High-power 6-pair speaker selector
Out of Stock
Share this product:
Our take on the Niles HPS-6
Building a multi-room audio system? The Niles HPS-6 lets you send music from a single amplifier or receiver to six pairs of speakers throughout your home, and gives you independent on/off control of each pair. Selectable impedance-magnifying circuitry prevents damage to your receiver or amp, even when you're driving all six pairs at once.
- handles up to 250 watts per channel
- selectable impedance magnification safeguards your system
- requires an amplifier or receiver capable of driving a 4-ohm load
- accepts speaker wires up to 12 gauge or pin connectors
- includes room/speaker labels
- rugged all-metal chassis
- 17"W x 2-1/16"H x 8-5/8"D
- warranty: 10 years
What's in the box?
Download owner's manual
- Speaker selector
- Sheet of self-adhesive Room/Zone Labels
- Installation and Operation Guide
- Warranty and Registration card
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
chassis is component-sized (17" wide) and made from durable black metal with padded feet.
Each set of speaker outputs has an on/off switch so any combination of
connected speakers can be played at any given time.
Protection Switch: The impedance
protection switch on the front of the
unit safeguards the
receiver or amplifier even when all 6 pairs of speakers are playing.
Note: You will need to
activate the "Protection" switch whenever the overall system impedance
might fall below 4 ohms. It is recommended to verify that the receiver
or amplifier is capable of driving a 4-ohm load.
Protection: This speaker selector is equipped with a manual override for the
protection circuit that enables you to defeat the front panel protection switch
and maintain constant impedance protection. This will safeguard your amplifier
from being overdriven due to accidental or improper use.
Terminals: There are six removable speaker output terminal blocks and one
removable speaker input terminal block. These
connectors make it easier to wire the speakers to the selector.
Each terminal block can accommodate up to 12 gauge wire.
Labels: Included are 72 pre
printed and 6 blank label stickers for easy identification of the front panel controls.
- Frequency Response: 20Hz-20kHz
Handling: 250 watts per
channel RMS at 8 ohms
Reviews for the
Average Customer Review:
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Niles HPS-6, please visit the Crutchfield website product
Find the gear that's right
Ask an expert
Your Crutchfield Advisor knows the gear inside and out.
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963