Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofer
Midrange
Tweeter
Crossover
Dimensions
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base
and is coated with a uniform deposit of hollow glass microballs. The addition of
the Polyglass layer significantly increases the cone's rigidity without adding
much weight. This combination takes advantage of the accuracy and neutrality of
the hard outer surface, but maintains the superior damping characteristics of
the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet
rays, temperature extremes, and humidity to add to the speaker's reliability and
longevity.
Zamak Basket: The woofer features a cast Zamak basket. Zamak
is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.
Voice Coil: The voice coil is wound around a 1" diameter
low-mass Kapton former, ensuring no coil deformation.
Midrange
Polyglass Cone: Like the woofers, the midrange drivers use
Polyglass cones with butyl rubber surrounds.
Zamak Basket: The midrange drivers also feature a cast Zamak
basket.
Neodymium Magnets: The midrange drivers use Neodymium
magnets, which have the same magnetic flux power as a ceramic magnet 10 times
their size, reducing the size and weight of the speaker.
Size: The 4" midrange drivers will fit most factory 4" speaker
locations. They can be top or bottom mounted and have these dimensions:
- Depth (top mount): 1.57"
- Mounting height: 0.33"
- Flange height: 0.19"
- Depth (bottom mount): 1.76"
- Tweeter protrusion: 0.14"
- Cutout diameter: 3.672"
- Frame diameter: 4.022"
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted
aluminum/magnesium dome, producing a broad sound stage. The tweeter has
a Neodymium magnet to provide a powerful magnetic field for the voice
coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at one of two angles; approximately 10° and
approximately 30°.
Crossover
Components: Focal uses audiophile grade polypropylene
capacitors and solid core inductors to ensure high definition and a dynamic
sound quality.
Tweeter Level: You can adjust the output level of the tweeter
on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order (12
dB/octave) low-pass, band-pass, and high-pass filters. The crossover points are
400 Hz and 4,000 Hz.
Wiring: The inputs and outputs are screw terminals; they
will accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
| |
Flush Mount |
Angled Surface Mount |
| Mounting Height |
0.274" |
1.186" |
| Depth |
0.688" (1.01" including screw) |
0.527" (screw depth) |
| Frame
Diameter |
2.054" |
1.842" |
| Cutout
Diameter |
1.828" |
N/A |
Crossover:
- Width: 3.313"
- Height: 1.568"
- Depth: 5.085"
