Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Compatibility: The Kenwood CMOS-310 Universal Multi-View
Camera can be used as a rear-view camera with Kenwood in-dash monitors; however, the standard
composite video output (RCA plug) extension cable makes it compatible with
virtually any mobile video monitor.
Note: The CMOS-310 can also be used as a front camera with the
Kenwood DNX7160, DNX7180, DNX7190, DNX9960, DNX9980, DNX9990 in-dash navigation receivers.
Waterproof Chassis: The camera is built into a compact waterproof aluminum case, making it
perfect for mounting outside the vehicle.
Super Wide Viewing Angle: The 190° horizontal and
151° vertical viewing angles provide an excellent near field view of anything
behind you. The camera gives you a mirror image for rear view confirmation.
CMOS Optics: The 1/4" color CMOS image sensor has approximately 310,000 pixels to deliver a high
quality picture.
Illumination Range: The multi-view camera provides an illumination
range of approximately 0.9 to 100,000 lux. It offers less light distortion from nearby light sources.
Switch Unit: The included dash-mount switch unit can be used to switch the
multi-view camera's display mode, view/hide the guidelines display, and adjust
the camera to better suit your vehicle; when connected to select Kenwood in-dash
navigation head units.
- Display Modes: The CMOS-310 camera system can display 5 different
camera images.
- Super Wide View: wide-angle image covering a horizontal angle
of approximately 190°
- Wide View: camera image covering a horizontal angle of
approximately 135°
- Overhead View: image seen from the viewpoint straight up
above the vehicle
- PinP View: the overhead view is displayed on the upper half
of the screen, while the wide view is displayed on the lower half
- Corner View: the views seen from the two corners of the
vehicle are displayed on the left and right halves of the screen
- Image Adjustments: The multi-view camera features the
following image adjustments.
- Centering: adjusts the center of the camera installation
position
- Right-and-Left Angle: adjusts the horizontal angle (in the
rotary direction) of the camera installation position
- Up-And-Down Angle: adjusts the vertical angle (inclination)
of the camera installation position
- Guideline Adjustments: The multi-view camera features
the following guideline adjustments.
- Size: adjusts the overall size of guidelines displayed in the
wide or overhead view mode
- Horizontal Direction: adjusts the left-right positioning of
the guidelines displayed in the wide or overhead view mode
- Vertical Direction: adjust the length of the guidelines
displayed in the wide or overhead view mode
- Red Line Position: adjusts the position of the red line
display in the wide or overhead view mode; the red line can be used
independently to set the reference line for the vehicle parking position
Note: The dash-mount switch unit is compatible with the Kenwood
DNX7160, DNX7180, DNX7190, DNX9960, DNX9980, DNX9990 in-dash navigation receivers.
Mounting: The multi-view camera comes supplied with a metal
mounting bracket that attaches to the camera with two supplied machine screws
and attaches to your vehicles with its self-adhesive backing or included
mounting screw. Once the camera is installed in the mounting bracket the
camera's angle can be adjusted to work in your application. The dash-mount
switch unit comes with two-sided tape to attach the switch unit to your dash,
near the driver seat.
Note: The multi-view camera should be installed at a height of
1.8' or more.
Dimensions:
- Camera (with bracket): 1.385" (w) x 1.035" (h) x 1.345" (d)
- Control Switch: 1.135" (w) x 0.465" (h) x 1.485" (d)
