About the Rockford Fosgate PL1-110
Looks great and rocks your world! Meet your low-frequency soulmate — Rockford Fosgate's Punch Stage 1 PL1-110 subwoofer enclosure. This ported pounder comes out swinging, combining a tough-as-nails medium density fiberboard enclosure with a 10" Punch Stage 1 woofer for powerhouse bass.
The single 4-ohm voice coil woofer handles up to 150 watts RMS, with a molded polypropylene cone that really stands up to continuous abuse. The ported design helps to maximize output, and the sleek design really draws a crowd. Put this box in your trunk or hatchback, and let the low-frequency love flow!
Details:
- one Punch Stage 1 10" woofer with molded polypropylene cone
- ported 5/8" MDF enclosure
- binding post connectors
- frequency response: 20-200 Hz
- power range: 50-150 watts RMS
- sensitivity: 86 dB
- 17-1/4"W x 13-1/2"H x 16"D
- warranty: 1 year (woofer only)
What's in the box:
Rockford Fosgate PL1-110 owner's manual
- Vented subwoofer enclosure loaded with a single 10" Punch Stage 1 woofer
- Rockford Sticker
- Installation and Operation Instructions
Customer reviews for Rockford Fosgate PL1-110
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate PL1-110
Features & specs
| General | ||
|---|---|---|
| Woofer Size (inches) | 10 | |
| Speakers Per Box | --- | |
| Woofer Material | Poly | |
| Enclosure Type | Ported | |
| Color | Black | |
| Pieces in System | 1 | |
| Width (inches) | 13-3/8 | |
| Height (inches) | 17-5/16 | |
| Depth (inches) | 15-3/4 | |
| Connector Type | Binding Posts | |
| Frequency Response | 20-200 Hz | |
| Power Range (Watts RMS) | 150 | |
| Maximum Wattage | 300 | |
| Sensitivity | 86 dB | |
| Impedance | 4 ohms | |
| Parts Warranty | 1 Year/woofer only | |
| Labor Warranty | 1 Year/woofer only | |
Product Research
Features
Punch Stage 1 Woofer: The enclosure houses one 10" single voice coil, 4 ohm woofer. The speaker is a parabolic injection molded polypropylene cone-type woofer with a foam surround. The woofer features a 2" voice coil, steel basket, 30 ounce magnet and a linear spider.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of a front firing 10" woofer with a tuned front port. The speaker terminals are located on the left side of the box. The top, bottom, front and back of the box are covered in black carpet. The sides of the box have a black plastic end-cap with the Rockford Logo cut-out inside of it. The box has an internal volume of 1.05 cubic feet.
Tuned Ports: The enclosure uses a proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet color is black.
Speaker Terminal: The subwoofer enclosure uses a single set of 4 AWG binding posts to connect your amplifier to the speaker box. The binding posts are located on the left side of the box when facing the enclosure.
Power Handling: The subwoofer can handle up to 150 watts RMS power and 300 watts peak power.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
This sub and enclosure combo is awesome! I wanted to add a little bass to my 2006 Tiburon, I have this powered by a 200.2 punch amp and it booms like I have a big system in my car. Love the bass and I can agrivate my neighbors if the need ever arises. Great Product.
SurgicalTech from Port Richey, FL