About the JVC RX-7010V
Outfit your system for spine-tingling digital home theater with this versatile, easy-to-use receiver from JVC! The RX-7010V offers built-in Dolby® Digital, DTS®, and Dolby Pro Logic decoding, plenty of digital and analog inputs for all your sources, plus a beefy 100 watts x 5 channels for pure, room-filling sound. Best of all, the '7010V comes with a host of convenient extras that make operation a breeze.
JVC's AV CompuLink simplifies playback with compatible JVC DVD players, VCRs, TVs and audio components. For example, just pop in a DVD; your system automatically turns on, switches to the correct inputs on your receiver and TV, and begins playback at your preferred settings! The remote features a handy (1-way) LCD for confirming your selections, and is pre-programmed to operate most brands of video gear. Five DAP (Digital Acoustics Processor) soundfields let you add extra ambience to your stereo sources. High-rigidity Z-chassis construction cuts down vibration and resonance for cleaner sound.
Details:
- Dolby Digital, DTS, and Dolby Pro Logic decoding
- digital inputs: 3 optical, 1 coaxial
- 3 audio, 3 A/V (including 3 S-video and one 5.1-channel) inputs
- optical digital output
- 100 watts x 2 (stereo) into 8 ohms (40-20,000 Hz) at 0.8% THD or 100 x 5 in surround mode
- Z-chassis construction
- 5 DAP modes
- multibrand-for-video 1-way LCD remote
- preamp-level subwoofer output
- banana plug-compatible outputs for main left and right, center, and surround speakers
- 30 FM/15 AM presets
- AV CompuLink
- 17-3/16"W x 5-13/16"H x 18"D
- warranty: 2 years
What's in the box:
- AM/FM/Dolby Digital/DTS receiver
- RM-SRX7010J wireless remote
- 2 "AA" batteries
- AM Loop antenna
- FM wire antenna
- Instructions
- Product Safety Registration Card/Questionnaire
- Important Product Safety Instructions
Customer reviews for JVC RX-7010V
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JVC RX-7010V
Features & specs
Product Research
Features
Remote Control
Inputs and Outputs
Dolby Digital, Dolby Pro Logic and DTS Decoding: This receiver has a built-in decoder for Dolby Digital, Dolby Pro Logic and DTS playback.
5.1 Channel Input: This receiver is equipped with a 5.1 channel input for compatibility with future 5.1 channel decoders.
Surround Fields:
- Dolby Digital
- DTS
- Dolby Pro Logic
- Theater (DAP mode): Reproduces the sound field of a theater
- Live Club (DAP mode): Reproduces the feeling of a live music club with a low ceiling
- Dance Club (DAP mode): Emphasizes the low frequencies
- Hall (DAP mode): Reproduces clear vocals and the feeling of a concert hall
- Pavilion (DAP mode): Reproduces the spacious feeling of a pavilion with a high ceiling
Bass Management:
- Subwoofer: You can select YES or NO. If YES is selected, you can adjust the level of the subwoofer from -10dB to +10dB in 1dB increments.
- Front Speakers: You can select LARGE or SMALL (if the subwoofer is set to NO, you can only select LARGE front speakers)
- Center Speaker: You can select LARGE, SMALL, or NONE (if the front speakers are set to SMALL, you cannot select LARGE for the center speaker)
- Rear Speakers: You can select LARGE, SMALL, or NONE (if the front speakers are set to SMALL, you cannot select LARGE for the rear speakers)
- Center Delay: Allows you to adjust the center delay setting from 0 to 5 msec in 1 msec increments
- Rear Delay: Allows you to adjust the rear delay setting from 0 to 15 msec in 1 msec increments
- Crossover: The channels set to SMALL are filtered with a selectable high-pass crossover. You can select a crossover point of 80Hz, 100Hz, or 120Hz.
- LFE Attenuator: When the bass is distorted, you can lower LFE bass output by 10dB
- Dynamic Range Compression: Allows you to select OFF, MID or MAX. The MID setting compresses the dynamic range very little, whereas the MAX setting offers full dynamic range compression. Note: Dynamic Range Compression mode is only available when specially encoded Dolby Digital signals are played.
Test Tone: A test tone feature is available to help with the process of matching the output level of the left surround, right surround and center channels to the front left and right channel level.
Bass Boost: A 3dB boost may be added to the output of the left and right main channels with the touch of a single button. The boost is applied so the overall tonal balance of the system is maintained.
Auto Memory: This feature assigns and stores different sound settings for each source. You can store the bass boost, tone adjustment, input attenuator mode, subwoofer output level, balance, DSP mode, and DVD MULTI playback mode settings.
Attenuator: You can attenuate an analog input signal if it is too high and causes distortion.
Compu Link: This unit has AV Compu Link and Compu Link-4 Synchro remote control systems.
Digital Input Registration: When you use any of the digital inputs, you must register which source is connected to which digital input. This only needs to be done one time, and afterwards, the unit will automatically be able to select the proper source in both digital and analog mode.
Sleep Timer: This unit is equipped with a sleep timer that will automatically turn the unit off. The sleep timer can be adjusted from 10 to 90 minutes in 10 minute increments.
Wireless Remote: The remote controls JVC audio/video components (CD players, CD recorders, Turntables, Cassette decks, VCRs, DVD players, and TVs) and it is pre-coded to control most popular brands of TVs, DBS receivers, cable boxes, VCRs, and DVD players. A non-illuminated LCD screen at the top of the remote displays the current source.
Front Panel:
- Phones: Standard gold-plated headphone jack
Rear Panel:
- AM Input: Spring clips
- FM Input: Slip-on F-Type connector
- 5.1 Channel Input: RCA inputs for rear right, rear left, center and subwoofer. These inputs are used along with the DVD input as a 5.1 channel input.
- Phono Input: RCA stereo audio
- CD Input: RCA stereo audio
- Tape/CD-R Input/Output: RCA stereo audio
- VCR Input/Output: Stereo RCA audio, composite video and S-video
- TV Sound/DBS Input: Stereo RCA audio, composite video, and S-video
- DVD Input: Stereo RCA audio, composite video, and S-video
- Monitor Out: Composite video and S-video outputs to connect to a TV/monitor
- Subwoofer Output: Mono RCA preamp output
- Digital 1 (DVD) Input: Standard coax digital input
- Digital 2 (CD) Input: Standard Toslink input with cover
- Digital 3 (TV) Input: Standard Toslink input with cover
- Digital 4 (CD-R) Input: Standard Toslink input with cover
- Digital Output: Standard Toslink output with cover
- Compu Link-4 (Synchro): 2 female mini-jacks for use with compatible JVC components
- AV Compu Link: 2 female mini-jacks for use with compatible JVC components
- Front 1, Surround and Center Speaker Outputs: Binding post outputs for Front 1 left, Front 1 right, surround left, surround right, and center speakers (posts are not 5-way binding posts, because each post has a plastic collar that prevents use with spade lugs and the posts are too far apart to use dual banana plugs)
- Front 2 Speaker Outputs: Spring clip outputs for Front 2 left and Front 2 right speakers
The JVC RX-7010V replaces these items
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...