MultEQ tuning kit for the Alpine PXA-H100

IN STOCK

16 people say 

• tuning kit works in concert with Alpine's PXA-H100 IMPRINT Audio Processor
• includes a calibration CD-ROM, microphone and cables, and a junction box for connections

Factory system upgrade module with cradle for iPhone® or iPod touch®

IN STOCK

40 people say 

• package includes DSP (digital sound processor) master unit, cradle for iPhone or iPod touch, and wireless remote
• 4-channel internal amplifier (17 watts RMS x 4 at 4 ohms)
• Apple®-certified dock works with iPhone (2G/3G/3GS/4/4S) and iPod touch (1st/2nd/3rd/4th gen)

2-channel line output converter for adding amps to your factory system

IN STOCK

53 people say 

• 2-channel active line output converter
• 2 speaker-level inputs with 400 watts RMS power handling
• AccuBASS circuitry restores bass signal

Tunes your Alpine receiver to your vehicle's acoustics

OUT OF STOCK

34 people say 

• audio processor for use with most 2008 Alpine Ai-NET receivers
• IMPRINT sound technology adjusts receiver output to match vehicle acoustics

Active 3-Way Electronic Crossover

IN STOCK

4 people say 

• Two pairs of inputs
• 3 pairs of outputs (subwoofer/front/rear)
• front/rear variable 35-400 Hz at 18 dB per octave (20X multiplier on front)

6-channel line output converter with bass restoration — add amps to your factory system (Gray)

IN STOCK

1 person says 

• 6-channel line output converter (Salmon Gray)
• designed to work with any factory stereo
• AccuBASS bass restoration circuitry

6-channel line output converter with bass restoration — add amps to your factory system (White)

IN STOCK

1 person says 

• 6-channel line output converter (Sierra White)
• designed to work with any factory stereo
• AccuBASS bass restoration circuitry

Bass processor (White)

IN STOCK

10 people say 

• white processor with wired dash-mount bass remote
• increases bass response from your system
• 2-channel preamp inputs and outputs

Bass processor (Gray)

LOW STOCK

10 people say 

• gray processor with wired dash-mount bass remote
• increases bass response from your system
• 2-channel preamp inputs and outputs

Trunk-mount 2-channel equalizer with level matching (Gray)

OUT OF STOCK

1 person says 

• dual 13-band equalizers with level matching controls
• gray steel chassis with gold-plated RCA jacks
• top-mounted controls for easy adjustment

Trunk-mount 2-channel equalizer with level matching (White)

LOW STOCK

1 person says 

• dual 13-band equalizers with level matching controls
• white steel chassis with gold-plated RCA jacks
• top-mounted controls for easy adjustment

Bass restoration processor with SPL/voltage display

LOW STOCK

• increases bass response from your system
• speaker- and preamp-level inputs
• SPL meter displays sound pressure level and battery voltage

Digital signal processor, 12" sub, sub amplifier, and cradle for iPhone® or iPod touch®

IN STOCK

25 people say 

• package includes DSP (digital sounds processor) master unit, subwoofer in enclosure, subwoofer amplifier, cradle for iPhone or iPod touch, and wireless remote
• 4-channel internal amplifier (17 watts RMS x 4 at 4 ohms)
• 12" subwoofer and 300 watts RMS amplifier

Bass processor with aux input for factory or aftermarket systems (Gray)

IN STOCK

2 people say 

• gray bass processor with auxiliary input and wired remote
• increases bass response from your system
• works with any stereo — factory or aftermarket

Bass processor with aux input for factory or aftermarket systems (White)

LOW STOCK

2 people say 

• white bass processor with auxiliary input and wired remote
• increases bass response from your system
• works with any stereo — factory or aftermarket

In-dash equalizer with line driver

IN STOCK

4 people say 

• in-dash equalizer with line driver
• steel chassis with gold-plated RCA jacks
• 4-band EQ (125, 500, 2000, and 8000 Hz) with parametric equalization for bass (adjustable from 40 to 80 Hz, +/-12 dB)

6-channel line output converter with equalizer — add amps to your factory system (White)

OUT OF STOCK

10 people say 

• 6-channel line output converter
• designed to work with any factory stereo
• 6 high-level inputs

6-channel line output converter with equalizer — add amps to your factory system (Gray)

IN STOCK

10 people say 

• 6-channel line output converter
• designed to work with any factory stereo
• 6 high-level inputs

In-dash equalizer with crossover and line driver

LOW STOCK

4 people say 

• preamp/equalizer and subwoofer crossover
• 3-band EQ (+/-12 dB at 125, 1,250, and 10,000 Hz) with parametric EQ for bass (+/-12 dB at 40 to 80 Hz)
• front and rear panel auxiliary inputs

6-channel digital signal processor

IN STOCK

1 person says 

• time alignment adjustments for front and rear speakers
• switchable 5.1 surround sound simulation
• SHOCwave™ variable bass restoration (0-12 dB, 1 octave below fundamental note)

Trunk-mount 2-channel equalizer with 2-way crossover (Gray)

LOW STOCK

1 person says 

• dual 13-band equalizers with level matching controls
• gray steel chassis with gold-plated RCA jacks
• Linkwitz-Riley 2-way crossover (90 Hz at 24 dB/octave)

Trunk-mount 2-channel equalizer with 2-way crossover (White)

LOW STOCK

1 person says 

• dual 13-band equalizers with level matching controls
• white steel chassis with gold-plated RCA jacks
• Linkwitz-Riley 2-way crossover (90 Hz at 24 dB/octave)

Sound processor for use when adding amps and speakers to a factory system

IN STOCK

11 people say 

• system integration sound processor with automatic digital EQ
• 120-band digital equalizer
• 2 sets of preamp outputs for connection to external amplifiers

30-band car equalizer

IN STOCK

• 1/3 octave, +12 to -12 dB per band
• input and output controls with clip indicator LEDs
• up to 9 volts RMS output

Plug and Play digital signal processor with built-in 5-channel amplifier

IN STOCK

1 person says 

• digital signal processor for Helix Plug and Play factory system upgrade
• 35 watts RMS x 4 at 4 ohms + 160 watts RMS x 1 at 2 ohms
• Plug and Play connection for optional PP7E subwoofer

Programmable 8-channel digital signal processor

IN STOCK

1 person says 

• DSP settings and adjustments made via laptop or PC through USB port
• 8 preamp outputs (up to 8 volts)
• time alignment,: frequency filters,: 31-band equalization,: and more

Digital sound processor

IN STOCK

5 people say 

• audio processor for use with any receiver
• IMPRINT sound technology adjusts receiver output to match vehicle acoustics
• surround sound decoding, plus Dolby Pro Logic II decoding

Programmable 8-channel digital signal processor

IN STOCK

• inputs: 6 RCA preamp, 4 speaker-level, 1 optical SPDIF
• 8 preamp outputs (4 volts)
• time alignment,: frequency filters,: 30-band equalization,: and more

Digital sound processor

IN STOCK

14 people say 

• automatic equalization and time correction
• built-in amplifier (18 watts RMS x 8 @ 4 ohms/30 watts RMS x 8 at 2 ohms)
• 8-channel preamp inputs and outputs

4-channel car amplifier with built-in programmable DSP — 100 watts RMS x 4

• 340 watts RMS x 2 bridged at 4 ohms
• DSP settings and adjustments made via laptop or PC through USB port
• 30-band graphic EQ on every channel