Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofers
Tweeters
Crossovers
Woofers
Plus One+ Woofer Cones:
Each speaker uses a cone significantly larger than other speakers of the same
size. This is accomplished by using a new basket design and hi-roll surround.
The Plus One+ design offers greater bass output and a significant increase in
efficiency.
Woofer
Materials: Each woofer is constructed from Injection-Molded Polypropylene.
This process of cone molding assures a uniform cone thickness for superior
linearity and clarity. It is also lighter weight and more rigid for decreased
distortion and improved bass response.
Hi-roll Rubber
Surrounds: The hi-roll rubber
surrounds allow the woofers a greater range of movement, resulting in longer
X-max and more bass output.
Applications: Infinity's mounting system allows the speaker
to fit in 6-1/2" and 6-3/4" applications. Plastic adapter rings are included for
each speaker.
Tweeters
Tweeter
Material: Each 1" tweeter
uses an edge-driven textile dome for smooth, accurate highs.
Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you
several different ways to mount the tweeters:
- I-Mount Tweeter Mounting
System: The tweeters can be surface- or flush-mounted with Infinity's innovative I-Mount system:
- Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the
mounting location, then inserting and locking the tweeter into the cup.
- Flush
Mount: Flush mounting is made easy through the use of the threaded
flush-mount adapter and plastic locking nut. Once a cutout is made, the
flush-mount adapter (with the tweeter installed) is inserted into the hole.
The large plastic locking nut is threaded onto the adapter (from behind the
mounting surface) to hold the complete assembly securely in place. When
flush mounted, the tweeters may be angled for optimum response and imaging.
- Starfish Mounting
Brackets: The Starfish mounting
brackets allow the tweeters to be installed in factory locations behind the
grilles:
- Surface Mount
(behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting
surface behind the grille panel. Then, the tweeter is
inserted into the bracket and locked into place.
- Flush Mount (behind
grille panel):
Once the Starfish bracket is trimmed, it is dropped into the cutout in
the mounting surface behind the grille panel. Then, the tweeter is
inserted into the bracket and locked into place.
- Bottom Mount (to
grille panel):
Once the Starfish bracket is trimmed, it is secured to the underside of
the grille panel. The tweeter must be
inserted into the bracket and locked into place before the bracket is
mounted.
- Flush Mount (in-dash
location): Once the Starfish
bracket is trimmed, it is dropped into the cutout in the dash. Then, the
tweeter is
inserted into the bracket and locked into place.
Tweeter
Mounting Dimensions:
|
|
I-Mount Surface Mount |
I-Mount Flush Mount |
Starfish Surface Mount (behind grille panel) |
Starfish Flush Mount (behind grille panel) |
Starfish Bottom Mount (to grille panel) |
Starfish Flush Mount (in-dash location) |
|
Mounting
Height |
0.955" |
0.75" |
0.925" |
0.475" |
N/A |
0.075" |
|
Depth |
0.535" (screw
depth) |
0.867" |
0.505" |
0.455" |
0.995" |
0.885" |
|
Frame
Diameter |
1.6875" |
2.005" |
2.385" |
2.425" |
2.985" |
2.985" |
|
Cutout Diameter |
N/A |
1.75" |
N/A |
1.685" |
N/A |
2.565" |
Crossovers
2-Way Crossovers:
These speakers include computer-optimized, voice-matched crossovers. Each
crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and
an 18dB/octave, 3.5kHz low-pass network for the woofer.
Selectable
Tweeter Output Level: Each crossover allows you to select the tweeter output level according to system
requirements and personal preference. The tweeter level may be set to "+3 dB" or
"0 dB."
Crossover Connections:
The crossover inputs and outputs are gold-plated screw terminals.
Crossover Dimensions: W = 3.475",
H = 1.1875", D = 4.5625"
