Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Inputs and Outputs Notes
Specifications
Features
Logo Badge: The logo badge on
the top of the amplifier glows blue during operation. For installation
flexibility, the badge can be rotated 90 degrees in either direction, or a full
180 degrees.
Note: A 2.5mm Allen wrench
is required to rotate the logo badge.
Protect LED: The red
protect LED illuminates if the internal heatsink reaches 194 degrees Fahrenheit,
or the amplifier senses that a direct short is present on the speaker outputs.
Variable Filter: The internal
filter can be set for low-pass, high-pass, or full-range operation. In the
low-pass and high-pass modes, the filter can be adjusted from 40 to 400 Hz. In
each case, the filter has a slope of 12 dB per octave.
Twin-T Bass EQ: For added low
frequency performance, this amplifier has a 0 to 15 dB variable bass boost
centered at 45 Hz.
Preamp Outputs: The
preamp output jacks provide a convenient source for daisy-chaining an additional
amplifier without running an extra set of RCA cables from the front of the
vehicle to the amplifier location. These outputs provide a full-range signal.
Remote Monitoring Display
Compatible: This amp has a port that allows you to connect an optional
Remote Monitoring Display (RMD), which shows the amps current voltage.
Neon Accent Kit Compatible:
This amp is compatible with an optional blue neon accent kit. The neon tubes
simply snap into the outer rim of the amp cover. Once the power leads are
connected, the neon tubes will turn on with the amp.
Inputs
and Outputs Notes
Right Side of Amplifier:
- B+ (power): 0.545"
screw terminal
- B- (ground): 0.545"
screw terminal
- R (remote turn-on):
0.339" screw terminal
- Speakers: 0.339" screw
terminals
- RMD: phone-type jack that
allows you to connect an optional Remote Monitoring Display
Specifications
Continuous Power
Output:
- Into 4-ohm
Stereo: 50 watts x
2
- Into 2-ohm
Stereo: 75 watts x
2
- Into 4-ohm
Bridged: 150 watts
x 1
Maximum Power
Output:
- Into 4-ohm
Stereo: 80 watts x
2
- Into 2-ohm
Stereo: 125 watts x
2
- Into 4-ohm
Bridged: 250 watts
x 1