Features
i-Personalize
DVD/Video CD Controls
Changer Controls
Input and Output Notes
Features
Mobile Multimedia Station:
Alpine's line of Ai-NET Mobile Multimedia Stations allow you to connect and
control a wide range of in-car audio and visual systems, such as DVD/CD/MP3
changers, rear seat monitors, and navigation systems, from an in-dash control
center.
Motorized, 6.5" Wide Touchscreen
Monitor: The IVA-W200 has a motorized 6.5" wide, touchscreen monitor (with
16:9 aspect ratio) that serves as a video monitor and system information
display.
PulseTouch: The unit's
touchscreen features "PulseTouch," which provides tactile feedback, along with
audible and visual confirmation, to the user to confirm the input of commands.
It uses different vibrations and pressures that simulate what it feels like when
you tap a real button, hold a button down, move a slider or touch where no
screen commands exist.
Monitor Angle Adjustment:
You can adjust the monitor's angle for better visibility. You can choose one of
four angles.
Video Lock-out Feature: For
safety and legal reasons, the IVA-W200 features a video lock-out feature to
prevent the viewing of a video source while the vehicle is in motion. To watch a
video source, the vehicle must be parked with the ignition in the ACC or ON
position. The vehicle's parking brake must be engaged, disengaged, and engaged
again while the foot brake is held in.
Illumination Control: You can
select one of the following dimmer settings:
- Auto: adjusts the
brightness of the background illumination of the monitor depending on the
ambient light in your vehicle
- On: keeps the background
illumination of the monitor dark
- Off: keeps the background
illumination of the monitor bright
Background Screen: You have a
choice of 2 different background textures. These backgrounds are visible when a
CD, MP3/WMA, or the tuner is selected. When "Auto Background" is activated, the
background texture will change each time the ignition key is turned off and
turned on again.
Display Modes: You can select
one of the following display modes:
- Mode 1 (Wide): evenly
stretches a 4:3 picture horizontally to fit the wide screen monitor
- Mode 2 (Cinema): displays
a 4:3 picture by stretching out the picture horizontally and vertically.
This mode is good for displaying a cinema-type picture with a 16:9 ratio.
- Mode 3 (Normal): displays
a 4:3 picture at the center of the screen with a vertical black band at each
side
Blackout Display Mode:
When the Blackout mode is activated, the
display turns off to reduce power consumption. The additional power made
available by turning off the display helps enhance sound quality.
Rear Entertainment Function:
The rear entertainment function independently routes different sources to the
front and rear in a vehicle. For example, while listening to the radio or other
audio source in the front, a DVD can be enjoyed in the rear with an optional
rear monitor and headphones; the rear zone signals are passed by RCA composite
video and stereo RCA preamp audio connections.
Simultaneous Function: This
function allows you to watch the video portion of one source, while listening to
the audio portion of another source.
MP3/WMA Playback: This unit can play CD-ROM,
CD-R, and CD-RW discs containing MP3 and WMA files recorded using the ISO 9660
Level 1 or Level 2 formats; constant and variable bit rates from 32 kbps to 320
kbps are supported for MP3 and 32 kbps to 320 kbps for WMA. Discs recorded using
Joliet, Romeo, or other ISO 9660 compliant formats can be played, but file and
folder names may not be displayed correctly. CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and multi-session recordings are supported, but recordings made
using Track At Once or packet writing cannot be correctly played back. Discs
containing both standard CD audio and MP3 data can be played; the unit may be
set to play only the CD audio tracks or both types of tracks. ID3 tag v1 and WMA
tag are supported; track title, artist name and album name ID3 tag data can be
displayed.
Bass Engine:
Bass Engine functions provide control over your system, so you can tailor the
sound to your personal tastes. Bass Engine includes the following functions:
- Bass Control:
- Bass Center Frequency:
Select from 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 130Hz, 150Hz, or 200Hz
- Bass Band Width:
Select from 1 (narrow) to 4 (wide)
- Bass Level: Select
from -7 to +7
- Treble Control:
- Treble Center Frequency:
Select from 10kHz, 12.5kHz, 15kHz, or 17.5kHz
- Treble Level: -7 to +7
Interrupt Feature (NAV.MIX)
With an Alpine navigation system connected to the IVA-W200, the voice guidance
of the navigation system will be mixed with the radio or CD audio. You can
adjust the volume level of the voice guidance. If you use this unit connected to
an external audio processor, use the built in amplifier. You cannot use this
function with an external amplifier.
iPod Full Speed:
When used with the optional KCE-422i
Alpine Full Speed Connection cable (item number 500KCE422i), your receiver can interface
with any Apple iPod with a dock connector. You can quickly and easily search
through all of the music contained on your iPod through Playlist, Artist, or
Album searches. You can view Artist, Album, Song Information and Song Number
right on the head unit's display. The IVA-W200 will not navigate or display video files from video capable iPods. The unit can be used with the following iPod
versions:
- Third generation iPod:
Ver.2.3
- Fourth generation iPod:
Ver.3.0.2
- iPod photo: Ver.1.0
- iPod mini: Ver.1.3
- iPod nano: Ver.1.0
- iPod video
Direct Search: When operating
your iPod through the Full Speed connection, you can use the Direct Search
function in Playlist, Artist, Album, or Song mode to quickly locate your music.
Using an onscreen direct search bar, you can quickly jump over a designated
percentage of your song content.
Satellite Radio Ready: There
are several options for connecting an optional XM or SIRIUS Satellite Radio
receiver to the IVA-W200. To receive XM Satellite Radio, you can connect the
optional Terk XMD1000 Universal tuner (209XMD1000) and the Terk XM Direct Smart
Digital Adapter for Alpine (209XMDALP1). To receive SIRIUS Satellite Radio, you
can connect the optional SIRIUS tuner for Alpine (item number 607SIRALP1) directly to
the head unit. A portable satellite radio receiver can be connected to the head
unit via an auxiliary input adapter. A compatible antenna and a subscription are
also required to receive satellite radio programming from SIRIUS or XM.
HD Radio Ready: The IVA-W200
can receive HD Radio signals when the TUA-T550HD HD Radio Tuner Module
(item number 500TUAT550) is connected via the Ai-NET connector. While receiving HD Radio,
the unit can automatically switch between the analog and digital signals, or you
can manually switch to the analog signals exclusively.
Bluetooth Interface Ready: With
the optional KCA-100BT Bluetooth adapter (item number 500KCA1BT), you can make and
receive calls hands-free on your Bluetooth-capable cellular phone, and
communicate through an included microphone and your vehicle's speakers.
USB Adapter Ready: With the
optional KCA-620M USB adapter (item number 500KCA620M), you can connect and control
MP3 players that have USB connections. In addition, if you have MP3s stored on a
USB thumb drive, you can select and play those files from the head unit.
Auxiliary Input Ready: With the
addition of the optional KCA-121B Ai-NET/RCA interface cable, the KCA-801B
auxiliary input adapter, or the KCA-410C Versatile-Link Terminal, the audio from
an auxiliary source can be played through this unit. When the KCA-121B interface
cable is used, a CD changer cannot be connected to the head unit; the KCA-801B
auxiliary input adapter allows you to connect an auxiliary source and an Ai-NET
changer to the head unit. The KCA-410C Versatile-Link Terminal allows you to
feed audio from up to two auxiliary sources and two Ai-NET CD changers to the
head unit.
Steering Wheel Remote Compatibility: The IVA-W200 has
a "steering remote control" jack on the back
panel. When used with the optional SWI-ALP interface (item number127SWIALP), you can
retain the use of your factory steering wheel and/or rear seat radio controls when
replacing the factory head unit in select vehicles. The SWI-ALP is compatible
with over 95% of the vehicles made from 1986 to the present. Compatible vehicles
include many Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge,
Ford, GMC, Honda, Hummer, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus,
Lincoln, Mazda, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Plymouth,
Pontiac, Saab, Saturn, Suzuki, Toyota, and Volkswagen vehicles and Harley
Davidson motorcycles. Please consult "What Fits My Car" to see if your vehicle
is compatible.
i-Personalize
Overview: The Alpine IVA-W200
features i-Personalize, which provides the user an extraordinary degree of
system personalization. You can select from a wide variety of audio, video and
display modes to suit your personal tastes.
Visual EQ Mode: You can select
one of the following preset modes suitable for the subject image:
- Night Mode: suitable for
movies in which dark scenes frequently appear
- Soft: suitable for CGs and
animated films
- Sharp: suitable for old
movies where images are not clearly shown
- Contrast: suitable for
recent movies
- User Memory (P-1, P-2):
You can change and save Brightness, Color, Tint, Contrast, and Sharpness
values from any of the presets in up to two user memories
Background Data Download: You
can download wallpaper from Alpine's website to a CD-R or CD-RW, then upload and
store the wallpaper in the IVA-W200.
External Audio Processor: When
an optional Alpine external audio processor is connected to this unit, you can
operate it from the unit. Dozens of settings can be adjusted, including
crossover adjustment, time correction, phase switching, EQ adjustments, surround
sound adjustments, and speaker levels.
DVD/Video CD Controls
DVD Menu Direct Touch Control:
The unique PulseTouch touchscreen allows you to activate selections on the DVD
main menu by directly touching the screen on the desired selection instead of
navigating choices using cursors.
DVD Control Menu: During DVD
playback, the control menu is accessible by touching the screen. The 2-page menu
appears at the bottom of the screen allowing you to skip tracks forward or
backward, stop or pause playback, access the DVD menu, change the audio
language, subtitle language, camera angles, and change the display modes. You
can also access a "10-key" numeric keyboard for direct chapter access. If
desired, you can access a more traditional cursor-type menu for DVD control.
Dolby Digital and DTS
Compatibility: When the optical digital output (standard Toslink) on the
rear of the head unit is connected to an optional Alpine digital audio
processor, you can enjoy Dolby Digital and DTS surround.
Pre-stop Function: When the
Pre-stop function is used, the position at which playback is stopped is stored
in the memory, and playback resumes from that position.
Step/Slow
Motion Playback: When a DVD or Video CD is in the pause mode, you may move
forward through the program being played one step (frame) at a time, or in one
of the following slow motion speeds: 1/2 or 1/8. When playing a DVD, you can use
slow motion playback in the reverse direction.
Fast-Forward/Fast-Reverse:
While a DVD or Video CD is playing, you can view the program in double speed in
either direction by touching and holding the fast-forward or fast-reverse button
on the touchscreen for more than 1 second. If held for 5 or more seconds,
playback at 8x speed in the selected direction will begin. If held for 10 or
more seconds, playback at 21x speed will begin.
Repeat Playback: When
playing a DVD, you can repeat the current title or the current chapter. When
playing a Video CD, you can repeat the current track or the entire disc.
Multi-Angle Display: This
function allows you to choose the viewing angle of scenes that were shot from a
number of different angles.
Note: This function is
limited to DVDs recorded with multiple camera angles.
Parental Lock:
Parental Lock allows you to restrict the playback of DVDs that are unsuitable
for younger viewers. You can select a parental lock rating from 0-8, which is
protected by a 4-digit password.
Digital Output: You can
select a digital output setting of Auto or LPCM. When set to Auto, the digital
output is switched automatically according to the type of audio signals being
played. When set to LPCM, the audio signals recorded on the disc are converted
to 48kHz/16-bit (for DVDs) or 44.1kHz (for Video CDs and CDs) linear PCM audio
signals for output.
Controls for Add-on Components:
The IVA-W200 can control the following optional add-on components: Navigation
System, HD Radio tuner, DVD changer, CD changer, XM or SIRIUS receiver, and
audio processor.
Changer Controls
Compatibility:
This unit is compatible with 6- and 12-disc Alpine Ai-NET CD changers; also,
this unit can control Alpine Ai-NET CD/MP3 changers and DVD changers. Alpine
M-Bus CD changers cannot be controlled by this unit.
Multiple Changer Control: With the addition of an optional adapter, more than one CD changer
can be controlled. One KCA-400C adapter will allow you to connect up to 4 CD
changers, and two KCA-400C adapters will allow you to connect up to a total of 6
CD changers. You can also use the KCA-410C Versatile Link adapter to connect 2
changers and 2 auxiliary input sources.
Input and Output Notes
Optical Digital Output: There is a standard
Toslink optical digital output on the back of the monitor for connecting the
unit to an optional audio processor.
Auxiliary Input: Stereo RCA
jacks and an RCA composite video jack are provided for connecting an external
video source such as a VCR, DVD player, or video game.
Auxiliary Output: Stereo RCA
jacks and an RCA composite video jack are provided for feeding A/V signals to an
optional video monitor. When the Rear Entertainment Function is used and these
jacks are connected to a rear seat entertainment system (e.g. a rear seat
monitor and wireless headphones), your rear seat passengers can view/listen to a
different source than the one selected for the front passengers.
Navigation Input: The IVA-W200
provides a 13-pin RGB jack for connecting an optional Alpine navigation system.
Preamp Inputs/Outputs: When the
system switch is in the Normal position, the IVA-W200 provides preamp outputs
for front, rear, and subwoofer channels. When the system switch is in the EQ/DIV
position, the front and rear preamp connections operate as inputs, allowing you
to connect an optional EQ or audio processor.
Rear Camera Input: A single
composite video input is provided for an optional rear-view camera. If a
rear-view camera is connected, you should also connect the reverse lead
(orange/white wire in the Remote in/out wiring harness) to the vehicle's back-up
lamp circuit. When properly connected, the image from the rear-view camera
appears on the monitor when the vehicle is shifted into reverse.
Remote In/Out: A 6-pin female
Molex jack allows you to connect the remote control plugs from an optional video
monitor or TV tuner.
Note: Some optional
Alpine monitors have touchscreen controls requiring connection of
monitor control wire of the remote harness.
Steering Wheel Remote: A
minijack allows you to connect the optional SWI-ALP interface (item number127SWIALP).
