About the HELIX URC 2A
Make adjustments to your HELIX DSP from the front seat, without a computer
Make adjustments to your HELIX DSP from the front seat, without a computer
If you use a HELIX DSP processor in your system, the URC 2A remote control can control several functions of your processor from the front seat of your vehicle, without having to plug in a computer. You can adjust the main and subwoofer volumes, switch between your digital and analog sources, and even quickly switch back and forth between two previously saved processor setups. You can re-configure some of the URC 2A's functions using your HELIX DSP's DSP PC-Tool Software.
Controlling a digital source
If you're using the digital input on your HELIX DSP processor, the signal from your device contains no volume level data, so you'll need this remote in order to control the volume.
Product highlights:
- wired remote control for a HELIX DSP processor
- works with HELIX, MATCH, and BRAX DSP devices
- 16.25-foot cable
- controls include:
- main and subwoofer volume
- switch between digital and analog inputs
- switch between stored DSP settings Setup 1 and Setup 2
- bypass all processing
- Fun Control: high-, mid-, and low-frequency shelf filtering
- warranty: 1 year
- MFR # URC 2A
What's in the box:
- Wired remote control module
Customer reviews for HELIX URC 2A
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the HELIX URC 2A
Product Research
Features
Functionality: The functions of the two dials and one switch vary based on what DSP is installed, and can be changed using Audiotec Fischer's DSP PC-Tool software:
- PP 52DSP:
- Control I (dial): auxiliary input volume, master volume, or Fun Control (similar to a variable loudness control)
- Control II (dial): subwoofer volume, auxiliary input volume, or Fun Control
- Mode (two position switch): bypass EQ (compare the system with DSP vs. without DSP), Aux mode (on/off), or Setup Switch (switch between two DSP profiles loaded in memory)
- PP 82DSP:
- Control I: auxiliary input volume or master volume
- Control II: subwoofer volume or auxiliary input volume
- Mode: bypass EQ (compare the system with DSP vs. without DSP), Aux mode (on/off), Setup Switch (switch between two DSP profiles loaded in memory), or optical input mode (on/off)
- Helix DSP:
- Control I: master volume, optical input volume, Track analog signal (dial has no function, optical input volume is controlled by the incoming analog signal), or off
- Control II: subwoofer volume, off
- Mode: optical input mode (on/off), Setup Switch
Connection: The attached cable has an eight pin connector that plugs into the DSP.
Dimensions:
- Width: 1.542"
- Height: 0.95"
- Length: 4.32"
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...