Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
General Overview: This is a
dual amplifier wiring kit that includes 4-gauge and 8-gauge power and ground
cables, two patch cables, a turn-on lead, power distribution blocks and
accessories required to install two amplifiers.
Power High Performance Series
Power/Ground Cable: The 4-gauge power and ground cable feature 1862 strands
of braided copper wire. The 8-gauge power and ground cable feature 735 strands
of braided copper wire. The power wires have clear jackets and the ground wires
have translucent black jackets.
In-line Fuse Holder: The
included in-line fuse holder attached to the power cable comes with a 60A
platinum-plated MAXI fuse. The fuse holder has a slot on the side where you
insert the MAXI fuse. You must first remove the RF logo badge on top of the fuse
holder. This allows you to loosen the set screws that hold the fuse in place.
Once the screws are loose, you can insert the MAXI fuse. After tightening the
screws, you can replace the logo badge. The fuse holder has an integrated base
with two holes, which allow you to mount the fuse holder. The fuse holder has
the following dimensions: L=3.374", W=1.991" (2.103" with the MAXI fuse
Power Distribution: The wiring
kit includes a platinum-plated fused two-position power distribution block and a
non-fused distribution block. The fused distribution block allows you to input
the 4-gauge power wire on one end, and output two 8-gauge power wires on the
other end. Two platinum-plated 30-amp AGU fuses are supplied. (Note: The
fuses should match the fuse rating of the connected amplifier) The supplied 4mm
Allen wrench can be used to tighten the set screws on the distribution block for
secure wire connections. The non-fused distribution block allows you to connect
the 8-gauge ground wire from each of the two amplifiers and the 4-gauge ground
wire leading to the amplifier grounding point.
Interconnect Cable: The
supplied RF Stealth interconnect cables feature twisted-pair conductors in a
side-by-side configuration. Each features a translucent clear jacket with
translucent red and black conductors, molded connectors (right-angle RCA
connectors on one end), and gold-plated tips.
Speaker Wire: The supplied
speaker wire is RF Standard 16-gauge high definition speaker cable made from
oxygen-free copper. The cable is made with 65 strands with a Super Twist design.
It has a clear jacket, and it's designed for sonic accuracy.