Specials Outlet
Infinity Kappa 60.5cs 6-1/2" Component Speaker System

Install a Kappa component speaker system in your vehicle and enter the breathtaking world of high-fidelity sound. Ceramic Metal Matrix Diaphragm (C.M.M.D.) cones were first developed for Infinity's award-winning Prelude MTS home speaker system. They are constructed by bonding an aluminum cone to layers of ceramic, forming a driver that is lightweight, rugged, and extremely responsive.

Unlike other speakers, the high-roll rubber surround on the 60.5cs woofer is attached to the bottom of the Ceramic Metal Matrix Diaphragm (C.M.M.D.) cone. The result is more cone area for incredible depth and fullness in the low frequency spectrum. The cone is lighter than previous models too, for greater midrange sensitivity.

Angle the highly-acclaimed C.M.M.D. tweeter in flush-mount mode for superb stereo imaging. The 3,500 Hz crossover network (18 dB/octave high-pass, 18 dB/octave low-pass) channels signals to the appropriate drivers for seamless output.

Get more info on this product

Details:

  • Ceramic Metal Matrix Diaphragm Plus One woofer cone
  • 1" C.M.M.D. dome tweeter can be flush-, surface-, or angle-mounted
  • hi-roll rubber surround
  • 2-way crossovers (high-pass/low-pass at 3500 Hz, 18 dB/octave)
  • frequency response 45-21,000 Hz
  • power range 2-90 watts RMS
  • peak power handling 270 watts
  • sensitivity 90 dB
  • top-mount depth 2-3/16"
  • 3-year warranty
  • Want more peace of mind? Extended Service Plans Available

Top of page

Infinity Kappa 60.5cs

6-1/2" Component Speaker System

Item #108K605CS
DISCONTINUED
Item Discontinued

Contact us for advice

Recommended Accessories

Dynamat
Dynamat
Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
Baffles
Baffles
Keep your speakers clean and dry. They compress to fit behind your speakers.
More Accessories

What's in the box?

Download owner's manual

  • 2 Woofers
  • 2 Grilles
  • 2 Grille rings
  • 2 Crossovers
  • 2 Tweeters (each tweeter has attached 10" speaker leads)
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Plastic GM/Chrysler adapter brackets
  • 2 Metal 4-hole 6-1/2" adapter rings
  • 2 Metal multi-hole 6-3/4" adapter rings
  • Two 0.205" female quick-slides
  • Two 0.110" female quick-slides
  • Eight 1" self-tapping screws
  • Four 5/8" self-tapping screws
  • Eight 1/2" self-tapping screws
  • Four 7/16" self-tapping screws
  • 8 Machine screws
  • 2 Nuts
  • 4 Clip washers
  • 8 Speed clips
  • Instructions
  • Warranty/registration card