Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The PAC aPAC-NS2
Dual Auxiliary Audio Input Module allows you to connect two external audio
sources to select 2006-2010 Nissan and Infiniti factory radios. The aPAC-NS2 integrates
two auxiliary audio sources directly to the Nissan or Infiniti factory radio via an RCA
and/or 3.5mm (minijack) connection for the highest possible sound quality.
Compatibility: The aPAC-NS2 Dual Auxiliary Audio Input Module is
compatible with select 2006-2010 Nissan and Infiniti vehicles equipped
with a factory radio which supports Satellite Radio. The PAC aPAC-NS2 is
compatible with the following Nissan and Infiniti vehicles (as of August 2010).
Note: The factory radio must have a "SAT" button
and a "CH", "CHANNEL", "CAT", or "CATEGORY" button to be compatible. The aPAC-NS2 retains most vehicle's factory installed
Satellite Radio (if equipped). You will need to remove the factory Satellite
Radio in 2006-2007 Infiniti vehicles. Factory radios with an "iPod Menu"
button are not compatible. Vehicle equipped with factory navigation are not
compatible. Please use the
Crutchfield Car Selector to verify compatibility with your vehicle.
Dual Auxiliary Inputs: The PAC aPAC-NS2 is equipped with two separate
auxiliary inputs (Aux 1 & Aux 2). Each auxiliary input features a female stereo RCA connection
and a right-angle male stereo minijack (3.5mm) connector. The stereo RCA
connection is attached to the module via a 9" cable, while the stereo minijack
connector is attached to the module via a 6' cable.
Note: If both the 3.5mm connector and stereo RCA connections are
used on the same input, make sure to only have one of the two sources powered on
at one time.
Dip Switches: The uPAC-NS2's four dip switches should remain "Off" for
Vehicle Harness: You will need to disconnect the Nissan or Infiniti
factory radio's harness and plug the PAC uPAC-NS2's vehicle harness into the back
of the Nissan or Infiniti factory radio. The Nissan or Infiniti factory radio's
harness then plugs into the uPAC-NS2's vehicle harness.