Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Fixed-Position: The Sanus Premium Series VLL5 fixed-position
wall-mount bracket is perfect for viewing your wall-mounted flat-panel TV at eye
TV Capacity: The Sanus Premium Series VLL5 wall-mount bracket is
designed to support flat-panel TVs from 51" to 80", weighing up to 125 lbs.
VESA Bolt Pattern: The VLL5's TV bracket consists of two
vertical brackets with multiple slots that can accommodate a vertical hole
spacing of 200mm-400mm on back of your TV. The vertical brackets slide along the
VLL5's horizontally-mounted wall bracket, accommodating a horizontal hole
spacing of 200mm-700mm on back of your television. The Sanus VLL5 comes with M4,
M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV.
Given the mounting bracket's range of motion, it will accommodate the following
VESA hole patterns in accordance with industry standards set by the Video
Electronics Standards Association:
- 200mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 600mm x 400mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Construction: The VLL5 bracket is constructed of heavy-gauge
steel with a durable powder-coated black finish.
Perfect Positioning: Your TV can slide from side-to-side on the VLL5
wall-mount for perfect positioning on the wall. There is also a level adjustment
screw on top of either TV bracket to raise or lower the sides of the TV.
Note: The wall plate must be mounted to wall studs or
anchored to a brick, block, or concrete wall using the supplied lag bolts
(and wall-anchors). The slots in the wall plate can accommodate a variety of
stud spacing, allowing you to easily mount the VLL5 to wall studs that are
16" or 24" on center.
Safety Tabs: Once the wall bracket is anchored to the wall
studs and the two TV brackets are attached to the back of your television, the
TV brackets hook into the wall bracket. Integrated safety tabs on the TV
brackets provide a safe and easy connection to the wall bracket you can hear.
Click Stands: Built-in ClickStands on each TV bracket temporarily hold
your mounted TV out from the wall for easier cable connections.
Installation Tools: The following tools are recommended for
mounting the VLL5:
- Tape measure
- Stud finder/level (included)
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- TV Brackets:
- Width = 3.0625"
- Height = 10.75-18.75"
- Depth = 9.75"
- Wall Plate:
- Width = 30.0"
- Height = 5.0"
- Depth = 0.5625"