Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofer
Tweeter
Crossover
Dimensions
Woofer
Material: The light, rigid braided glass fiber woofer cone is
humidity resistant. The butyl rubber surround is resistant to ultraviolet rays,
temperature extremes, and humidity to add to the speaker's reliability and
longevity.
Phase Plug: The bullet-shaped phase plug in the
center of the woofer ensures a smooth, flat off-axis frequency response by
preventing the higher frequency sound waves emanating from one side of the
cone from interfering with sound waves from the other side of the cone.
Basket: The woofer features a basket made of 20% glass fiber
filled ABS.
Voice Coil: The voice coil is wound around a 1" diameter
low-mass Kapton former, ensuring no coil deformation.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum
and
dome, producing a broad sound stage. The tweeter has a Neodymium magnet to
provide a powerful magnetic field for the voice coil, while still maintaining
the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at approximately 15° or approximately 30°.
The top of the angle mount cup and the bottom of the flush mount cup can be
combined to create another surface mount (non-angled).
Crossover
Components: Focal uses audiophile grade polypropylene
capacitors and air core inductors to ensure high definition and a dynamic
sound quality.
Tweeter Level: You can adjust the output level of the tweeter
on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order, 12 dB per
octave low-pass and high-pass filters. The crossover frequency for both is 5,000
Hz.
Wiring: The inputs and outputs are screw terminals; they
will accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
| |
Flush Mount |
Surface Mount |
Angled Surface Mount |
| Mounting Height |
0.19" |
0.965" |
1.185" |
| Depth |
0.88" |
0.678" (screw depth) |
0.685" (screw depth) |
| Frame
Diameter |
1.99" |
1.77" |
1.825" |
| Cutout
Diameter |
1.80" |
N/A |
N/A |
Crossover:
- Width: 2.595"
- Height: 1.308"
- Depth: 4.730"
