Chat
Contact us
Close contact box
Connect ID #
154 527 387 4
Connect ID #
154 527 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Bazooka F.A.S.T Package Connect a powered Bazooka Bass Tube® to your factory radio

Item # 700FASTBAZ

This F.A.S.T. combination from Bazooka includes everything you need to hook up a 100-watt amplified Bass Tube to...

This F.A.S.T. combination from Bazooka includes everything you need to hook up a 100-watt amplified Bass Tube to...

5 questions - 7 answers

Item # 700FASTBAZ

Low stock
$39.98

About the Bazooka F.A.S.T Package

Dominic DeVito
This F.A.S.T. combination from Bazooka includes everything you need to hook up a 100-watt amplified Bass Tube to the factory radio in your vehicle. Bazooka's Factory Audio System T-harness (F.A.S.T.) system uses Posi-Tap connectors and simple, reliable plugs to get the signal from your factory radio to the Bass Tube — no splicing or complicated wiring diagrams needed.

This F.A.S.T. combination from Bazooka includes everything you need to hook up a 100-watt amplified Bass Tube to the factory radio in your vehicle. Bazooka's Factory Audio System T-harness (F.A.S.T.) system uses Posi-Tap connectors and simple, reliable plugs to get the signal from your factory radio to the Bass Tube — no splicing or complicated wiring diagrams needed.

The F.A.S.T.-9999 universal harness taps into into your factory radio using Posi-Tap connectors — no cutting or stripping required. Hook the other end of the universal harness up to the 16-foot long F.A.S.T.-BTAH extension cable, which you've connected to the powered Bass Tube in the rear of your vehicle. You're ready to bring a new dimension to your music. Warranty: 30 days.

Note: This package works with 50-watt and 100-watt Bazooka tubes. You can also use this package to install a more powerful Bazooka tube, but you'll need a power cable and fuse to connect your Bazooka to your battery.

READ LESS

What's in the box:

  • The Bazooka F.A.S.T. Combination consists of two separately packaged items: the F.A.S.T.9999 universal harness and the F.A.S.T.-BTAH extension cable:
  • The F.A.S.T.9999 universal harness package contains:
  • 10.75" Bazooka universal harness with a male 6-pin molex plug on one end and 6 posi-tap connectors on the other end
  • The F.A.S.T.-BTAH extension cable package includes:
  • 15.5' Bazooka universal harness extension with a 6-pin Molex plug and two male RCA plugs on one end and a 14-pin Molex plug on the other end

Customer reviews for Bazooka F.A.S.T Package

Loading reviews...

Average review:

5.0 out of 5 stars
8 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Bazooka F.A.S.T Package

Mark G.

Product Research

Features

Overview: The Bazooka F.A.S.T. 9999 (Factory Audio System T-harness) universal harness, when used with the Bazooka BTAH extension cable (both included in this package), allows quick and easy installation of your amplified Bazooka tube with your factory or aftermarket radio. All the necessary wiring for the amplified Bazooka (100 watt or 50 watt versions) is included.

Compatibility: The FAST-9999 harness/BTAH extension combination package is compatible with most factory and aftermarket head units and with most 100 watt and 50 watt amplified Bazooka Tubes, including (but not limited to):

  • BTA6100, BTA8100, BTA10100
  • MBTA8100, MBTA10100
  • BTA850FH, BTA8100FHC, BTA10100FHC (this wiring package is included with these models)

Connections: The FAST-9999 universal harness has a 6-pin Molex plug on one side that connects to one end of the FAST-BTAH extension cable; on the other side are 6 Posi-Tap connectors that hardwire to your radio's harness (the six wires include left and right speaker-level audio positive and negative, switched power, and turn-on trigger). Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on the end. Just insert the wire to be tapped into the cap and hand tighten the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. The 14-pin Molex plug end of the FAST-BTAH extension cable plugs directly into the Bazooka bass tube. The ground wire extends 34" from the 14-pin Molex plug. The Bazooka tube's line-level input can be utilized with the male RCA plugs at the radio end of the extension cable (for use with aftermarket radios having preamp outputs).

Loading accessories...

Customer Q&A

5 questions already asked

Q
if i use a 250 watt bazooka tube can i use a 100 watt wiring harness to wire it?
bryden  Dec 04, 2023
1 answer
A
Greetings Bryden. Thank you for your question. It is not recommended for Bazooka tubes over 100 watts. My answer is no.
hogan  Dec 04, 2023 (Staff)
Q
So if I get this, do I still need the 10 gauge amp wiring kit too?
jennifer  Apr 13, 2021
2 answers
A
No. Since it's a digital amp, the current draw is less. I used just the FAST harness and the 10" sub hits pretty darn hard in the trunk of a Kia Rio and then sounds even better now in my sons Kia Sportage! Good luck.
john  Apr 15, 2021
A
No you won't. The FAST 9999 harness (small harness) connects directly to the back of your stereo and then you connect it to the big harness that runs all the way back to your trunk area. Very easy to do, and no need to buy an additional amp wiring kit. That's all you need. The Crutchfield service techs can tell you exactly what wires you connect behind the stereo. They are great, and even available on weekends. Hope this helps!
james gino  Apr 13, 2021
Q
I'm looking at adding this with my 2019 edge SE with basic factory unit. Will a diagram come included so I can know which wires to connect off factory unit?
dotta  Feb 24, 2020
1 answer
A
A diagram is included but it is not specified to your vehicle. Most radios are the same when it comes to wiring harnesses. Just check YouTube if you get stumped on your vehicle.
dominique  Feb 24, 2020
Q
so even though i get this adapter i still have to run a seperate power wire from the cars battery to the unit?
paul  Mar 11, 2016
2 answers
A
I didn't run a separate power wire -- I just tapped into the switched 12V behind the radio. Not the cleanest power source -- but I've never blown a fuse, either.
scott  Mar 11, 2016
A
I used the switched power behind the radio. Worked great.
scott  Mar 11, 2016
Q
will this product work with aftermarket head unit?
david  Sep 02, 2014
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Sep 03, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound