwoofer is designed as an easy addition to the Helix PP 82DSP plug and play digital signal processor/amplifier. The included PP-SC 48 cable connects the proprietary input terminal on the PP 10E-D to the subwoofer port on the PP 82DSP. The PP 82DSP powers the PP 10E-D subwoofer and is required for its use.

Impedance: Both subwoofers have dual 2Ω voice coils. Each of the four voice coils is wired separately to the proprietary Molex input terminal.

Dimensions:

  • Width: 15-1/2" (16-1/4" including the woofer grilles)
  •  Height: 14-7/8"
  • Depth:
    • 16-3/8" at the bottom
    • 11-3/4" at the top

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

The pp10e-d will work with the pp52dsp if the dsp has the 8 pin subwoofer out. The dsp software will have to be configured so the subwoofer will work per manual for the PP52DSP I like mine. Don't expect to be earth shaking but, it makes the whole system sound much better. [ Lyndon  Apr 18, 2016 ]
Library