Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Woofers: The woofers are made of Highly Oriented Polyolefine (H.O.P.) plus aramid fiber. Using high-tech fibers aligned under extreme pressure, Sony's exclusive H.O.P. is lighter and stronger than polypropylene. The result is greater linearity, smoother response, and better sound.

Tweeters: The tweeters are 29/32" Tetron soft domes and can be flush mounted, surface mounted using an angled bracket, or surface mounted using a flat bracket.

Tweeter Mounting Dimensions:

Note: The threaded mounting posts can be used to hold the tweeters in place when using any of the mounting brackets, this adds approximately 1-1/2" to the required depth.

Crossovers: Each crossover has high-pass and low-pass outputs with a 5 kHz crossover point and 12 dB/octave slope. A jumper inside each crossover allows you to set the tweeter output level according to system requirements and personal preference; choose -3dB or 0dB. The inputs and outputs are screw terminals; they will accommodate bare wire or spade connectors up to 0.315" wide. There are two mounting holes in the base of each crossover.

Crossover Dimensions:

• Length: 4.02"
• Width: 2.55"
• Height: 1.04"